Reload a tab after dismissing a view - ios

There are two views in a tabbarviewcontroller. And the first tab has its view controller called myViewController which contain its IBOutlet. Pressing the button on the first view will present a view controller. After dismissing the view and back to the tab, the viewWillAppear of myViewController won't be called,but viewWillAppear of tabbarviewcontroller will. I need to reload the information on the first tab. If I use viewWillAppear in tabbarviewcontraller, how do I change the values of these property in myViewController? If anyone has idea ? Thanks.

If you want to call viewWillAppear of the viewController, you can add this to viewWillAppear of the TabBar
for (UIViewController *viewController in tabBarController.viewControllers)
{
[viewController viewWillAppear:YES]
}

Related

popViewController not working with storyboards

I create a UINavigationController (as a initial screen) and connect them with my UITableViewController (as a root).
Next, I create another UINavigationController and connect with my UIViewController. Inside my UITableViewController I connect my first cell with UINavigationController (That was connected with my UIViewController) (Segue -> show).
When I run the project my table appears, when I select my first row, my UIViewController appears. Thats great!
When I was in my UIViewController the back bar button doesn't appears, in my case I create a left bar button, that will run a function to dismiss that view and go back to my UITableViewController, for that I use many codes:
-(void)back{
NSLog(#"Called");
[self.parentViewController.navigationController popViewControllerAnimated:YES];
}
-(void)back{
NSLog(#"Called");
[self.navigationController popViewControllerAnimated:YES];
}
-(void)back{
NSLog(#"Called");
[self.navigationController popViewControllerAnimated:YES];
}
But all of they doesn't works and my view don't dismiss, how can I solve this problem?
The problem is that your navigation controller, that you call from your table view cell, has only a single view controller (yours) on its navigation stack. So it cannot pop anything from this stack, else the stack were empty.
What you have to do instead is to dismiss the navigation controller itself.
I think that the solution would be to remove the second navigation controller. Since the TableView is already embedded inside a Navigation Controller, the show segue to the UIViewController must be directly connected to it.

Navigation Controller between view controller and table view controller

Any ideas on how to add a Navigation Controller in iOS7 between a Table View and View Controller?
As soon as I embed the Navigation Controller to the table view the app crashes.
Without the Navigation Controller it works fine. But then the Table View becomes a View Controller. This is the code I'm using:
[self.navigationController performSegueWithIdentifier:#"setup" sender:self];
Here is my storyboard: http://sv.tinypic.com/r/1ztdnb/8
Okay, giving the comments here is what I think you want:
A LoginViewController which is a subclass of a UITableViewController. Should not display navigationBar.
A ProfileViewController also a subclass of a UITableViewController. Should display a navigationBar.
When a user taps LogIn button, ProfileViewController should be "pushed".
So the whole trick is to make navigation bar hidden for one view controller and visible for another. Well this is very easy to achieve - just use setNavigationBarHidden:animated: in viewWillAppear: for each view controller
- (void)viewWillAppear:(BOOL)animated
{
[super viewWillAppear:animated];
[self.navigationController setNavigationBarHidden:YES/NO animated:animated];
}

Programmatically dismiss popover from view embedded in navigation controller

I have a view controller. When I press a button in it, a popover controller with a uitableview shows up. I select a row, which shows another view with some controls in it. When I press a button that says "Save Item", I want it to dismiss the popover. How do I do this?
Here's what I've tried:
Using the delegate and protocol pattern. This hasn't worked since in order to push another view inside my tableview, the whole thing must be embedded in a navigation view controller, so when I segue, it segues to a nav controller, not the tableview which I could set the popover delegate for.
Adding my main view as a member of the view I want to dismiss from. I don't know why this doesn't work.
The Hard Clean Way
There are four view controllers in the story, plus a popover controller. I will call the three view controllers "main view controller", "nav", "vcA", and "vcB". As I understand it, "nav" is the initial content view controller of the popover and has "vcA" as its root view controller.
main view controller -> popover controller -> nav -> vcA -> (later) vcB
When you present the popover from your main view controller, you keep a reference to the popover controller. This is what makes dismissing possible, as you know.
When you create the Save button, you make its target the main view controller and its action a method in the main view controller. You will have to set this up in code; it cannot be configured from a storyboard because you cannot form an action from one scene to another. (You are able to do this because you started out with a reference to nav and vcA when you configured the popover controller initially. Thus you can hand vcA a reference to self, the main view controller. If necessary, you can then pass this reference down the chain from vcA to vcB as vcB is summoned and pushed onto the navigation stack.)
Now the user taps Save, your main view controller's method runs, and it uses its reference to the popover controller to tell it to dismiss.
The Easy Dirty Way
The heck with all that. The main view controller registers for an NSNotification. The Save button posts that NSNotification. Done. :)
The Middle Way
You could set the whole chain up in your storyboard using a popover segue, and do the dismissal through an Unwind segue matched by an unwind method back in the main view controller. I never think of this initially, because I don't like popover segues very much. But it does work.
This is how I solved my problem (sorry for the bad english):
First, Create a property of UIStoryboardPopoverSegue in the VcA and set it from the main view controller.
Nav -> VcA_ViewController
#property (strong, nonatomic) UIStoryboardPopoverSegue *popupSegue;
Then, in the Main View Controller prepareForSegue set the property:
- (void) prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender{
if([segue.identifier isEqualToString:#"your segue from the mainview to the navigation"]) {
UINavigationController *navigationController = (UINavigationController *)c;
VcA_ViewController *vcA = (VRPointOfInterestsFiltersViewController *) navigationController.topViewController;
vcA.popupSegue = (UIStoryboardPopoverSegue*)segue;
} }
Now, from the VcA controller you can have the dismiss button
- (IBAction)dismissPopoup:(id)sender {
[self.popupSegue.popoverController dismissPopoverAnimated:YES]; }
Don't forget to link the popOverSegue from the MainViewController to the NavController.
Hope it helps!

Back to RootViewController from Modal View Controller

From Home view - my RootViewController - I open up 2 ViewControllers one after another as user progresses in navigation hierarchy like so:
1) SecondViewController is pushed by button connected in my Storyboard
2) ThirdViewController is presented modally
[self performSegueWithIdentifier:#"NextViewController" sender:nil];
So, the picture is: RootViewController -> SecondViewController -> ThirdViewController
Now in my ThirdViewController I want to have a button to go back 2 times to my RootViewController, i.e. go home. But this does not work:
[self.navigationController popToRootViewControllerAnimated:YES];
Only this guy goes back once to SecondViewController
[self.navigationController popViewControllerAnimated:YES];
How can I remove both modal and pushed view controllers at the same time?
I had a similar situation, where I had a number of view controllers pushed onto the navigation controller stack, and then the last view was presented modally. On the modal screen, I have a Cancel button that goes back to the root view controller.
In the modal view controller, I have an action that is triggered when the Cancel button is tapped:
- (IBAction)cancel:(id)sender
{
[self.delegate modalViewControllerDidCancel];
}
In the header of this modal view controller, I declare a protocol:
#protocol ModalViewControllerDelegate
- (void)modalViewControllerDidCancel;
#end
And then the last view controller in the navigation stack (the one that presented the modal view) should implement the ModalViewControllerDelegate protocol:
- (void)modalViewControllerDidCancel
{
[self dismissViewControllerAnimated:NO completion:nil];
[self.navigationController popToRootViewControllerAnimated:YES];
}
This method above is the important part. It gets the presenting view controller to dismiss the modal view, and then it pops back to the root view controller. Note that I pass NO to dismissViewControllerAnimated: and YES to popToRootViewControllerAnimated: to get a smoother animation from modal view to root view.
I had the same requirement but was using custom segues between the view controllers. I came across with the concept of "Unwind Segue" which I think came with iOS6. If you are targeting iOS6 and above these links might help:
What are Unwind segues for and how do you use them?
http://chrisrisner.com/Unwinding-with-iOS-and-Storyboards
Thanks.
Assuming your AppDelegate is called AppDelegate, then you can do the following which will reset the rootviewcontroller for the app window as the view RootViewController
AppDelegate *appDel = (AppDelegate*)[[UIApplication sharedApplication] delegate];
RootViewController *rootView = [[RootViewController alloc] init];
[appDel.window setRootViewController:rootView];

ViewDidAppear not called in main view when modal view is presented over a popover

I'm trying to use a popover as an intermediary menu between my main view and a modal view controller. I can successfully present the Modal view controller from the popover by using the following code:
UIStoryboard *storyboardiPad = [UIStoryboard storyboardWithName:#"MainStoryboard_iPad" bundle:nil];
cbwEditControlPanel *editCP = [storyboardiPad instantiateViewControllerWithIdentifier:#"EditCP"];
UINavigationController *nav = [[UINavigationController alloc] initWithRootViewController:editCP];
[nav setToolbarHidden:NO];
[nav setModalPresentationStyle:UIModalPresentationFullScreen];
[nav setModalTransitionStyle:UIModalTransitionStyleCoverVertical];
[self presentViewController:nav animated:YES completion:nil];
self.modalInPopover = NO;
The problem I'm running into is that when the EditCP modal view controller is dismissed, the main view controller never updates. I have a pagecontroller on the main view that should be updated to reflect the number of pages as set in the EditCP modal view controller, but for some reason the modal view controller being called from the popover prevents the main view controller from updating the pagecontroller. I've even tried calling the main view's "View Will Appear" method from the popover or modal view when they are dismissed, but even if the 'viewWillAppear' method is called the pageController will not update!
Any ideas what is preventing the pageController from updating? I even passed a reference to the pagecontroller to the modal view and tried to update it there, but it seems that from the time the popover is presented until it is dismissed, I cannot update the number of pages on the PageController.
Thank you!
So this is an old question but I also came across a similar problem recently when using a popover. My solution was to use an unwind segue to trigger my parent view to perform some action. In my case my parent view contains contact information and the popover contains a list of cites. All I wanted to do was to have the parent view update with the new city once the user selected it from the popover. So in my parent view I create my unwind function as follows:
In the .h:
- (IBAction)unwindToContactTVC:(UIStoryboardSegue *)unwindSegue;
In the .m:
- (IBAction)unwindToContactTVC:(UIStoryboardSegue *)unwindSegue
{
[self updateTableForOffice];
}
In the above .m file is where you would have the logic to do whatever it is you want to in the parent view. To connect this unwind segue go to the child view in the storyboard and control drag from the view icon to the exit icon. You should see a pop up with the name of your unwind segue.
Finally, give that unwind segue a name and then in the child controller in the viewWillDisappear() function call the segue as follows:
- (void)viewWillDisappear:(BOOL)animated
{
[self performSegueWithIdentifier:#"unwind-to-contact-tvc" sender:self];
}
I hope that helps. If someone has a better solution let me know.
Well, I half solved the problem. The only way to get an update function when the popover disappeared was to stop using Storyboards and programmatically present the popover, using the main view as the delegate. I then was able to update correctly inside the popoverControllerDidDismissPopover method.
However, I am still interested in finding a way to update the pageControl when the modal is dismissed, before the popover is dismissed.

Resources