I'm working on a big problem: I have to create a perfect colored JPEG from a PDF file. But there still small differences in green or blue color. I'm using Ghostscript version 8.71 on a Debian system.
Original PDF file:
http://content.test.de/configurations/82/e2/82e2897f5448e73769655317e8fdee77/output.pdf
The simple way via
convert output.pdf -density 600 -quality 100 output.jpg
Result:
http://content.test.de/configurations/82/e2/82e2897f5448e73769655317e8fdee77/output-0.jpg
creates a very light green having nothing to do with the color in the PDF.
After that I tried two other ways with better results, but not perfect:
Via ImageMagick:
convert output.pdf -profile sRGB_v4_ICC_preference.icc \
-density 600 -quality 100 test.jpg
convert -profile ISOcoated_v2_eci.icc -profile eciRGB_v2.icc \
-quality 100 test-1.jpg finish-1.png
Result: Links like before with filename "finish-0.png" (I can just write two links).
Via Ghostscript:
gs -dNOPAUSE -sDEVICE=jpegcmyk -dFirstPage=1 -dLastPage=237 \
-sOutputFile=image%d.jpg -dJPEGQ=95 -dUseCIEColor -g850x610 \
-dPDFFitPage -r300 -q output.pdf -c quit
Result: Links like before with filename "image1.jpg" (I can just write two links).
Anybody has an idea to get a perfect result?
First, use a recent version of Ghostscript, 8.71 is 3 years old. Versions prior to 9.0 will use standard PostScript colour conversions, 9.0 onwards use Little CMS. Your PDF file uses ICC profile based colour spaces with 3 components (RGB), PostScritp RGB->CMYK is fast but inaccurate, so best not to do that.
I believe that if you use a decently up to date version you will find the results adequate without any further tweaking. Do NOT use -dUseCIEColor! That's a horrible PostScript kludge.
It also looks like the jpegcmyk device isn't doing proper colour management, is there a reason you can't use the jpeg device ?
Related
I am trying to convert a tiff CMYK image to PNG and cannot find out the ICC profile, which leads to wrong colors in the converted PNG.
I tried the following to determine the profile:
$ identify -format "%[profile:icc]" test.tif
With no result.
And, the following, with no usable result:
$ identify -verbose test.tiff |grep -i profile
crs:CameraProfile: Adobe Standard
crs:CameraProfileDigest: 3DA8CE4A626CE36A1D0C55BF157793C9
crs:LensProfileEnable: 0
crs:LensProfileSetup: LensDefaults
Profiles:
Profile-8bim: 8730 bytes
Profile-tiff:37724: 3132408 bytes
Profile-xmp: 30533 bytes
After that I downloaded Adobe's profiles and tried each of them, but not a single one did work. This is how I tried to apply the profiles:
convert -profile CMYKProfiles.icc -profile AppleRGB.icc -colorspace rgb test.tif test.png
That works, but only if I know the profile and supply the right profile. In my case that doesn't work.
Is the image just broken or is there a way to convert it preserving its colors?
Your file has 4 layers or pages. The one you want seems to be the first layer/page. Each is CMYK with no color profile. Without profiles, it is possible that each display device might show the image differently depending upon what default profile is used, if any.
But with Imagemagick, I get pretty close using USWebCoatedSwop.icc and sRGB.icc profiles as follows
convert -quiet test.tif[0] -profile /Users/fred/images/profiles/USWebCoatedSwop.icc -profile /Users/fred/images/profiles/sRGB.icc test.png
test.png
I'm converting about 9000 photos from .NEF to .jpg.
I'd like to retain all EXIF data, most importantly Date and time created, Latidude and Longitude.
I'd like the JPGs to be at the highest possible quality.
I've just gotten started using ImageMagick from the command line. I also have Exiftool installed. I'm using the mogrify command because it handles batches nicely.
When I run
mogrify -format jpg *.NEF
All of my .NEF files are successfully converted to JPGs, but all EXIF data are lost.
I've searched around quite a bit to try and find a solution to this and it seems like I may have to install ufraw, but if possible I'd like a solution that uses software I already have - ImageMagick and Exiftool.
Thanks in advance for any advice you have about how to do this.
Update:
The images I converted using mogrify are slightly smaller (~ 1-2 MB) than those output by my colleague using picasa to convert NEF to JPG. But when I specify -quality 100 in ImageMagick the image sizes gain about 45 MB! Why?
The code exiftool -tagsfromfile %d%f.NEF -ext jpg -overwrite_original . adds the exif information to the JPGs.
Think twice before doing this - you really are discarding a lot of information - and if you don't want it, why not shoot JPEG instead of RAW in the first place?
FWIW, you can use ImageMagick to get the JPEG:
convert somefile.NEF somefile.jpg
Then you can copy the tags across from the original to the file newly created by ImageMagick:
exiftool -tagsfromfile somefile.NEF -all:all somefile.jpg
If you have thousands of images, and are on macOS or a decent Linux/Unix-based OS, I would recommend GNU Parallel like this and it will keep busy all those lovely cores that you paid Intel so dearly for:
parallel --dry-run 'convert {} {.}.jpg; exiftool -tagsfromfile {} -all:all {.}.jpg' ::: *nef
Sample Output
convert a.nef a.jpg; exiftool -tagsfromfile a.nef -all:all a.jpg
convert b.nef b.jpg; exiftool -tagsfromfile b.nef -all:all b.jpg
and if that looks good remove the --dry-run so it actually runs the command.
If you are on Windows, you will have to do some ad-hoc jiggery-pokery to get it done in any reasonable time frame. You can use the mogrify command and get all the conversions done to JPEG and then do all the exiftool re-embedding of the EXIF data later. If your files are named with some sort of system with incrementing numbers, you can start two or three copies of mogrify in parallel - say one doing files whose names end in [0-4] and another one doing files whose names end in [5-9]. I don't speak Windows, but that would probably look like these two commands each running in its own Command Prompt:
mogrify -format jpg *0.NEF *1.NEF *2.NEF *3.NEF *4.NEF
mogrify -format jpg *5.NEF *6.NEF *7.NEF *8.NEF *9.NEF
Then you would do the exiftool stuff when they had all finished but you would have to use a FOR loop like this:
FOR %%G IN (*.NEF) DO (
exiftool -tagsfromfile %%G -all:all %%~dpnG.jpg
)
The %%~dpnG part is a guess based on this answer.
Based on this question for imagemagick, what is the equivalent for graphicsmagick? Recipe for creating Windows ICO files with ImageMagick?
Also I just want to generate a fully transparent ico file with multiple sizes. I found that there's an xc:none option that works for both, but is there one single command that generates ico files with multiple sizes that is transparent? Otherwise I would have to first create a transparent png file, then create ico files from the png file.
AFAIK, GraphicsMagick doesn't support writing ICO format files - see here.
Just in case anyone knows more about this mad Microsoft format and if it is maybe some sort of multi-page TIF or GIF in disguise that just needs to be renamed, the following would be one way of making a recipe in GraphicsMagick:
#!/bin/bash
{ echo convert image.png mpr:initial;
echo convert mpr:initial -resize 16x16 mpr:16;
echo convert mpr:initial -resize 32x32 mpr:32;
echo convert mpr:initial -resize 48x48 mpr:48;
echo convert mpr:initial -resize 64x64 mpr:64;
echo convert mpr:16 mpr:32 mpr:48 mpr:64 -colors 256 favicon.tif; } | gm batch -prompt off
For the moment, I have created a multi-page TIF as the output file and it contains the four sizes you need - but as I said, GraphicsMagick will not write a ICO file.
I am trying to convert multiple .eps files into .jpg ones. By looking at answers here in SO, I was able to do it for single separate files.
The problem is that, when I'm trying to do it for all the files, they don't show any .jpg file.
I am currently using Imagemagick with the command
convert -density 300 outputs-000.eps -flatten outputs-000.jpg
I believe the problem is because my files are written as
outputs-000.eps
outputs-001.eps
outputs-002.eps
outputs-003.eps
...
outputs-145.eps
...
and so on. I tried putting %d (as in outputs-%d.eps and outputs-%d.jpg), but with no success.
Apart from that, I intent to get all those files and "convert" them into an .mkv or .gif or similar type (they are images of the time configuration of a particle collision system, so each image is a frame, so the goal is to make it into a 10sec movie). If there is a way to do that directly from the .eps, even better. Any help is welcome, since I've been trying to do this for several hours now. Thank you.
You should be able to make an animated GIF in one go like this:
convert -density 300 outputs-*eps -delay 200 animated.gif
Failing that, you should be able to convert all your eps files to, say PNG with:
mogrify -density 300 -format png outputs-*eps
Be careful with mogrify - it overwrites your input files unless you specify -path for an output directory, or you change format - like I just did to PNG.
For anyone who lands here trying to figure out how to work around ImageMagic's convert: not authorized without reverting the change that was made to the system-wide security policy to close a vulnerability, here's how you'd use Ghostscript to do a batch EPS-to-JPEG conversion directly without bringing ImageMagick into the mix:
gs -dSAFER -dEPSCrop -r300 -sDEVICE=jpeg -o outputs-%03d.jpg outputs-*.eps
-dSAFER puts Ghostscript in a sandboxed mode where Postscript code can only interact with the files you specified on the command line. (Yes, the parts of EPS, PS, and PDF files that define the page contents are in a turing-complete programming language.)
-dEPSCrop asks for the rendered output to be cropped to the bounding box of the drawing rather than padded out to whatever size page Ghostscript expects you to be printing to. (See the manual for details.)
The -r300 requests 300 DPI (-r600 for 600 DPI, etc.)
The -sDEVICE specifies the output format (See the Devices section of the manual for other choices.)
-o is a shorthand for -dBATCH -dNOPAUSE -sOutputFile=
This section of the Ghostscript manual gives some example formats for for multi-file filename output but, for the actual syntax definition, it points you at the documentation for the C printf(3) function.
Once you've got your JPEGs, you can follow the instructions in this answer over on the Video Production Stack Exchange to combine them into an MKV file.
The TL;DR is this command here:
ffmpeg -framerate 30 -i outputs-%03d.jpg -codec copy output.mkv
Check out the other answers if you want something that performs inter-frame compression rather than aiming to avoid transcoding the JPEGs again.
(If you want the best compromise, have Ghostscript output PNGs and then let ffmpeg handle switching to lossy compression.)
I am using the ImageMagick convert utility right now. I have a PostScript file that takes about 90 seconds to convert to GIF.
I am looking for a faster way to do this perferably by modifying the options to "convert".
When I say "fast", ideally a few seconds but I'll take any significant speed up. Something suitable for an interactive GUI.
I only need this in black and white or greyscale (specifically it is is an image of seismic data "wiggle traces" so B&W is fine.)
Other acceptable formats are BMP, GIF, JPEG, JPG, PCX, PGM, PNG, PNM, PPM, RAS, TGA, TIF, or TIFF.
Trying to stick with ImageMagick as that is already installed and trying to avoid selling my boss on anything new. Still happy to hear other suggestions.
My suggestion is: Use Ghostscript.
Since you have a working ImageMagick already installed, that means Ghostscript is also there: because ImageMagick cannot convert PDF or PostScript to raster images all by its own -- it has to call Ghostscript as its delegate to do this anyway.
Ghostscript can directly convert PDF/PostScript input to TIFF/TIF/TIFFg4, JPEG, PBM, PCX, PNG, PNM, PPM, BMP raster image output.
The advantages are: you don't need to have ImageMagick involved. So it's faster and also gives you more direct control over the conversion parameters. If you run Ghostscript via ImageMagick that's a level of indirection which isn't always required. (Sometimes it may be required to add some fine-tuning and post-processing manipulations to the raster image data that Ghostscript generated -- but that doesn't seem to be the case for you.)
The only disadvantage is: Ghostscript cannot produce GIF. If you required GIF (which you don't seem to), you need ImageMagick for post-processing the raster output of Ghostscript to GIF.
You can see how ImageMagick calls Ghostscript (and which parameters it uses for the call -- look for a printed line on stderr containing gs, gsx or gswin32c or gswin64c) by running for example:
convert -verbose some.pdf[0] some.gif
Update
I did run a very, very un-scientific 'benchmark', running the following two commands 100 time each, which convert the randomly picked page 333 of the official PDF specification (ISO version for PDF-1.7) to GIF, measuring the time consumed. I run these commands in concurrently parallel, so both should have had to deal with the same overall system load, making the results better comparable:
'Comfortably' using ImageMagick's convert to directly produce GIF:
time for i in $(seq -w 1 100); do
convert \
PDF32000_2008.pdf[333] \
p333-im-no_${i}.gif ;
done
Using Ghostscript to create from the same page grayscale PNGs, piping Ghostscript's output to ImageMagick's convert in order to get GIFs:
time for i in $(seq -w 1 100); do
gs \
-q \
-o - \
-dFirstPage=333 \
-dLastPage=333 \
-sDEVICE=pnggray \
PDF32000_2008.pdf \
| \
convert \
- \
p333-gs-no_${i}.gif ;
done
Timing esults for the first command (running the 'comfortable' convert to achieve the PDF->GIF transformation, which uses Ghostscript only 'behind our backs'):
real 2m29.282s
user 2m22.526s
sys 0m5.647s
Timing results for the second command (running gs directly + openly, piping it's output to convert:
real 1m27.370s
user 1m23.447s
sys 0m3.435s
One more thing:
The total size of the 100 'Ghostscript'-GIFs was 1,6 MByte -- but they were 8-bit grayscale.
The total size of the 100 'ImageMagic-direct'-GIFs was 1,2 MByte -- but they were 2-bit black+white.
I don't have the motivation currently to tweak the test commandline parameters more for even closer comparability of the resulting files.
This result (149 seconds vs. 87 seconds) gives me enough confidence into my guess that you can gain significant performance improvements when you follow my recommendation. :-)
I am using the ImageMagick convert utility right now. I have a
PostScript file that takes about 90 seconds to convert to GIF.
I am looking for a faster way to do this perferably by modifying the
options to "convert".
When I say "fast", ideally a few seconds but I'll take any significant
speed up. Something suitable for an interactive GUI.
I only need this in black and white or greyscale (specifically it is
is an image of seismic data "wiggle traces" so B&W is fine.)
You can start with GhostScript:
gs -dSAFER -dBATCH -dNOPAUSE \
-sDEVICE=pnggray -r300 -sOutputFile=seismic.png seismic.pdf
A very longer but interesting way would be to analyze exactly what is in those PDFs.
I had to do something similar with the PDF output of an EKG workflow. The original data were unavailable, we only had the PDF, but I discovered that the PDF was vector based and not raster. After a little hacking it was very easy to decode the labels, the legend and the single elementary lines making up the EKG diagram, and I came up with an option to recolor the tracks starting from what appeared a grayscale image. It did take several days, though.
It is possible that your PDF is generated in a similar way, and the data could be decoded (at first I had to use pdftk to get me a non-compressed PDF, then I found a library that I could use - it implemented the Deflate algorithm). It would be really cool to have output in SVG format :-)