My problem is that in my scenario, I have a project with two parallel project files for different build targets. I have a ProjectName.WP8.csproj and ProjectName.WinRT.csproj, which essentially include the same files.
I am trying to check-in this solution (SolutionName.WinRT.sln) to TFS and I get no errors. All the code changes to the code in the project goes through, but when I check the actual state of TFS, the (newer) PorjectName.WinRT.csproj files are not checked in.
This is quite peculiar since it worked perfectly for the WP8 version. How can I support this kind of scenario?
(If it's not possible, how do I easily migrate my parallel project to another TFS project?)
Just had this come up myself. I had been working on a project for a few days before checking the solution in. During the initial check in for the project, only the most recent file edits were seen by source control. I was able to highlight all the files in the Solution Explorer and select Add to Source Control from the right click menu, but the csproj files themselves did not check in. To do this, I had to go into the Source Control Explorer and open the project directory. From within the directory, right click and select Add Items to Folder. Then you can select the csproj files and you're good to go.
Related
Unlike the other projects, new files in the database project (.sqlproj) are not available while trying to check-in from solution explorer. I can able to see the changed files but not new files.
Every time I add new files, I need to go to Source control explorer and look for "Add Items to folder" option.
It messes when there are few changed files and few added files. We will check-in from solution explorer and after some time the production team will curse us for not including the files.
Anyone facing the same? Do I miss anything?
I have a situation where a developer made mass changes to a project outside of TFS (long story), and now we want to put those changes back into TFS (files added, removed, renamed).
Of course, TFS is not like Git; if I check out the project, then delete the files from the workspace and copy over the new files, TFS won't adapt to those changes.
I have discovered that I can do a Compare from File - Source Control, and that the Compare screen allows me to mark files as added/deleted. This helps, but is a slow process for a large project, and quite prone to human error.
So, my question is: Is there an automated way to get TFS to simply add all new files and remove all deleted ones?
I don't care about tracking history of renamed files--they can be
considered "removes" and "adds."
I have tried unbinding and rebinding the workspace; this did not work for me (or I didn't do it correctly).
I am using VS 2015, TFS 2015, and I have the TFS Power Tools.
If you are using a Local Workspace then you should be able to get latest on the workspace, then copy over all the new files in Windows Explorer which will generate pending changes and file adds.
If you go into Pending Changes in Team Explorer you will have lots of detected changes for new files etc. but you can promote them to included changes.
This isn't going to deal with file renames or deletions though so it might not be the best solution.
Alternatively you could use Reconcile Changes in Version Control
In Source Control Explorer, right-click a folder, and then click Compare.
In the Compare dialog box. select the folder versions to compare.
In the Folder Difference window, right-click the folder or file you want to reconcile, and click Reconcile.
This will allow you to choose what to add or change to version control
You might try using tfpt online. I would add the /adds /deletes /diff /recursive flags as well.
I think in almost any case you will have some conflicts/manual work to do here.
There is a blog post on a possibly similar situation that used tfpt online as well: Discover File Changes Made Outside of Visual Studio
Since I did not get to try the above suggestions, I'll post the workaround I did, in case it helps anybody else. Hopefully, the above suggestions are better than what I ended up doing.
Make sure nothing is checked out
Open solution
Team - Go Offline
Close solution
Windows Explorer - Copy latest source folder into the current source folder (Windows Explorer will do a Merge).
VS - Open solutin, select solution file
File - Source Control - Advanced - Change Source Control
if you get a message about unloaded projects, make sure all projects loaded. Click "Reload" on those that didn't.
Shift to select all project, click Bind
Do a Compare in Source Control Explorer. Manually add all new files. Manually delete all deleted files. Frown.
I'm currently working on a WiX project and I need to include some files in my project but exclude them from tfs. I need to do this because these files are auto-generated at compile time but they have to be part of the project to be compiled. I thought that I could exclude them from source control by going to File->Source Control->Advanced->Exclude <file> From Source Control but it still seems to be including it in TFS.
Below is a picture of my project and it appears that visual studio is trying to exclude them from tfs judging by the little red icon next to the files I'm excluding. However when I compile it errors out because the excluded files are read only and I can clearly see them checked in by looking at the source control explorer window.
Is this an issue in visual studio or am I doing something wrong here?
I resolved this by closing out my solution and deleting the files in source control explorer. Before when I was deleting them from source control explorer I had my solution open and it was actually removing them from the project file. Seems like when you exclude them from source control via the method described above it should remove them from source control but it doesn't.
Seems like this should be something very simple, but I can't find how to do this...
I made a changes to several files spread within a repo by using a script that I wrote. Problem is TFS in its infinite wisdom does not think the files have changed. Aside from manually finding each file and clicking "checkout for editing" is there any way to tell TFS to just rescan everything and detect changes?
A Folder Compare (File->Source Control->Compare...) should do the trick. Select the top folder from where to start comparison, and select to compare with Latest Version. The result hould show files that are changed, and whether they are checked out or not.
TFS has a "Reconcile" command for this. See https://stackoverflow.com/a/22860674/932282 for a complete answer.
Local Workspace
You need to work with a local Workspace. Here's how to manage workspaces:
visualstudio.com: "Create and work with workspaces".
When adding or editing the workspace you click Advanced >> . Then you set Location: to Local.
Now when your script or anything else changes files outside Visual Studio, your workspace detects the changes automatically.
It also detects adds or deletes but you have to include them to your Pending Changes manually with the link under Excluded Changes
BUT BE CAREFUL. When adds or deletes get detected and you add them to your Pending Changes, the files aren't automatically included to your project. So you maybe check them in to TFS, but they aren't listed under the Solution Explorer.
Matt Burke has a fix for that problem:
mattburkdev.com: "Automatically Include All Files in Folder in Visual Studio"
To edit the Project file you rightclick your project, chosse Unload Project, then rightclick on it again and choose Edit. After you edited the project files save and close it. Then rightclick and chose Load Project.
But with that you also need to be careful, because the Project only searches for new files in these folders to include, when you load the project and not while you have the project open. So when some files get added outside Visual Studio, you just reload the project.
Server Workspace
But if you have to stick to a Server Workspace for some reason i got another trick for you:
FIRST:
Check out all Files that maybe have pending changes (better check out many files). Then go to Team Explorer -> Pending Changes and choose all files you just checked out. Then choose "undo changes". After this you get a message "Confirm Undo Checkout". This message ONLY pops up for the files, which actually HAVE changed! Press "NO" for each files or "No to All".
FINALLY: Under pending changes all files get removed from the list except the ones which have pending changes.
I hope I could help someone and you didn't have to search for this solution as long as I had to ^^
If any of your changes occured when you were offline, you can go to File > Source Control > Go Online, and all files will be checked for modification.
If none of the above work, you can also try to rebind your projects by going to File -> Source Control -> Advanced -> Change Source Control.
In Visual Studio 2015:
Source Control -> Advances -> Refresh Status
I had this problem a while age when i moved project from one pc to another.
the solution was to remove temporary files that TFS had created in solution folder.
Delete .vs and hidden $tf folder.
If no luck,on your local PC copy your solution folder to another, remove all files inside solution, get latest version from TFS server ,then from the copied folder just grab neccessary and edited files and put them back to solution folder (this will overwrite some files).
After all don't forget to check project mappings and if everything seems correct try right clicking on solution and 'Add to source control' option.
Dtsx file dropped in TFS folder was not being recognized.
On your Visual Studio (2015) home screen, click on the Team Foundation Server link. Make navigate to the correct branch.
On the window on the left side of the screen, navigate to the folder that contains your file. Expand the folder.
To the right of the folder you will see three dots. Click on those and then click on “ + Add File(s)”.
Choose “Upload Existing Files”. Then you can drag and drop your .dtsx files into the window and then click Okay.
Finally, you’ll have to do a ‘Fetch’ to add the files there. Then you need to do a ‘Pull’. Lastly, you can commit the change to remote branch.
I'm using team foundation server 2010 # work and home.
I want to exclude some element from the project build but still have them exist in Team Foundation Server 2010 source control. How do I achieve this?
Exclude From Project will delete the item.
Same problem here, only way to do this is manually edit project file :(
Please vote that this bug is important to fix
https://connect.microsoft.com/VisualStudio/feedback/details/573582/vs-2010-exclude-from-project-deleting-files-from-source-control
Workaround posted on Connect:
Open the csproj file in notepad and find the files that need to be
excluded and remove or comment the compile element for that file, and
any related designer and resx files.
Editing a project file and removing the references to the files you want to exclude would be the easiest solution.
Another solution would be to remove files from the project via UI, but only checkin changes in the project file and undo the delete operations.
In the future you can add files directly to the TFS folder in Team Explorer.
May I ask: why would you want to do that? As I commonly have a problem of files which are not bound to any project and have to be getted manually.
I work in a TFS environment, and if it were me? I'd just change the name of the file (instead of excluding it from the project), and check that in instead. Since your project is expecting that particular filename...it won't find it. We use this when we're developing prototypes or holding on to antiquated code for documentation purposes. Sorry VS is eating your stuff!
Kind Regards,
-sf
I think these steps should help you do what you are looking for.
To exclude an item from a deployment project:
In Solution Explorer, select the file you want to exclude.
On the Solution Explorer toolbar, select Properties.
In the Properties window, set the Exclude property to True.
And this page explains the actions for project files supported by VS 2010:
http://msdn.microsoft.com/en-us/library/0ebzhwsk.aspx
--- Edit ---
At work I tried 'Exclude From Project' in one of the files of a project we have in VS 2010, which is bound to a TFS 2010 server, and this action did not delete the item from TFS; the Source Control Explorer window shows the red delete mark next to the item, and the 'Pending Change' column says delete, but item is there. Right click the item in the Source Control Explorer window, one of the commands in the context menu that pops-up is 'Check In Pending changes' and another one is 'Shelve Pending changes'. Shelving enables you to set aside the pending changes.
The file is still in the local hard drive. If I do 'Include In Project' the item comes back to normal.