I'm trying to affect the timing of implicit CALayer animations using the CAMediaTiming protocol implemented by CALayer.
So far, it seems I have to do
[CATransaction begin];
[CATransaction setAnimationDuration:d];
layer.frame = newFrame;
[CATransaction commit];
layer.timeOffset = -1;
to create a 1 second delay for the implicit animation
Unfortunately what seems to happen here is very briefly the animation starts (the layer moves a tiny amount) and then pops back into place and waits for 1 second before starting the actual animation.
I believe that this is due to a delay in propagating the timeOffset information to the render tree. I've tried playing around with [CATransaction flush], but haven't found an arrangement that doesn't have the initial stutter.
Has anyone successfully used a CALayer's CAMediaTiming methods to change the timing of implicit animations?
I found http://wangling.me/2011/06/time-warp-in-animation.html quite useful when using CAMediaTiming. Especially the explanations regarding timeOffset and beginTime might be of interest to you.
Related
I'm currently implementing a CABasicAnimation that animates a CALayer transform property.
Now, although I'm new to Core Animation, I have been able to gather through various blogs and articles such as objc.io that it is a very bad idea to use the often (incorrectly) recommended method for getting animations to stick using the fillMode and removedOnCompletion properties of an animation. This method is considered bad practice by many because it creates a discrepancy between the model layer and the presentation layer, and so future queries to one of those layers may not match up with what the user is seeing.
Instead, the recommended way of doing animations is to update the model layer at the same time you add the animation to the layer being animated. However, I'm having trouble understanding exactly how this is working. My animation is simple, and goes like this:
CATransform3D updatedTransform = [self newTransformWithCurrentTransform];
// Location 1
CABasicAnimation *transformAnimation = [CABasicAnimation animationWithKeyPath:#"transform"];
transformAnimation.duration = 1;
transformAnimation.fromValue = [NSValue valueWithCATransform3D:self.layerBeingAnimated.transform]; // Does not work without this.
transformAnimation.toValue = [NSValue valueWithCATransform3D:updatedTransform];
// Location 2
[self.layerBeingAnimated addAnimation:transformAnimation forKey:kTransformAnimationKey];
// Location 3
I've denoted three locations where I have attempted to update the model layer using the code
self.layerBeingAnimated.transform = updatedTransform;
In location 1, the layer jumps right to newTransform and does not animate.
In location 2, the layer animates exactly as I want it to from the current transform to newTransform.
In location 3, the layer jumps right to newTransform, jumps back to the the old transform, animates correctly from the fromValue to newTransform, and then stays at newTransform.
What's the deal here? What's the correct location to update the model layer and why are these three locations producing such different results?
Thanks!
I think that it's easiest to explain what is happening for each of the three locations and then a "conclusion" at the end.
I'm also adding some illustrations, showing exactly the behaviour that you are mentioning in your question so that it will be easier to follow for someone who hasn't tried these three things themselves. I'm also extending the illustration to show both a stand alone layer and a backing layer (one that is attached to a view) and I will explain the difference where there is one.
Location 1
In the first location, the model value is updated before the animation is created. Once this is done, the transform property holds the updatedTransform. This means that when you read the transform from the layer for the fromValue, you get the updatedValue back. This in turn means that both to and from value are the same so you can't see the animation.
One thing that could have made this location work as expected is to read the oldValue before assigning the new value and then use that as the fromValue. This will look as expected.
// Location 1
CATransform3D oldValue = layer.transform; // read the old value first
layer.transform = updatedTransform; // then update to the new value
CABasicAnimation *anim = [CABasicAnimation animationWithKeyPath:#"transform"];
anim.duration = 1.0;
anim.fromValue = [NSValue valueWithCATransform3D:oldValue];
anim.toValue = [NSValue valueWithCATransform3D:updatedTransform];
Location 2
In the second example, the value isn't yet updated when you read the transform for the from value, so the fromValue and toValue are different. After that, the model value is updated to it's final value. There is actually a difference between the stand-alone layer and the backing layer here, but we don't see it. The transform property on CALayer is animatable and will automatically perform an "implicit" animation when the value changes. This means that an animation will be added to the layer for the "transform" key path. The view, however, disables this behaviour when the change happens outside of an animation block, so there is not implicit animation there.
The reason why we don't see the implicit animation is that the "explicit" animation is added afterwards for the same key path. This means that the only explicit animation will be visible, in both cases, even thought there are two animation running on the stand-alone layer (more on that later). If you are feeling cautious, then you could disable the implicit action for the stand-alone layer (more on that later).
Location 3
This leaves us with the last location. In this case the animation is created just as above, with different fromValue and toValue. The only difference is the order of adding the explicit animation and changing the property which triggers an implicit animation. In this case the implicit animation is added after the explicit animation and they both run(!). Both animations actually ran for location 2, but we couldn't see it because the explicit (longer) animation was added before.
Since everything is moving so fast, I slowed down the entire layer to try and illustrate what is happening when two animations are running at once. This way it becomes much easier to see what happens when the implicit animation ends. I've overlaid the well behaving backing layer and the misbehaving stand-alone layer and made them both 50% transparent. The dashed outline is the original frame.
A short description of what is happening: the blue view get's only the explicit animation added to it (which has a 1 second duration). The orange layer first has the same explicit animation added to it and then has an implicit 0.25 second animation added to it. Neither explicit nor the implicit animations are "additive", meaning their toValue and fromValue are used as-is.
Disclaimer: I do not work at Apple and I haven't seen the source code for Core Animation so what I'm about to say is guesswork based on how things behave.
In my understanding (see disclaimer) this is what happens for every screen refresh to produce the animation: for the current time stamp, the layer goes through the animations in the order they were added and updates the presentation values. In this case, the explicit animation sets a rotation transform, then the implicit animation comes and sets another rotation transform that completely overrides the explicit transform.
If an animation is configured to be "additive", it will add to the presentation values instead of overwriting (which is super powerful). Even with additive animations, order still matters. A non-additive animation could come later and overwrite the whole thing.
Since the implicit animation is shorter than the explicit one, we see that for the first part of the total animation, the values are strictly coming from the implicit animation (which was added last). Once the implicit animation finishes, the only remaining animation is the explicit animation which has been running underneath the implicit one, all this time. So when the implicit animation finishes, the explicit animation has already progressed 0.25 seconds and we see that the orange layer jumps back to the same value as the blue view, instead of jumping back to the beginning.
Where should we update the value?
At this point, the question is, how can we prevent two animations from being added and where should we update the value? The location where the value is updated doesn't prevent there from being two animations (but it can affect how the end result looks).
To prevent two actions from being added to the stand-alone layer, we temporarily disable all "actions" (a more general term for an animation):
[CATransaction begin];
[CATransaction setDisableActions:YES]; // actions are disabled for now
layer.transform = updatedTransform;
[CATransaction commit]; // until here
When we do this, only one animation is added to the layer so either location 2 or 3 works. That is simply a matter of taste. If you read the oldValue, the you can also use location 1 (as long as the action is disabled).
If you are animating a backing layer then you don't have to disable actions (the view does that for you) but it also doesn't hurt to do so.
At this point I could keep going about other ways to configure an animation, what an additive animation is, and why you needed to specify both the toValue and fromValue in this case. But I think that I have answered the question you asked and that this answer already is a bit on the long side.
If you open up the timer app on your iPad, you get this beautiful grey circle that slowly turns red as you come closer to time running out. I'd like to learn to mimic this. I've found Quartz 2D to be one option, although I've found little information about using it for iOS. I'm quite the n00b at all this, so I could be missing some huge, some easier way to make the circle go around. Plus keep the current time remaining in the middle.
So, if anyone could point me in the right direction, I would be uber grateful. Thanks in advance!
You can do that using CAShapeLayer to make the circle. Use Core Animation to animate the transition from one color to another over time. CAShaperLayer's fillColor property is animatable. It'd go something like this:
CAShapeLayer *myCircleLayer = ...; // create a circle layer and add it to your view
CABasicAnimation* transition = [CABasicAnimation animationWithKeyPath:#"fillColor"];
transition.fromValue = [UIColor grayColor];
transition.toValue = [UIColor redColor];
transition.duration = secondsUntilTimerExpires;
[myCircleLayer addAnimation:transition forKey:#"fillColor"];
You might want to add the animation only when the timer is getting close to expiring. A very long, slow animation, over an hour for example, would make the circle mostly red for a fairly long time, which doesn't help the user determine the time until the timer expires.
I have a layer that I wish to fade out implicitly:
[CATransaction setValue:[NSNumber numberWithFloat:4.0f] forKey:kCATransactionAnimationDuration];
layer.hidden = YES;
From a memory point of view, however, I understand that layer still exists in the layer tree even after I have faded it out. Although this might seem like a silly question, I am interested in your thoughts on this: how should one remove layer from the layer tree? Do we need to?
Assuming that it needs to be removed: it seems that if I remove the layer from the super layer immediately after writing layer.hidden = YES;, the sublayer is removed immediately and no time is given for the control to have a fade out effect. I observe the same thing even when I place removeFromSuperlayer in a CATransaction completion block.
I am trying out different looks of a little game I am writing to play with animation on iOS.
My goal is this to have a grid of tiles which based on gameplay changes the display of each tile to one of a set of images. I'd like each tile (up to 24x24) to flip around when its face changes. As the game progresses, more and more tiles need to be flipped at the same time. In the first implementation where I tried to flip them simultaneously the animation got very jerky.
I changed my approach to not flip them all at once, but just a few at a time, by scheduling the animation for each tile with a slightly increasing delay per tile, so that when say the 10th tile starts animating, the first one is already done. It takes little while longer for the whole process to finish, but also leads to a nice visual ripple-effect.
However, one problem remains: At the beginning of a game move, when the player picks a new color, it takes a few fractions of a second on the device, before the animation starts. This gets worse as the game progresses and more flips need to be scheduled per move, up to the point where the animation seems to hang and then completes almost instantly without any of the frames in between being actually discernible.
This is the code (in my UIView game grid subclass) that triggers the flipping of relevant tiles. (I removed an optimization that skips tiles, because it only matters in the early stages of the game).
float delay = 0.0f;
for (NSUInteger row=0; row<numRows; row++) {
for (NSUInteger col=0; col<numCols; col++) {
delay += 0.03f;
[self updateFlippingImageAtRow:row col:col delay:delay animated:YES];
}
}
The game grid view has an NSArray of tile subviews which are addressed using the row and col variables in the loop above.
updateFlippingImageAtRow:col:delay:animated is a method in my FlippingImageView (also a subclass of UIView) boils down to this (game logic omitted):
-(void)animateToShow:(UIImage*)image
duration:(NSTimeInterval)time
delay:(float)delay
completion:(void (^)(BOOL finished))completion
{
[UIView animateWithDuration:time
delay:delay
options:UIViewAnimationOptionTransitionFlipFromLeft
animations:^{
[UIView setAnimationTransition:UIViewAnimationTransitionFlipFromLeft
forView:self
cache:YES];
self.frontImage = image;
}
completion:completion
];
}
Works fine, however, I conclude from the Instruments measuring which tells me that my time is spent in the animation block, that as the game goes on and the number of tiles to flip goes up, that the number of animations that get scheduled at the very beginning of the operation is a problem, and that the system then tries to catch up by dropping frames.
Any suggestions how to improve the performance of this? The exact timing of the animation is not really important.
You can think about doing this with CoreAnimation and CALayers instead of UIViews. It is incredebly powerful and optimized framework.
It's not an easy thing, you'll have to recode at least some of your classes (view hierarchy and hit tests are the first things that come to my mind), but it's worth a try and it's rather painless process, because CALayer is very similar to UIView.
Next step is OpenGL. It definitely can operate several hundreds of objects in realtime, but it requires much more work to do.
You might want to try using CoreAnimation instead. One way to do the flip animation would be:
Create a CABasicAnimation that animates the first half of the flip (rotation along the y axis).
In the delegate method animationDidStop:finished: you set the new image and then create a new animation that animates the second half.
You simply apply the animation to the layer property of your view.
Note that you can use setValue:forKey: to "annotate" an animation (remember what object the animation is about). When you add an animation to a layer it gets copied, not retained, so you can't identify it by simply comparing pointer values.
I have a CAKeyframeAnimation of a sprite sheet's contentsRects property to show an animation in a CALayer. Everything works most of the time, but occasionally I see a wrong part of sprite sheet for a one frame. CAKeyframeAnimation is set to discrete mode and all the coordinates are checked. Seems to me that once in a while CAKeyframeAnimation misses a keyframe and shows me just a center piece of my sprite sheet instead of a piece that it suppose to cut out based on provided array of contensRects. How to fix the above? Also on the same topic how to debug CAKeyframeAnimation in general and find out what's going on?
thanks!
to fix it I've wrapped my animation in CATransaction and temporarily disabled all layer actions:
[CATransaction begin];
[CATransaction setValue:(id)kCFBooleanTrue forKey:kCATransactionDisableActions]; // we need to disable all layer actions temporarily
.............. the rest of animation code ...............
[CATransaction commit];
thank you Apple's documentation!