I have a NSFetchedResultsController tied to my main managed object context. It is in charge of keeping data for a table view in my main view.
I have an NSOperation running on a background thread that refreshes/deletes the managed objects that the fetched results controller is keeping track of. I create a child context (private concurrency type / parent = main managed object context) in the nsoperation and insert/delete objects. When it is finished, it saves its context, as well as the parent context.
What's interesting and very frustrating is that this works fine in iOS 6. When I insert or delete objects, my fetched results controller is notified of the changes and everything works as expected. However, on iOS 5, everything works except for deletes. The fetched results controller is not notified of a delete. However... if I manually refresh the fetched results controller (making it nil and refetching the same predicate) then it will show the expected result.
Also, when I register for change/save notifications on the main context, I can see that the user info dictionary contains the objects that I've deleted... even in iOS 5!
One issue that I thought it may be, but I don't think holds because I've removed the factors, is that this object is in a many to one relationship with another object. The object I am deleting/inserting is an "employee" and it has a relationship with a "department". The employee is set to nullify and the department is set to cascade.
As I said, this works fine in iOS6 but not in iOS5.
Any tips would be very helpful.
This bug is due to saving to the persistent store. This child context saves itself, then calls perform block on it's parent, the main managed object context. When the main managed object context saves, it triggers a background context to write to the persistent store. When I removed the background context save, the fetched results controller updated as expected.
Something interesting that I found that was probably causing this was that the managed object was leaking every time I tried saving to the store. Not exactly sure how to fix this yet, but it's good to know the reason for it.
Related
I am making a NSFetchRequest for a NSManaged Object on my initial screen. I sometimes have a crash in a scenario when I :
switch to another view controller within my tab bar controller
make another fetch request with the same managed object type
delete a common managed objects which also appears in my initial VC's fetchrequest. The VC contains a table view.
save the managed context
toggle to the first VC, and reload the data
I am not using NSFetchResutltsController to manage these returned objects. The crash happens when my tableview reloads. I do make another request, and expected the deleted objects not be returned, but it does. When my cells are trying to read a property of the deleted object, it reads uninitialized and crashes. This happens about 1 out of 5 times when toggling between the 2 VCs. I am using performAndWait in all of my CoreData functions.
Is there a way to decouple the the relationship of the Managed Objects between the two screens? If not, how can I get my fetch request in the first VC, not return the objects that were deleted in the second VC, keeping them in sync?
A NSManagedObject is not like other other objects. It does not contain any information itself. It has a pointer to its context and an objectID. When you access it's properties it forwards the request to the context to get the information that it needs. So when an entity is deleted from the context the managedObject stops working and causes a crash. This is why in general I think it is a bad practice to EVER keep a pointer to a managedObject and ALWAYS access them using a fetchedResultsController even if only for one object, and only do a fetch if the managedObjects results are discards right afterwards.
There are two possible solutions, which you hinted to in your question. Either you can copy the values out of the managedObject, or you can use a fetchedResultsController. If you copy the values then it will appears as normal even after the entity is deleted. If you use a fetchedResultsController then the fetchedObjects property will be never contain deleted object, and the object will be inaccessible after it is deleted.
I would recommend using a fetchedResultsController. You don't need to be afraid of it. It is not a large overhead and it reasonable to use even if you are fetching only one object.
I have an iOS app with master and detail layout.
In master, I managed my own NSManagedObjectContext, and also detail is, by this way:
NSPersistentStoreCoordinator *psc = ((AppDelegate *)UIApplication.sharedApplication.delegate).persistentStoreCoordinator;
_context = [[NSManagedObjectContext alloc] initWithConcurrencyType:NSMainQueueConcurrencyType];
[_context setPersistentStoreCoordinator:psc];
In master, I display list that can be clicked by user to show the detail in detail layout.
Upon filling the detail by user, user can save the detail by clicking on button there.
However, I am trying to understand this:
Since there is a save button in detail, the save method will save the detail with detail's context and call the load list in master
Load list will remove all the NSMutableArray of the list [_activities removeAllObjects]; and re-fetch the data from Core Data and reload the tableview
Done that but the the re-fetch function seems to use old data and not the latest.
Why does re-fetch the data doesn't work if I use same context?
You are using outdated APIs to create your managed object contexts. After creating a context, instead of assigning the persistent store, you should set the parentContext.
If you display a "list", you should be using a context that is of type NSMainQueueConcurrencyType. The best way is a NSFetchedResultsController which will also help you manage memory and performance, and greatly simplify the updates you need for your UI. (You would avoid the verbosity and complexity of merging the data "manually" via NSManagedObjectContextDidSaveNotification.)
NB: Resetting the context is a crude and inefficient method for the task you are trying to accomplish. Due to the fact that it affects the entire context, it could change the behavior in other parts of your app.
You have two contexts going on here which is why the data is not being refreshed. If you call [context reset] then you will find that the data will refresh.
Explanation:
An NSManagedObjedctContext is a "scratchpad" which manages the Objective-C representation of SQLite (or XML) data in memory. When you fetch data the context retains the managed objects that are created by the fetch. If you then fetch from another context that context reads the data from the persistent store and creates new managed objects based on what it finds.
ALSO: When you perform a fetch the context checks to see if a managed object representation is ALREADY in existence and then returns it if it is. This means that two contexts can get out of sync quite quickly.
There are several ways around this:
1) Calling reset on a context returns it to it's "baseState" which means all the managed objects are "forgotten" or released by the context. Therefore, another fetch will force the context to read the data directly from the store.
2) Implementing the NSManagedObjectContextDidSaveNotification (see here) will allow you to incorporate changes between contexts.
I have found this article very useful in the past.
I'm trying to implement some basic UIManagedDocument import/export functionality into my app, mainly for dev so that I can easily inspect the document contents and more crucially preserve a set of test data when I start trying to iterate on my CoreData models.
All I am trying to do is load some JSON data from a local file and inject it into my apps UIManagedDocument. The UIManagedDocument's ManagedObjectContext contents are visualised in my app using some Core Data Table View Controllers from the Stanford iOS courses.
I thought I'd try to write this with some threading to keep the UI responsive and to learn how to do it. So I've done something like this
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_BACKGROUND, 0), ^{
// read JSON data file
// parse JSON into dictionaries etc
// iterate over dictionaries
// try to create a new core data entity with my document's ManagedObjectContext
} );
At first I thought this was working. No errors, asserts, crashes triggered and upon looking at my CoreData TableViews I could see the newly added objects in my UI. Unfortunately the newly added objects were seemingly never saved back to the store. I even hooked up to listen to the NSManagedObjectContextDidSaveNotification from my UIDocument's managedObjectContext and saw it wasn't triggering on pressing the home button, like it usually does if it has some changes performed in the app with my UI pending. Infact even doing these operations in the UI wouldn't cause the notification and saving to occur so it was clearly not happy.
I unrolled the code from within the background queue and ran it on the main thread synchronously and everything worked ok, the new data was saved correctly.
I started reading about the complexities of threading and coredata, the documentation seemed to suggest using the UIDocument's ManagedObjectContext's parent ManagedObjectContext to perform operations on in the background so I tried doing the same code again using this parent context, so as follows
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_BACKGROUND, 0), ^{
// read JSON data file
// parse JSON into dictionaries etc
// iterate over dictionaries
// try to create a new core data entity with my document's ManagedObjectContext parent ManagedObjectContext
} );
This time for some reason the CoreData TableView controllers no longer updated to show the newly injected objects. Even after explicitly calling save on the parent context, nothing appeared. However on quitting the app and reloading the app the newly injected objects did seem to be added correctly. Interestingly at this point i'd left a fetchrequest with a cachename specified and that threw up an error on this first run of the app after injecting the objects this way. I guess somehow the way the object had come from the parent context directly perhaps invalidated the cache somehow, that's still something I don't fully understand. Even changing the cache to nil didn't fix the issue of the table views not updated the same session as when the objects were injected into the parent context.
Looking elsewhere I've seen some uses of the managedObjectContext performBlock suggested. Another case where someone has said you must call
[document updateChangeCount:UIDocumentChangeDone]
after all changes to ensure the saving is performed, or perhaps using
- (void)autosaveWithCompletionHandler:(void (^)(BOOL success))completionHandler
instead. Though elsewhere I've seen mentioned that saving should be enough to push context contents through the hierarchy. Does saving only work from child -> parent and not from parent -> child.
Or am I just doing it wrong?
Anyone's time and help is really appreciated! Cheers.
please look at the 'Parent/Child Contexts' section in the Multi-Context CoreData.
Whenever a child MOC saves the parent learns about these changes and this causes the fetched results controllers to be informed about these changes as well. This does not yet persist the data however, since the background MOCs don’t know about the PSC. To get the data to disk you need an additional saveContext: on the main queue MOC.
I do saving to the PSC n following way:
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_BACKGROUND, 0), ^{
{
// read JSON data file
// parse JSON into dictionaries etc
// iterate over dictionaries
NSError* error;
if (self.managedObjectContext.hasChanges)
{
[self.managedObjectContext save: &error];
}
// Save main context
dispatch_sync(dispatch_get_main_queue(), ^
{
[[AXContextHelper sharedInstance] saveMainContext];
});
}
After looking into all the suggestions I could find for similar problems, none of them seemed to help.
The scenario i was describing in the end had the store stuff to file handled ok, but the UI not updating. At the time when I do this import/export I'm in a view ontop of the core data table view controller that doesn't update when I inject all these JSON objects, so in the end all I did was force that controller to re-fetch it's data. I believe the NSFetchedResultsController is meant to monitor the managedObjectContext and update the fetch request as required. For whatever reason, this wasn't working.
With the force re-fetch called, everything seems to work ok. The newly injected entities appear in my tables, and are saved to the store files.
Either there are some bugs in these objects, or I'm still using it wrong but I see other problems... my import/export data both work now on background threads with the parent context. What I've noticed today is that I can use the UI to properly insert and edit some objects using the child context on the main thread. I don't deliberately call anything at the moment after making these edits so i guess the edits are are still pending till core data decides to save. If i then go to my export feature and use it using the parent context then i find the newly edited or inserted objects aren't there.
Clearly there's no messaging happening in time from child -> parent, and messaging from background thread edits on the the parent itself just doesn't seem to work.. I never get any notifications for the edits i perform in a thread on the parent context, even though they seem to work. If I force the save to happen via the documents then the passed in dictionaries show no edits being made, even though the edits are saved correctly to store files somehow.
I guess i now need to force my document to save after every operation, or at least before every operation i'm about to do on another thread to ensure the parent/child are both in sync.
Still the problem I originally described I've managed to get around, but I'm still left wondering quite how I should be using the parent and child context of a UIManagedDocument to avoid encountering these issues.
I'm confused on how the a child MOC (NSPrivateQueueConcurrencyType) works with a parent MOC (NSMainQueueConcurrencyType) with respect to the following scenario. I need to has a background thread check a web server for new or updated data. When something is received, I need to save or update the parent MOC. Sounds simple enough, and I see various examples. However, I'm still confused on a couple of things.
When processing data in the background thread, I can easily save the object in the child MOC. However, in my data model, I have relationships set up as recommended. So, for example, a ConversationThread will contain an array of Messages. Each Message will have Message.parentConvoThread set in the relationship. So, whenever I'm getting new messages from the server...
How do I associate the new Message object, which is created in the child privateMOC, with the ConversationThread (currently in the parent mainMOC)?
Now, say that I'm getting updated personal info for the person who wrote the message. I see they have updated data on the server, so I need to update their data in app. In the privateMOC...
How do I get the actual object (say it's MyContact) from the mainMOC to explicitly update? or...
If I create a new MyContact in the privateMOC, how do I merge that with the currently existing MyContact in the mainMOC? ...or does it automagically happen somehow? (<- I've read a lot of older threads that say you to use NSManagedObjectDidChangeNotification and manually merge but that this isn't necessary anymore...but how/why?)
Finally, a couple of questions about searching...
Can a search against the child privateMOC return results from the parent mainMOC (say if an entity exists in the parent but not the child)?
If the answer to #1 is true, what happens if the entity exists in both but hasn't been merged?
I'm quite confused on how they work together. Any help is greatly appreciated.
NSManagedObjectContexts are in memory caches of the data from an NSPersistentStore. A fetch on a child context will be executed through the parent context on the NSPersistentStore, and the data from the objects will be retrieved from either the cache in the child context, the parent context, or all the way from the persistent store (wherever it can first find the data).
If you are fetching from a child context, the results will be retrieved through the parent context, and you can expect this fetch request to return objects as though you fetched from the parent context.
Going the other direction, as long as all the changes you have made to your child context have been saved, those changes will be reflected in the parent context, because core data automatically handles the merge from child to parent.
The only trick is if you have references to objects in the child context, and changes are saved in the background to the parent context, you will either need to re-fetch those objects on the child context to get changes from the parent, or you can manually merge the changes on the parent's NSManagedObjectContextDidSaveNotification. See this post for more information: How to keep a child NSManagedObjectContext up to date when using bindings.
I'm losing my mind around this question.
So I have a Core Data setup in my iOS app done this way:
http://www.cocoanetics.com/2012/07/multi-context-coredata/
I then insert an object by creating a temporary MOC (as explained in the blog post) and perform saves on all 3 contexts in performBlock: methods.
In a view controller I have an NSFetchedResultsController and it gets notified that I did indeed insert a new object. The problem is that the NSFetchedResultsChangeInsert is fired twice and each time the object that is passed trough has a different objectID (it also is a different object instance in memory). What happens is that I then have 2 rows inserted in my table view but un the SQL database there is only one new. It then of course crashes when I scroll to the bottom of the table view.
If I also perform some updates on the object I get NSFetchedResultsChangeUpdate called only once and with the objectID that was passed in the second NSFetchedResultsChangeInsert call.
The first ID looks like this:
<x-coredata:///ReceivedMessage/t605BB9A7-A04E-4B89-B568-65B12E8C259A2>
The second (and all consequent ones) like this:
<x-coredata://02A917C5-850F-4C67-B8E4-1C5790CF3919/ReceivedMessage/p28>
What could this be? Am I missing out something obvious?
PS: I also checked if the notification comes from the same context, thread, etc. It does.
The two IDs you are seeing may very well represent one object. The difference between them is just that the first one is a temporary object ID, assigned to the object on creation, and the second one is the permanent object ID, assigned to the object when it gets stored to the managed object store (see NSManagedObjectID's isTemporaryID).
To work around this issue you could call NSManagedObjectContext's obtainPermanentIDsForObjects:error: just before you save the temporary MOC. This way the inserted object will have just one ID during the save propagation and the NSFetchedResultsControllerDelegate methods should get called just once.