I am using a CGRect to cut an image out of an imageview. The rectangle is generated automatically depending on features on the imageview but I would like to enlarge it slightly maybe by 10% but around the same point.
To get the sizes of something I would normally use frame like this:
CGRect frame = _imageView.frame;
CGImageRef imageRef = CGImageCreateWithImageInRect([image CGImage], frame);
UIImage *img = [UIImage imageWithCGImage:imageRef];
Then change with origin.x however I am unable to get the frame of my existing rectangle.
Any help greatly appreciated on expanding a CGRect
Have a look at CGRectInset, I think that will do what you want. Depending on the sign of the insets, you can make a rectangle that's smaller or larger than the original with the same center point.
Related
I am trying to resize an image using UIGraphics. The image is one taken with the camera, and I am using this code:
CGSize origImageSize = photograph.size;
//this saves as 140*140 for retina
CGRect newRect = CGRectMake(0, 0, 70, 70);
//scaling ratio
float ratio = MAX(newRect.size.width/origImageSize.width, newRect.size.height/origImageSize.height);
UIGraphicsBeginImageContextWithOptions(newRect.size, NO, 0.0);
CGRect projectRect;
projectRect.size.width= ratio*origImageSize.width;
projectRect.size.height=ratio*origImageSize.height;
//center the image
projectRect.origin.x= ((newRect.size.width-projectRect.size.width)/2);
projectRect.origin.y=((newRect.size.height-projectRect.size.height)/2);
[photograph drawInRect:projectRect];
//get the image from the image context
UIImage *smallImage = UIGraphicsGetImageFromCurrentImageContext();
For some reason the final photo isn't as sharp, it's slightly blurry. Am I doing anything wrong here? Any pointers would be really appreciated. thanks
I assume you calculate rectangle properly. Then make sure you use integral rectangle. Non-integral values may cause sub pixel rendering.
Run your projectRect through CGRectIntegral to get integral rectangle, then use it to render your image.
projectRect = CGRectIntegral(projectRect);
I've got an image that I need crop. To do this, I wanted to use the contentMode (set it to Top/TopLeft instead of Aspect Fit) but when I'm doing this, the image go back to it's real size (and not the size I gave to it). So my question is :
How to crop the bottom of my image retaining its size ?
Thanks a lot.
May be you have to set the rect for the imageView
imageView is the instance of UIImageView
Let the rectangle to be cropped is croppedRect
CGImageRef imageRef = CGImageCreateWithImageInRect([imageView.image CGImage], croppedRect);
[imageView setImage:[UIImage imageWithCGImage:imageRef]];
CGImageRelease(imageRef);
I have an oversized image loaded in a image view that goes out of bounds both vertically and horizontally.
The end user can scroll around the image (the oversized imageview is in a scrollview) and when they find an area that they like I would like to crop out the area of the image that is shown on the screen. (much like a screenshot but only of the imageview.image I'm then going to put that into a different Imageview.
I can't seem to work out how to accomplish the "screenshot" of the area of the image view's image that is currently showing on the screen.
You can use CGImageCreateWithImageInRect to create a subimage of the displayed image. Use contentOffset and the scrollViews bounds to create the rect from which you want to create the image.
CGRect rect = CGRectMake(scrollView.contentOffset.x, scrollView.contentOffset.y, CGRectGetWidth(scrollView.bounds), CGRectGetHeight(scrollView.bounds));
CGImageRef subImageRef = CGImageCreateWithImageInRect([originalImage CGImage], rect);
If you zoom your scrollView you will need to take the zoomLevel into account too.
I ended up using the following code to achieve what I was looking for to grab the image. Thank you to Karl for his input and a thank you to iNoob whom answer to a previous question [Located here on StackOverflow][1] I used for mine.
Just use the below code to take a "screenshot" just set anything you don't want in the image to.hidden = True; before the code to hide it from the screenshot and set them to .Hidden = FALSE; after the code to bring them back.
UIGraphicsBeginImageContextWithOptions(self.view.bounds.size, self.view.opaque, 0.0);
[self.view.layer renderInContext:UIGraphicsGetCurrentContext()];
UIImage *theImage = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
I have a UIImage that is reading from a transparent PNG (500px by 500px). Somewhere in the image, there is a picture that I want to crop out and save as a separate UIImage. I also want to store the X and Y coordinates based on how many transparent pixels there were on the left and top of the newly cropped rectangle.
I was able to crop an image with this code:
- (UIImage *)cropImage:(UIImage *)image atRect:(CGRect)rect
{
double scale = image.scale;
CGRect scaledRect = CGRectMake(rect.origin.x*scale,rect.origin.y*scale,rect.size.width*scale,rect.size.height*scale);
CGImageRef imageRef = CGImageCreateWithImageInRect([image CGImage], scaledRect);
UIImage *cropped = [UIImage imageWithCGImage:imageRef scale:scale orientation:image.imageOrientation];
CGImageRelease(imageRef);
return cropped;
}
Which actually cuts off the transparent pixels on the top and left :S (this would be great if I was able to crop the pixels on right and bottom too!). It then resizes the rest of the image to the rectangle I specified. Unfortunately though I need to cut a picture that is in the middle of the image and I need the size to be able to be dynamic.
Been struggling with this for several hours now. Any ideas?
To crop an image, draw it into a smaller graphics context.
For example, let's say you have a 600x600 image. And let's say that you want to crop 200 pixels off all four sides. That leaves a 200x200 rectangle.
So you would make a 200x200 graphics context, using UIGraphicsBeginImageContextWithOptions. Then you would draw the image into it using drawAtPoint:, drawing at the point (-200,-200). If you think about it, you will see that that offset causes just the 200x200 from the middle of the original to be drawn into the actual bounds of the context. Thus you have cropped the image by 200 pixels on all four sides, which is what we wanted to do.
Thus here is a generalized version, assuming that we know the amount to crop from the left, right, top, and bottom:
UIImage* original = [UIImage imageNamed:#"original.png"];
CGSize sz = [original size];
CGFloat cropLeft = ...;
CGFloat cropRight = ...;
CGFloat cropTop = ...;
CGFloat cropBottom = ...;
UIGraphicsBeginImageContextWithOptions(
CGSizeMake(sz.width - cropLeft - cropRight, sz.height - cropTop - cropBottom),
NO, 0);
[original drawAtPoint:CGPointMake(-cropLeft, -cropTop)];
UIImage* cropped = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
After that, cropped is your cropped image.
I am letting the user capture an image from the camera or picking one from the library.
This image I display in an UIImageView.
The user can now scale and position the image within a bounding box, exactly like you would do using the UIImagePickerController when allowsEditing is set to YES.
When the user is satisfied with the result and taps Done I would like to produce a cropped UIImage.
The problem arises when using CGImageCreateWithImageInRect as this does not take the scaling into account. The transform is applied to the imageView like this:
CGAffineTransform transform = CGAffineTransformScale(self.imageView.transform, newScale, newScale);
[self.imageView setTransform:transform];
Using a gestureRecognizer.
I assume what is happening is; the UIImageView is scaled and moved, it then applies the UIViewContentModeScaleAspectFit to the UIImage is holds and when I ask it to crop the image, it does exactly that - whit no regards to the scaling positioning. The reason I think this, is that if I don't scale or move the image but just tap Done straight away the cropping works.
I crop the image like this:
- (UIImage *)cropImage:(UIImage*) img toRect:(CGRect)rect {
CGFloat scale = [[UIScreen mainScreen] scale];
if (scale>1.0) {
rect = CGRectMake(rect.origin.x*scale , rect.origin.y*scale, rect.size.width*scale, rect.size.height*scale);
}
CGImageRef imageRef = CGImageCreateWithImageInRect([img CGImage], rect);
UIImage *result = [UIImage imageWithCGImage:imageRef scale:self.imageView.image.scale orientation:self.imageView.image.imageOrientation];
// UIImage *result = [UIImage imageWithCGImage:imageRef];
CGImageRelease(imageRef);
return result;
}
Passing in a cropRect from a view that is a subView of my main view (the square overlay box, like in UIImagePickerController). Main UIView has a UIImageView that gets scaled and a UIView that displays the crop rectangle.
How can I get the "what you see is what you get" cropping and which factors must I take into account. Or maybe suggestions if I should implemented the hierarchy or scaling differently.
Try a simple trick. Apple has got samples on its site to show how to zoom into a photo using code. Once done zooming, using graphic context take the frame size of the bounding view, and take the image with that. Eg Uiview contains scroll view which has the zoomed image. So the scrollview zooms and so does your image, now take the frame size of your bounding UIview, and create an image context out of it and then save that as a new image. Tell me if that makes sense.
Cheers :)