From what i've gathered, there are many solutions to my problem but i'd appreciate some suggestions on where to start. here's the stack we're running on heroku currently:
Rails on puma
mongoDB
elasticsearch
redis
mini_magick
What goes into the decision of using Elastic Beanstalk vs OpsWorks vs CloudFormation vs just setting up everything manually myself? Also, I'd really prefer, for financial reasons, not to use some third party service like Docker if possible. The plethora of options leaves me a little confused as to where to begin or how to even choose. Background: right now I really like Heroku b/c i don't have to think too much about sysadmin (on my team i'm the only developer), but we were recently given a lot of annual AWS credits so it seems to make financial sense for us to shift over to AWS.
I want to expand on Mark’s great answer.
Available alternatives
Since you’re the sole developer, Cloud Formation and OpsWorks aren’t good options for you.
With OpsWorks you’ll need to write, or at least be aware of, the Chef automation code that configures your instances. On the other hand, Cloud Formation by itself isn’t enough. It will help you with AWS cloud resources creations, but you will still need to figure out how to orchestrate your applications deployment, just for starters.
Neither of these options can give you everything you need to run and deploy your code like Heroku does right out of the box. You’ll need to implement parts of it by yourself.
Since rolling your own automation on top of EC2 takes even more effort than the options above, I think you have two alternatives within AWS that will fit your needs:
1) Elastic Beanstalk
It’s the closest you can get to Heroku within AWS. You might have to spend some time getting to know the platform at first since it’s not as intuitive as Heroku, but eventually Elastic Beanstalk will provide you with all the tools you need to continue running your applications without spending time on sysadmin tasks.
2) ECS + Empire
Although you mentioned that using Docker is out of question for you, I still would like to highlight the option of using ECS, Amazon’s Docker orchestration service, as an alternative to Heroku.
By itself, ECS doesn’t provide enough automation to do everything you would expect from a PaaS. The service was intended to be used as a building block which you should extend to fit your needs.
Luckily, the guys from Remind have already done this for you. They have released an open source project called Empire, which according to its own description is “a control layer on top of ECS that provides a Heroku-like workflow”.
Empire is compatible with Heroku’s API, and its command line implements the most important features of Heroku.
Empire is an open source project, so if you choose to use it, you should be prepared to dig into its code from time to time. The documentation isn’t perfect, and although there is some traction around the project, the community isn’t very big.
Overall, it’s a good alternative to Heroku if you’re willing to run your applications using Docker -- and why shouldn’t you?
Addons
The main benefit I see to switching from Redis Labs to Amazon’s Redis service (ElastiCache), other than the fact that you have free AWS credit, is that it’s going to be easier (and cheaper) to secure access to your Redis instances when you also run your applications on AWS.
Overall, it’s relatively easy to replicate the addons you’re using with Heroku when you migrate to AWS. For the third-party addons like Elasticsearch you just continue pointing your application to the relevant endpoint. It’s a bit more complicated to replicate Heroku’s native addons like deploy hooks since you can’t continue to use them when you migrate to AWS. In these cases it’s usually possible to find alternative ways of replicating their functionality within AWS.
If you want to learn about how to migrate the most common addons, I’ve written an article that details how to do that, you can find it here: how to replicate Heroku’s addons on AWS.
Hope this helps.
For your Rails app, Elastic Beanstalk is going to be very similar to Heroku. I would suggest using Elastic Beanstalk if you are already familiar with a PaaS like Heroku. It's probably going to be a bit more difficult to configure at first (there are just a lot more options you can configure), but then it will be a very similar deployment process to what you are used to.
Of course Heroku and most (probably all) of those other services you are using run on top of AWS already, so you would really just be switching from one set of services built on AWS to Amazon's own version of those services. You could possibly continue using some of the same services you are using on Heroku. For example I believe MongoLab is the recommended service for MongoDB on Heroku, and it is my preferred MongoDB-as-a-Service on AWS as well. If you want to use those AWS credits for MongoDB you will have to setup the EC2 servers and install and manage MongoDB yourself.
For Redis you could use Amazon's ElastiCache service or RedisLabs. I've found the features and price to be better with RedisLabs than ElastiCache, but you can use your AWS credits with ElastiCache.
For Elasticsearch you would probably want to use Amazon's new managed Elasticsearch service.
Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 3 years ago.
Improve this question
I'm a beginner RoR programmer who's planning to deploy my app using Heroku. Word from my other advisor friends says that Heroku is really easy, good to use. The only problem is that I still have no idea what Heroku does...
I've looked at their website and in a nutshell, what Heroku does is help with scaling but... why does that even matter? How does Heroku help with:
Speed - My research implied that deploying AWS on the US East Coast would be the fastest if I am targeting a US/Asia-based audience.
Security - How secure are they?
Scaling - How does it actually work?
Cost efficiency - There's something like a dyno that makes it easy to scale.
How do they fare against their competitors? For example, Engine Yard and bluebox?
Please use layman English terms to explain... I'm a beginner programmer.
First things first, AWS and Heroku are different things. AWS offer Infrastructure as a Service (IaaS) whereas Heroku offer a Platform as a Service (PaaS).
What's the difference? Very approximately, IaaS gives you components you need in order to build things on top of it; PaaS gives you an environment where you just push code and some basic configuration and get a running application. IaaS can give you more power and flexibility, at the cost of having to build and maintain more yourself.
To get your code running on AWS and looking a bit like a Heroku deployment, you'll want some EC2 instances - you'll want a load balancer / caching layer installed on them (e.g. Varnish), you'll want instances running something like Passenger and nginx to serve your code, you'll want to deploy and configure a clustered database instance of something like PostgreSQL. You'll want a deployment system with something like Capistrano, and something doing log aggregation.
That's not an insignificant amount of work to set up and maintain. With Heroku, the effort required to get to that sort of stage is maybe a few lines of application code and a git push.
So you're this far, and you want to scale up. Great. You're using Puppet for your EC2 deployment, right? So now you configure your Capistrano files to spin up/down instances as needed; you re-jig your Puppet config so Varnish is aware of web-worker instances and will automatically pool between them. Or you heroku scale web:+5.
Hopefully that gives you an idea of the comparison between the two. Now to address your specific points:
Speed
Currently Heroku only runs on AWS instances in us-east and eu-west. For you, this sounds like what you want anyway. For others, it's potentially more of a consideration.
Security
I've seen a lot of internally-maintained production servers that are way behind on security updates, or just generally poorly put together. With Heroku, you have someone else managing that sort of thing, which is either a blessing or a curse depending on how you look at it!
When you deploy, you're effectively handing your code straight over to Heroku. This may be an issue for you. Their article on Dyno Isolation details their isolation technologies (it seems as though multiple dynos are run on individual EC2 instances). Several colleagues have expressed issues with these technologies and the strength of their isolation; I am alas not in a position of enough knowledge / experience to really comment, but my current Heroku deployments consider that "good enough". It may be an issue for you, I don't know.
Scaling
I touched on how one might implement this in my IaaS vs PaaS comparison above. Approximately, your application has a Procfile, which has lines of the form dyno_type: command_to_run, so for example (cribbed from Heroku Architecture - The Process Model):
web: bundle exec rails server
worker: bundle exec rake jobs:work
This, with a:
heroku scale web:2 worker:10
will result in you having 2 web dynos and 10 worker dynos running. Nice, simple, easy. Note that web is a special dyno type, which has access to the outside world, and is behind their nice web traffic multiplexer (probably some sort of Varnish / nginx combination) that will route traffic accordingly. Your workers probably interact with a message queue for similar routing, from which they'll get the location via a URL in the environment.
Cost Efficiency
Lots of people have lots of different opinions about this. Currently it's $0.05/hr for a dyno hour, compared to $0.025/hr for an AWS micro instance or $0.09/hr for an AWS small instance.
Heroku's dyno documentation says you have about 512MB of RAM, so it's probably not too unreasonable to consider a dyno as a bit like an EC2 micro instance. Is it worth double the price? How much do you value your time? The amount of time and effort required to build on top of an IaaS offering to get it to this standard is definitely not cheap. I can't really answer this question for you, but don't underestimate the 'hidden costs' of setup and maintenance.
(A bit of an aside, but if I connect to a dyno from here (heroku run bash), a cursory look shows 4 cores in /proc/cpuinfo and 36GB of RAM - this leads me to believe that I'm on a "High-Memory Double Extra Large Instance". The Heroku dyno documentation says each dyno receives 512MB of RAM, so I'm potentially sharing with up to 71 other dynos. (I don't have enough data about the homogeny of Heroku's AWS instances, so your milage may vary))
How do they fare against their competitors?
This, I'm afraid I can't really help you with. The only competitor I've ever really looked at was Google App Engine - at the time I was looking to deploy Java applications, and the amount of restrictions on usable frameworks and technologies was incredibly off-putting. This is more than "just a Java thing" - the amount of general restrictions and necessary considerations (the FAQ hints at several) seemed less than convenient. In contrast, deploying to Heroku has been a dream.
Conclusion
Please comment if there are gaps / other areas you'd like addressed. I feel I should offer my personal position. I love Heroku for "quick deployments". When I'm starting an application, and I want some cheap hosting (the Heroku free tier is awesome - essentially if you only need one web dyno and 5MB of PostgreSQL, it's free to host an application), Heroku is my go-to position. For "Serious Production Deployment" with several paying customers, with a service-level-agreement, with dedicated time to spend on ops, et cetera, I can't quite bring myself to offload that much control to Heroku, and then either AWS or our own servers have been the hosting platform of choice.
Ultimately, it's about what works best for you. You say you're "a beginner programmer" - it might just be that using Heroku will let you focus on writing Ruby, and not have to spend time getting all the other infrastructure around your code built up. I'd definitely give it a try.
Note, AWS does actually have a PaaS offering, Elastic Beanstalk, that supports Ruby, Node.js, PHP, Python, .NET and Java. I think generally most people, when they see "AWS", jump to things like EC2 and S3 and EBS, which are definitely IaaS offerings
AWS / Heroku are both free for small hobby projects (to start with).
If you want to start an app right away, without much customization of the architecture, then choose Heroku.
If you want to focus on the architecture and to be able to use different web servers, then choose AWS. AWS is more time-consuming based on what service/product you choose, but can be worth it. AWS also comes with many plugin services and products.
Heroku
Platform as a Service (PAAS)
Good documentation
Has built-in tools and architecture.
Limited control over architecture while designing the app.
Deployment is taken care of (automatic via GitHub or manual via git commands or CLI).
Not time consuming.
AWS
Infrastructure as a Service (IAAS)
Versatile - has many products such as EC2, LAMBDA, EMR, etc.
Can use a Dedicated instance for more control over the architecture, such as choosing the OS, software version, etc. There is more than one backend layer.
Elastic Beanstalk is a feature similar to Heroku's PAAS.
Can use the automated deployment, or roll your own.
As Kristian Glass Said, there is no comparison between IaaS(AWS) and PaaS(Heroku, EngineYard).
PaaS basically helps developers to speed the development of app,thereby saving money and most importantly innovating their applications and business instead of setting up configurations and managing things like servers and databases. Other features buying to use PaaS is the application deployment process such as agility, High Availability, Monitoring, Scale / Descale, limited need for expertise, easy deployment, and reduced cost and development time.
But still there is a dark side to PaaS which lead barrier to PaaS adoption :
Less Control over Server and databases
Costs will be very high if not governed properly
Premature and dubious in current day and age
Apart from above you should have enough skill set to mange you IaaS:
Hardware acquisition
Operating System
Server Software
Server Side Scripting Environment
Web server
Database Management System(Mysql, Redis etc)
Configure production server
Tool for testing and deployment
Monitoring App
High Availability
Load Blancing/ Http Routing
Service Backup Policies
Team Collaboration
Rebuild Production
If you have small scale business, PaaS will be best option for you:
Pay as you Go
Low start up cost
Leave the plumbing to expert
PaaS handles auto scaling/descaling, Load balancing, disaster recovery
PaaS manages all security requirements
PaaS manages reliability, High Availability
Paas manages many third party add-ons for you
It will be totally individual choice based on requirement. You can have details on my PPT Hosting Rails Apps.
There are a lot of different ways to look at this decision from development, IT, and business objectives, so don't feel bad if it seems overwhelming. But also - don't overthink scalability.
Think about your requirements.
I've engineered websites which have serviced over 8M uniques a day and delivered terabytes of video a week built on infrastructures starting at $250k in capital hardware unr by a huge $MM IT labor staff.
But I've also had smaller websites which were designed to generate $10-$20k per year, didn't have very high traffic, db or processing requirements, and I ran those off a $10/mo generic hosting account without compromise.
In the future, deployment will look more like Heroku than AWS, just because of progress. There is zero value in the IT knob-turning of scaling internet infrastructures which isn't increasingly automatable, and none of it has anything to do with the value of the product or service you are offering.
Also, keep in mind with a commercial website - scalability is what we often call a 'good problem to have' - although scalability issues with sites like Facebook and Twitter were very high-profile, they had zero negative effect on their success - the news might have even contributed to more signups (all press is good press).
If you have a service which is generating a 100k+ uniques a day and having scaling issues, I'd be glad to take it off your hands for you no matter what the language, db, platform, or infrastructure you are running on!
Scalability is a fixable implementation problem - not having customers is an existential issue.
Actually you can use both - you can develop an app with amazon servers ec2. Then push it (with git) to heroku for free for awhile (use heroku free tier to serve it to the public) and test it like so. It is very cost effective in comparison to rent a server, but you will have to talk with a more restrictive heroku api which is something you should think about. Source: this method was adopted for one of my online classes "Startup engineering from Coursera/Stanford by Balaji S. Srinivasan and Vijay S. Pande
Well, people usually ask this question: Heroku or AWS when starting to deploy something.
My experiment of using both of Heroku & AWS, here is my quick review and comparison:
Heroku
One command to deploy whatever your project types: Ruby on Rails, Nodejs
So many 1-click to integrate plugins & third parties: It is super easy to start with something.
Don't have auto-scaling; that means you need to scale up/down manually
Cost is expensive, especially, when system needs more resources
Free instance available
The free instance goes to sleep if it is inactive.
Data center: US & EU only
CAN dive into/access to machine level by using Heroku run bash (Thanks, MJafar Mash for the advice) but it is kind of limited! You don't have full access!
Don't need to know too much about DevOps
AWS - EC2
This just like a machine with pre-config OS (or not), so you need to install software, library to make your website/service go online.
Plugin & Library need to be integrated manually, or automation script (public script & written by you)
Auto scaling & load balancer are the supported services, just learn how to config & integrate to your system
Cost is quite cheap, depends on which services and number of hours you use it
There are several free hours for T2.micro instances, but usually, you will pay few dollars every month (if still using T2.micro)
Your free instance won't go to sleep, available 24/7 (because you may pay for it :) )
Data center: around the world. Pick the region which is the best fit for you.
Dive into machine level. So you can enjoy it
Some knowledge about DevOps, but it is okay, Stackoverflow is helpful there!
AWS Elastic Beanstalk an alternative of Heroku, but cheaper
Elastic Beanstalk was announced as a public beta from 2010; it helps we easier to work with deployment. For detail please go here
Beanstalk is free, the cost you will pay will be for the services you use & number of hours of usage.
I use Elastic Beanstalk for a long time, and I think it can be the replacement of Heroku and cheaper!
Summary
Heroku: Easy at beginning, FREE instance, but expensive later
AWS: Not easy, free hours available, kind of cheaper, Beanstalk should be concerned to use
So in my current system, I use Heroku for staging and Beanstalk for production!
The existing answers are broadly accurate:
Heroku is very easy to use and deploy to, can be easily configured for auto-deployment a repository (eg GitHub), has lots of third party add-ons and charges more per instance.
AWS has a wider range of competitively priced first party services including DNS, load balancing, cheap file storage and has enterprise features like being able to define security policies.
For the tl;dr skip to the end of this post.
AWS ElasticBeanstalk is an attempt to provide a Heroku-like autoscaling and easy deployment platform. As it uses EC2 instances (which it creates automatically) EB servers can do everything any other EC2 instance can do and it's cheap to run.
Deployment with EB is very slow; deploying an update can take 10-15 minutes per server and deploying to a larger cluster can take the best part of an hour - compared to just seconds to deploy an update on Heroku. Deployments on EB are not handled particularly seamlessly either, which may impose constraints on application design.
You can use all the services ElasticBeanstalk uses behind the scenes to build your own bespoke system (with CodeDeploy, Elastic Load Balancer, Auto Scaling Groups - and CodeCommit, CodeBuild and CodePipeline if you want to go all in) but you can definitely spend a good couple of weeks setting it up the the first time as it's fairly convoluted and slightly tricker than just configuring things in EC2.
AWS Lightsail offers a competitively priced hosting option, but doesn't help with deployment or scaling - it's really just a wrapper for their EC2 offering (but costs much more). It lets you automatically run a bash script on initial setup, which is nice touch but it's pricy compared to the cost of just setting up an EC2 instance (which you can also do programmatically).
Some thoughts on comparing (to try and answer the questions, albeit in a roundabout way):
Don't underestimate how much work system administration is, including keeping everything you have installed up to date with security patches (and occasional OS updates).
Don't underestimate how much of a benefit automatic deployment, auto-scaling, and SSL provisioning and configuration are.
Automatic deployment when you update your Git repository is effortless with Heroku. It is near instant, graceful so there are no outages for end users and can be set to update only if the tests / Continuous Integration passes so you don't break your site if you deploy broken code.
You can also use ElasticBeanstalk for automatic deployment, but be prepared to spend a week setting that up the first time - you may have to change how you deploy and build assets (like CSS and JS) to work with how ElasticBeanstalk handles deployments or build logic into your app to handle deployments.
Be aware in estimating costs that for seamless deployment with no outage on EB you need to run multiple instances - EB rolls out updates to each server individually so that your service is not degraded - where as Heroku spins up a new dyno for you and just deprecates the old service until all the requests to it are done being handled (then it deletes it).
Interestingly, the hosting cost of running multiple servers with EB can be cheaper than a single Heroku instance, especially once you include the cost of add-ons.
Some other issues not specifically asked about, but raised by other answers:
Using a different provider for production and development is a bad idea.
I am cringing that people are suggesting this. While ideally code should run just fine on any reasonable platform so it's as portable as possible, versions of software on each host will vary greatly and just because code runs in staging doesn't mean it will run in production (e.g. major Node.js/Ruby/Python/PHP/Perl versions can differ in ways that make code incompatible, often in silent ways that might not be caught even if you have decent test coverage).
What is a good idea is to leverage something like Heroku for prototyping, smaller projects and microsites - so you can build and deploy things quickly without investing a lot of time in configuration and maintenance.
Be sure to factor in the cost of running both production and pre-production instances when making that decision, not forgetting the cost of replicating the entire environment (including third party services such as data stores / add ons, installing and configuring SSL, etc).
If using AWS, be wary of AWS pre-configured instances from vendors like Bitnami - they are a security nightmare. They can expose lots of notoriously vulnerable applications by default without mentioning it in the description.
Consider instead just using a well supported mainstream distribution, such as Ubuntu or Debian (or CentOS if you need RPM support).
Note: Amazon offer have their own distribution called Amazon Linux, which uses RPM, but it's EC2 specific and less well supported by third party/open source software.
You could also setup an EC2 instance on AWS (or Lightsail) and configure with something like flynn or dokku on it - on which you could then deploy multiple sites easily, which can be worth it if you maintain a lot of services or want to be able to spin up new things easily. However getting it set up is not as automagic as just using Heroku and you can end up spending a lot of time configuring and maintaining it (to the point I've found deploying using Amazon clustering and Docker Swarm to be easier than setting them up; YMMV).
I have used AWS EC instances (alone and in clusters), Elastic Beanstalk and Lightsail and Heroku at the same time depending on the needs of the project I'm working on.
I hate spending time configuring services but my Heroku bill would be thousands per year if I used it for everything and AWS works out a fraction of the cost.
tl;dr
If money was never an issue I'd use Heroku for almost everything as it's a huge timesaver - but I'd still want to use AWS for more complicated projects where I need the flexibility and more advanced services that Heroku doesn't offer.
The ideal scenario for me would be if ElasticBeanstalk just worked more like Heroku - i.e. with easier configuration and quicker and a better deployment mechanism.
An example of a service that is almost this is now.sh, which actually uses AWS behind the scenes, but makes deployments and clustering as easy as it is on Heroku (with automatic SSL, DNS, graceful deployments, super-easy cluster setup and management).
I've used it quite lot for both Node.js app and Docker image deployments, the major caveat is the instances are shared (something reflected in their lower cost) and currently no option to buy dedicated instances. However their open source deployment tool 'now' can also be used to deploy to dedicated instances on AWS as well as Google Cloud and Azure.
It's been a significant percentage of our business migrating people from Heroku to AWS. There are advantages to both, but it's gets messy on Heroku after a while... once you need a certain level of complexity no longer easy to maintain with Heroku's limitations.
That said, there are increasingly options to have the ease of Heroku and the flexibility of AWS by being on AWS with great frameworks/tools.
Funny thing is Heroku actually uses AWS on the backend. It takes away all the overhead and does architecture management on EC2 for you. (Got that knowledge from a senior engineer at a Big Company during an Interview)
Sometimes, I wonder why people compare AWS to Heroku. AWS is an IAAS( infrastructure as a service) it clearly speaks how robust and calculative the system is. Heroku, on the other hand, is just a SAAS, it is basically just one fraction of AWS services. So why struggle with setting up AWS when you can ship your first product to the prime using Heroku.
Heroku is free, simple and easy to deploy almost all types of stacks to the web. Heroku is specifically built to bypass all the hassles of shipping your application to a live server in less than no time.
Nevertheless, you may want to deploy your application using any of the tutorials from both parties and compare
AWS DOCS and Heroku Docs
Well Heroku uses AWS in background, it all depends on the type of solution you need. If you are a core linux and devops guy you are not worried about creating vm from scratch like selecting ami choosing palcement options etc, you can go with AWS. If you want to do things on surface level without having those nettigrities you can go with heroku.
Even though both AWS and Heroku are cloud platforms, they are different as AWS is IaaS and Heroku is PaaS
Well! I observer Heroku is famous in budding and newly born developers while AWS has advanced developer persona. DigitalOcean is also a major player in this ground. Cloudways has made it much easy to create Lamp stack in a click on DigitalOcean and AWS. Having all services and packages updates in a click is far better than doing all thing manually.
You can check out completely here: How to Host PHP on Amazon AWS EC2
Amazon Web Services (AWS) offers lots of services from IaaS to PaaS with assured 99.9999999% durability and availability of data and infrastructure. AWS offers infrastructure automation along with several tools for developers to pipeline their application deployment process.
On the other hand, Heroku is just PaaS which offers services to manage your platform on their cloud. It nowhere stands with AWS whether it is infrastructure or security.
Heroku is like subset of AWS. It is just platform as a service, while AWS can be implemented as anything and at any level.
The implementation depends on what the business requirement. If it fits in either, use accordingly.
I've just finished watching both Railscasts' episodes on Elasticsearch. I've also went ahead and implemented it into my rails application (3.1) and everything is working great. How I want to deploy my app to Heroku but I'm unsure how to get Elasticsearch working on Heroku (specifically on a cedar stack).
Any help would be greatly appreciated!
You can very easily [and freely ;-)] roll your own ElasticSearch server on Amazon EC2, and just connect to it with your app. This is what we're doing, and it's working nicely...
http://www.elasticsearch.org/tutorials/elasticsearch-on-ec2/
Heroku now supports ElasticSearch with the Bonsai add on. https://devcenter.heroku.com/articles/bonsai
I created a Play framework module that will run Elastic Search on Heroku using S3 to persist the state. No need for an EC2 instance - you only pay for the cost of S3 data which is much less - mainly IO transactions. It uses the ElasticSearch S3 gateway (persistence mechanism).
You can use it either by extending the Play application to create specific endpoints for your search functions, or if you like, you can access ElasticSearch REST API directly (by default it exposes it on the route http://yourapp.com/es). There is a very basic authentication system to secure it.
The only downside to this setup is that the dyno can take some time to spin up. So, it won't work well if you let the dyno spin down from inactivity - and you may get nailed for S3 data transfer charges if that happens a lot and your index is huge. The upside is you control your own data and it is cheap cheap cheap. Another word of warning - you will need to be careful to keep inside the memory limits of a Heroku dyno. That said, we had full text search autocomplete functions working on several indexes with no problems.
You might be able to build a similar module in Rails using JRuby to talk to the ElasticSearch Java API. My main contribution here was figuring out how to run it inside another web framework - since Play also uses Netty it was pretty easy to embed it. Performance tests compared to an EC2 cluster + Tire (Rails gem for ElasticSearch) showed that the Heroku/Play approach performed faster searches.
The project is here: https://github.com/carchrae/elastic-play - I'd be happy to help people set it up - it should be pretty painless.
That was exactly my first thought when I watched the RailsCast but unfortunately it's a java daemon that it runs as which isn't possible on Heroku.
Anyway you can't run it on a normal Heroku dyno since it would have to save data to disk which is not persisted on Heroku. You need to wait for an Add-on or host it somewhere else.
I'm a web developer just now getting interested in sysadmin stuff. I've set up a server before on Linode.com (Ubuntu 10.04 LTS, nginx, Ruby on Rails, PostgreSQL), but there were some issues. Everything was on one machine, so whenever something went wrong with Linode or I got a lot of traffic, my site would go down.
Now I'm interested in setting up a personal blog, and deploying it across Amazon AWS. This is a good opportunity for me to learn to how to use multiple servers with load balancing, auto-scaling, failover, etc. The only problem is I'm not quite sure where to start.
I've read a litany of documentation from Amazon and blog posts elsewhere, but as a sysadmin newbie I have a few questions:
I get that EC2 instances are too volatile to store data on. So where should I store it? Amazon Elastic Block Store? Will the entire filesystem go there, as well as the database?
Do I need serious knowledge of load balancing and scaling? Or will the Amazon Elastic Load Balancer handle make things simple for me? How does their load balancer interact with nginx?
How much of this do you recommend doing through the AWS interface as opposed to through the command line?
Any non-obvious snags that might catch me?
Are there any tutorials for deploying a blog or simple Rails app on EC2? I don't need a production-quality setup here; my main goal is to learn.
Thanks for any answers you can provide!
I've set up my fair share of AWS deployments; here's basics:
Data store
If you have frequently accessed data, as you likely know, it is best to use a database. This is one of the hairier parts of AWS hosting. Your options are, roughly in increasing order of complexity/cost:
SimpleDB - Amazon's own database offering. They give you an HTTP api, which you use to read and write your data. There are some rails libraries for it, but on the whole, it isn't a graceful drop-in for rails.
Amazon RDS - Amazon will preconfigure a mysql-like database server for you. This requires you to boot up an DB server instance, so the pricing server isn't favorable for tiny sites. On the plus side, it allows you to scale your DB server more easily.
Roll your own - Plan around Amazon EC2 instances vanishing at any point; therefore, the local storage you get with EC2 instances can best be considered a big temp directory. Elastic Block Store is Amazon's solution to this; it effectively is a disk image your instances mount. EBS images live independently of EC2 instances, so if your server goes down, you can mount the EBS image on a new EC2 instance. You can essentially roll your own database cluster by booting a bunch of instances and configuring them to replicate off eachother. This works, but is not graceful, and should really only be attempted if you cannot solve your problem with less exotic methods.
Amazon pretty much enumerates these options, plus a few more which are not applicable to you at http://aws.amazon.com/running_databases/
Infrequently changed data should be stored in S3; there's plenty of ruby gems for accessing this easily. If your website is entirely static on the server side, you can even run your entire site off S3
Load Balancing
Amazon "Elastic Load Balancing" is quite effective at the typical web load balancing requirements. It is usually a no-brainer choice, unless you have exotic requirements. It will not scale your cluster for you, however. For auto-booting and shutting down of instances, you should look to Amazon's own auto-scaling solution
Caveats
Be sure to note which "Availability Zone" (aka datacenter) you're in. In some cases, you cannot share AWS resources across availability zones.
Tutorials
There are plenty of tutorials, but in my brief search, none that I found to be really great or up to date. However, check out https://github.com/wr0ngway/rubber , which is a ruby tool for deploying apps to EC2. It will get you most of the way there.