Related
when I load my application it shows a warning message that
"Could not load the "" image referenced from a nib in the bundle with
identifier "
I searched and confirmed all my images. But it still shows that warning.
Select your image(s) in Project Navigator.
Open the File Inspector.
Make sure you have the target selected.
I had the same issue when I Refactor to Storyboard. Apparently the Asset catalog does not transfer the image reference. To fix, see below:
You would notice that your ImageViews is empty from reference.
1 - Click on the ImageView
2 Go to the Utilities bar where you would see you asset image is unknown
3 - Change it back to you image asset
This should fix your error. Hope this helps!
There might be many reasons of this error. To fix this issue you can just follow below given step:
Go to product menu of the Xcode, select clean.
If still you are getting the error, then remove the images from your project and again add the images to your project.
while adding image into the project, make sure that you have selected the Project name inside the "Add to targets". And also enable the "Copy items if needed".
Please Refer below image for better understanding:
Just select the image in Xcode and in right side, File inspector, under 'Target Membership' make sure your project is selected.
Another thing you can do is delete and re insert your image and make sure 'Copy items if needed' is selected and 'Add to targets' your project is selected.
Click on the image file in your Xcode navigator.
Once selected, go to the right side bar (of XCODE) which is
utilities and under file inspector, scroll to target membership and
select your project target file.
Then build and run the project again.
Xcode9 beta2 release note:
Jpeg assets in asset catalogs are not found on iOS 10 or earlier for apps built with Xcode 9. APIcalls for accessing the image such as UIImage.imageNamed: return nil. (32524123)
Workaround: Use png resources or limit app testing to devices running iOS 11 or later.
Xcode9 beta3 release note:
Jpeg assets in asset catalogs are found on iOS 10 or earlier for apps built with Xcode 9.(32524123)
For those that are getting this error while developing a cocoapod
I was trying to use an image from my pod's bundle, thats inside a .xcassets file, in the storyboard. It would show fine in the storyboard but when i ran the app it would crash saying it cant find the resource.
I changed my podspec to include s.resources as well as s.resource_bundles
s.resource_bundles = {
'SDKRes' => ['SDK/Assets/*']
}
s.resources = ['SDK/Assets/*.{xcassets}']
Then it was able to load the resource properly from the storyboard
You can try opening your storyboard or nib as Source Code and then "Find" the image name in it, see if it exists but already invalid in your project, probably you have deleted or changed its name, and now it doesn't seem valid.
I have just updated to XCode 9 and it started giving me this issue. I created a new Image Set in the Assets section and added the images I wanted to this, then re-added them to my tab bar images with custom names and it worked fine. Hope this helps!
PROBLEM
This happened to me seemingly out of the blue on a tab bar controller with icons for each tab. The storyboard was still showing my image icons and the assets existed with the expected names.
MY FIX
Select the tab bar icons in their respective view controller and reassign the image like you did the first time.
This happened to me as well. I was doing everything right when adding the image but for some reason it was not working. I had to click on the image again once added, and then on the right toolbar under "Target Membership" I noticed my project was not selected even though I was selecting it when adding the image. I selected it here and everything worked fine.
I got the same error message (in XCode 8), even though the app ran fine (in the simulator and on the device).
I found the problem: In my storyboard, using the document outline pane, I clicked through every single UIImage, and looking at the attributes inspector for each UIImage - in the Image View section - found that one UIImage had a blank file name (instead of the .png file name containing the image). Reselecting the .png file name from the dropdown box fixed the error message.
I have fetching same issue in xcode 9.
just tick on target membership
I pulled my hair out over this issue for hours and none of the solutions in this thread worked. The problem, in the end, was that the Xcode project files were stored on a Google Drive file stream. As soon as I moved it to the local drive or iCloud it worked fine.
My case was a bit different. I was using an old IBDesignable element which had some property of setting an image directly from the storyboard. Since that element was old, hidden and unused the images it had were not present in my assets folder.
Now Xcode won't be able to search this image since it is not in the project anymore. But if you search in the finder, inside your project, you'll find the XIB/Storyboard in which it is mentioned. From there you can find it manually by opening that XIB or Storyboard as source code and search. Once found either replace them with a new image or remove the unused element.
Look into storyboard file you'll see a question mark icon on any of the imageView (as shown in screenshot below) or UIButton image.
Just correct it and the warning will be gone.
Hope this helps
My guess is that you have an image in the Project Setting->Build Phases->Copy Bundle Resources which loses its reference and appears in Red text color. Remove this image from there and re-add.
This happens often due to relocate the image file after adding into project where image was added as a reference instead of a copy.
May be this can fix your issue.
Urughhh. I tried to fix this with all the above solutions, but nothing worked. What finally worked was:
Delete image from your project and select Move to Trash
Clean project
Close and restart XCode
Rename your image filename so something other than the previous name
Add new image to your project
I was facing the same problem, I solve it by deleting folder and create again and past all images then add reference again.
Based on what #hstdt posted above, it made me think I should check that my image is a filetype that doesn't have any bugs related to it. (https://stackoverflow.com/a/44558948/6804257)
I was using a .gif. I got rid of that image and instead used a .png. Now it works.
Had the same issue and none of these answers worked for me. Instead I restarted the mac and iPhone I was working with and then everything started to work fine again. 🤷♂️
My case is difference. I have more one assets folder. So I added to the wrong one.
Just remove and add to the right.
In my case,removing and adding the assets folder from the target fixed the issue.
Xib sets a wrong name for folder reference images. For example I have the folder like Menu->icon.png. Xib sets the "icon" name for the image. It should be "Menu/icon". So do no set images in xibs if you use a folder reference images.
This has to be the worst bug I ran into with Xcode 7.
In previous versions of Xcode 6 or below, if I needed to add my pngs, jpgs to a project then I would do Xcode -> File -> Add files to Project -> select a folder where I had all my images in and add that. I was then able to use those images using code
NSString* headerStr =[NSString stringWithFormat:#"button_black.png"];
UIImage *myImg = [UIImage imageNamed:headerStr];
NSLog(#"myImg: %# ...", myImg);
Now check this out, if I try to add my pics folder in Xcode 7 it shows up blue. Why is it blue? If I try the code above then nslog displays
myImg: null ...
I mean what is going on? It never displayed any of the images I added.
Just for the heck of it I deleted that blue folder and created a new folder in my project by doing right click -> New group and then added all the pics to it and then it works. Is this a monster bug with this great Xcode 7?
Because you are adding your folder as reference thats why its shown in blue.
Delete the "pics2" folder. And try to add the folder again inside the project and select below options.
when I load my application it shows a warning message that
"Could not load the "" image referenced from a nib in the bundle with
identifier "
I searched and confirmed all my images. But it still shows that warning.
Select your image(s) in Project Navigator.
Open the File Inspector.
Make sure you have the target selected.
I had the same issue when I Refactor to Storyboard. Apparently the Asset catalog does not transfer the image reference. To fix, see below:
You would notice that your ImageViews is empty from reference.
1 - Click on the ImageView
2 Go to the Utilities bar where you would see you asset image is unknown
3 - Change it back to you image asset
This should fix your error. Hope this helps!
There might be many reasons of this error. To fix this issue you can just follow below given step:
Go to product menu of the Xcode, select clean.
If still you are getting the error, then remove the images from your project and again add the images to your project.
while adding image into the project, make sure that you have selected the Project name inside the "Add to targets". And also enable the "Copy items if needed".
Please Refer below image for better understanding:
Just select the image in Xcode and in right side, File inspector, under 'Target Membership' make sure your project is selected.
Another thing you can do is delete and re insert your image and make sure 'Copy items if needed' is selected and 'Add to targets' your project is selected.
Click on the image file in your Xcode navigator.
Once selected, go to the right side bar (of XCODE) which is
utilities and under file inspector, scroll to target membership and
select your project target file.
Then build and run the project again.
Xcode9 beta2 release note:
Jpeg assets in asset catalogs are not found on iOS 10 or earlier for apps built with Xcode 9. APIcalls for accessing the image such as UIImage.imageNamed: return nil. (32524123)
Workaround: Use png resources or limit app testing to devices running iOS 11 or later.
Xcode9 beta3 release note:
Jpeg assets in asset catalogs are found on iOS 10 or earlier for apps built with Xcode 9.(32524123)
For those that are getting this error while developing a cocoapod
I was trying to use an image from my pod's bundle, thats inside a .xcassets file, in the storyboard. It would show fine in the storyboard but when i ran the app it would crash saying it cant find the resource.
I changed my podspec to include s.resources as well as s.resource_bundles
s.resource_bundles = {
'SDKRes' => ['SDK/Assets/*']
}
s.resources = ['SDK/Assets/*.{xcassets}']
Then it was able to load the resource properly from the storyboard
You can try opening your storyboard or nib as Source Code and then "Find" the image name in it, see if it exists but already invalid in your project, probably you have deleted or changed its name, and now it doesn't seem valid.
I have just updated to XCode 9 and it started giving me this issue. I created a new Image Set in the Assets section and added the images I wanted to this, then re-added them to my tab bar images with custom names and it worked fine. Hope this helps!
PROBLEM
This happened to me seemingly out of the blue on a tab bar controller with icons for each tab. The storyboard was still showing my image icons and the assets existed with the expected names.
MY FIX
Select the tab bar icons in their respective view controller and reassign the image like you did the first time.
This happened to me as well. I was doing everything right when adding the image but for some reason it was not working. I had to click on the image again once added, and then on the right toolbar under "Target Membership" I noticed my project was not selected even though I was selecting it when adding the image. I selected it here and everything worked fine.
I got the same error message (in XCode 8), even though the app ran fine (in the simulator and on the device).
I found the problem: In my storyboard, using the document outline pane, I clicked through every single UIImage, and looking at the attributes inspector for each UIImage - in the Image View section - found that one UIImage had a blank file name (instead of the .png file name containing the image). Reselecting the .png file name from the dropdown box fixed the error message.
I have fetching same issue in xcode 9.
just tick on target membership
I pulled my hair out over this issue for hours and none of the solutions in this thread worked. The problem, in the end, was that the Xcode project files were stored on a Google Drive file stream. As soon as I moved it to the local drive or iCloud it worked fine.
My case was a bit different. I was using an old IBDesignable element which had some property of setting an image directly from the storyboard. Since that element was old, hidden and unused the images it had were not present in my assets folder.
Now Xcode won't be able to search this image since it is not in the project anymore. But if you search in the finder, inside your project, you'll find the XIB/Storyboard in which it is mentioned. From there you can find it manually by opening that XIB or Storyboard as source code and search. Once found either replace them with a new image or remove the unused element.
Look into storyboard file you'll see a question mark icon on any of the imageView (as shown in screenshot below) or UIButton image.
Just correct it and the warning will be gone.
Hope this helps
My guess is that you have an image in the Project Setting->Build Phases->Copy Bundle Resources which loses its reference and appears in Red text color. Remove this image from there and re-add.
This happens often due to relocate the image file after adding into project where image was added as a reference instead of a copy.
May be this can fix your issue.
Urughhh. I tried to fix this with all the above solutions, but nothing worked. What finally worked was:
Delete image from your project and select Move to Trash
Clean project
Close and restart XCode
Rename your image filename so something other than the previous name
Add new image to your project
I was facing the same problem, I solve it by deleting folder and create again and past all images then add reference again.
Based on what #hstdt posted above, it made me think I should check that my image is a filetype that doesn't have any bugs related to it. (https://stackoverflow.com/a/44558948/6804257)
I was using a .gif. I got rid of that image and instead used a .png. Now it works.
Had the same issue and none of these answers worked for me. Instead I restarted the mac and iPhone I was working with and then everything started to work fine again. 🤷♂️
My case is difference. I have more one assets folder. So I added to the wrong one.
Just remove and add to the right.
In my case,removing and adding the assets folder from the target fixed the issue.
Xib sets a wrong name for folder reference images. For example I have the folder like Menu->icon.png. Xib sets the "icon" name for the image. It should be "Menu/icon". So do no set images in xibs if you use a folder reference images.
(Xcode6, Build for iOS7.1, iPhone 4S, Swift)
Images are showing in the simulator, but not on the device. I've been fiddling and hacking away, trying to find the magic formula, but no luck. Here are my efforts to date:
Filename: abc#2x.png, abc.png.
Dragging an imageview onto storyboard and specifying file name via "image" drop-down menu in "Attributes Inspector."
All characters in file names are lower case.
Dragged and dropped files into images.xcassets folder
Verified that images.xcassets the "Copy Bundle Resources" section in "Build Settings"
No luck. Deleted files. Re-added using the "+" button at the lower left, and selected "Add files to myProject"
Checked "Copy items if needed."
Checked "Create Groups"
Verified that files were in the "Copy Bundle Resources" section in "Build Settings"
No luck. Deleted files
Re-added using the "+" button at the lower left, and selected "Add files to myProject"
Checked "Copy items if needed."
Selected "Create Folder References" radio button
Verified that files were in the "Copy Bundle Resources" section in "Build Settings"
No luck. Deleted files
Went into the GIMP and changed file format to .jpg
Repeated steps above with the .jpg file.
Dragged new imageview into the view controller, and set the image for this container using the drop-down menu.
Still no luck
Deleted app from phone several times to allow for a clean install.
Still no luck.
Project -> "Clean"
Project -> "Build"
Restarted Xcode
Still no luck.
Any ideas?
If anyone needs me, just look for the guy banging his head on his desk. :/
Your image is taking some other image reference also, Change the image name with any another name then you try with latest one.
abc.png to a.png
abc#2x.png to a#2x.png
I am sure it will solve your problem.
I got it working, albeit not the way that I wanted it to. I dispensed with the storyboard approach, and just set the background with code.
For posterity:
I. In storyBoard, delete the reference to the image in the Attributes Inspector. There must be some bug in there. It's not working, and it will break the code below.
II. Create an IBOutlet from the Image View to your controller. You have to do that wire ctrl+drag and hold thing. You should end up with something like this:
#IBOutlet var cheese : UIImageView = nil
III. In your viewDidLoad() routine, set the image programmatically, like so:
override func viewDidLoad() {
super.viewDidLoad()
self.cheese.image = UIImage(named: "cabotClothbound.jpg")
}
Of course, you have to make sure that all the stuff in the original question is done: make sure that your case is consistent, be certain that the files are added to your build, etc.
The .jpg file which was dragged n' dropped into the Images.xcassets is the one that worked.
I had the same issue but solved it. The image (in fact, icon) shouldn't be in the Reosurces.bundle, but in the Assets.xcassets.
I am pretty new to iOS and Xcode.
I tried to load an image with
[UIImage imageNamed:#"imageName.png/jpg and so on"];
but it only returns nil. The image should be in my project bundle, considering the fact that I can choose it from drag and drop menus in the InterfaceBuilder and it was added to Xcode via the "Add files to "projectname"..." menu.
It makes no difference whether I use .png or .jpg images, the result stays the same: they work via IB but not if I try to run the imageNamed method myself.
There are only a few reasons why an image would come back nil with imageNamed:
The image is not in your bundle. Make sure the image is actually in your project. Make sure the target is checked by clicking on the file and selecting the target it belongs to.
You have the image name spelled incorrectly or a problem with the extension.
You are using a retina display but do not have an #2x image. Try changing your simulator to retina and see if it shows up.
If you are using an asset catalog make sure you have the correct devices selected in the attribute inspector.
Some tips:
If you are testing using simulator delete the app off of your simulator and clean your project, then re-run. If it still shows up it should show up on your phone (if it doesn't it's probably an issue with the case of the filename or the #2x version).
If you are testing on your phone and it doesn't show up, make sure you are using the same version of the simulator (if you have an iPhone 4/4s make sure to use the 4/4s simulator with retina).
One last thing according to this post: JPG image doesn't load with UIImage imageNamed There is some issue with certain JPG types working with imageNamed and no extension. IMO, you should be using PNGs anyway since iOS compresses them for you, unless you just have to use JPG.
Re Mike Weller's comment. The checkbox is ....
If you verified all of the above and are finding that your UIImage(named: "myImage") returns nil from code inside of a dynamic framework you are building, then you have to change the code to:
UIImage(named: "myImage", in: Bundle(identifier: "com.myframework.name"), compatibleWith: nil)
This should retrieve the asset from CXAssets correctly.
In my case, the PNG was malformed.
For some reason Xcode preview shown it correctly, but when I tried loading it with UIImage, it returned nil.
I just had this issue for jpg files named on disk "file.jpg"
I was trying to load without the extension, just #"file". While this works fine for pngs, it does not for jpg. Once I used #"file.jpg", it worked!
Swift 5
If you get UIImage nil in dynamic framework, you should set image with bundle identifier.
You can create an extension to Bundle like this;
Create an extension;
extension Bundle {
public static let myFramework = Bundle(identifier: "com.myFramework.bundle")
}
Then you can use like this;
UIImage(named: "myImageName", in: Bundle.myFramework, compatibleWith: nil)
Or
You can use like this;
UIImage(named: "myImageName", in: Bundle(for: type(of: self)), compatibleWith: nil)
I think the first one is more useful because it's more readable than second one.
Try re-exporting your image.
I had a similar problem, UIImage imageNamed was returning nil and none of these answers fixed my problem.
I found out that it was actually something wrong with the png file. I opened the file in GIMP image editor, saved it as a new file, exported it again as png and magically it started working.
I didn't change anything in code at all so there was definitely something wrong with the actual image file.
try
[UIImage imageNamed:#"imageName.png"];
instead (with an extension)
I had the same problem: #"photo.jpg" resulted in 'nil' UIImage.
Changing to the "actual" filespec, #"photo.JPG" works fine!
I hadn't realized there was case-sensitivity there! VERY non-intuitive.
i had a similar issue, finally the cleanup fixed it: the image showed up in the simulator, but id did not show up when running the app on the iPhone.
What I did:
1) deleted the app from the iPhone
2) performed Product/Clean
after that the bug was fixed and the image showed up!
Try to use UIImage(contentsOfFile:) instead of imageNamed. It worked for me with downloaded images.
Check that file has no space at the end.
The name like name #2x.png will fail loading, but name#2x.png is fine
Does the image work on the simulator but not on the device?
If so, in this scenario it is always to do with the case of the name. The device requires exact case and the simulator is not so fussy if I remember correctly.
e.g. for an image named image.png
[UIImage imageNamed:#"Image"];
would work on the simulator but not on the device...
Make sure you have the image for the DEVICE you are using in your .xcassets file. An image flagged for iPad won't show up on the phone (or the simulated phone).
In addition to #Inturbidus's answer:
For those who came here working on Application Extensions:
The image you are working with should belongs to both targets - hosted app and extension.
In other case you'll always getting nil trying to access it from within the extension's code.
For Xcode 6.4, click on Images.xcassets and check whether there are entries for each image that you called. You may right-click on the image and select "Show in Finder" to check if the images are the correct ones added.
Make sure the Attributes Inspector name field of the image matches exactly the name you're using. In my case the image was part of a folder and so the image name was "folder/name". Using this long name solved the problem. XCode 7.3.1
In my case, using a name with accented characters proved to be a poor idea. I changed Astéroïdes to Asteroids and it worked fine.
In my case problem was with image name in asset catalog.
For example if you have image with name "TEst" and change name to "Test", changes won't be indexed. If your teammate will pull commit with this changes, image in his asset catalog will have previous name "TEst".
Very small chance to catch this situation but it's possible.
I had multiple .xcassets in my projects and 2 had duplicate name of images. So it was not loading the image in my case.