We are devloping a Drawing app. In that when we draw crossed lines ,the intersection point clears the previously drawn pixels where both lines intersects eachother.We are using setneedsdisplayinrect to refresh the drawing data.
How to over come this issue?
tl;dr: You need to store the previous line segments and redraw them when draw in the same rectangle again.
We are using setneedsdisplayinrect to refresh the drawing data
That is a good thing. Can you see any side effects of doing that? If not, try passing the entire rectangle and see what happens. You will see that only the very last segment is drawn.
Now you know that you need to store and possibly redraw previous line segments (or just their image).
Naive approach
The first and simplest solution would be to store all the lines in an array and redraw them. You would notice that this will slow down your app a lot especially when after having drawn for a while. Also, it doesn't go very well with only drawing what you need
Only drawing lines inside the refreshed rectangle
You could speed up the above implementation by filtering all the lines in the array to only redraw those that intersect the refreshed rect. This could for example be done by getting the bounding box for the line segment (using CGPathGetBoundingBox(path)) and checking if it intersects the refreshed rectangle (using CGRectIntersectsRect(refreshRect, boundingBox)).
That would reduce some of the drawing but you would still end up with a very long array of lines and see performance problems after a while.
Rasterize old line segments
One good way of not having to store all previous lines is to draw them into a bitmap (a separate image context (see UIGraphicsBeginImageContextWithOptions(...))) draw that image before drawing the new line segment. However, that would almost double the drawing you would have to do so it should not be done for every frame.
One thing you could do is to store the last 100 line segments (or maybe the last 1000 or whatever your own performance investigation shows, you should investigate these things yourself) and draw the rest into an image. Every time you have a 100 new lines you add them to the image context – by first drawing the image and then drawing the new 100 line – and save that as the new image.
One other thing you could do is to take all the new lines and draw them to the image every time the user lifts their finger. This can work well in combination with the above suggestion.
Depending on the complexity of your app you may need one or more of these suggestions to keep your app responsive (which is very important for a drawing app) but investigate first and don't make your solution overly complex if you don't have to.
Related
I have stumbled upon an interesting problem and I am not sure how to solve it. I have a line graph on which data points are marked with circular dots. At the moment I am creating one CAShapeLayer for the line itself and also CAShapeLayer for each dot.
The line is being animated with the strokeEnd animation key path. And it is working. However, the slightly negative effect is that once I open the graph I see all the data points already drawn and then a line is being animated through them.
Ideally I would like to change this behaviour in such a way that at the beginning nothing is shown and as the line gets animated data points are being drawn once the line passes through them.
I was thinking about this problem for some time now and I cannot find an elegant way of solving it. It seems to me that there should be a fairly easy way of achieving what I want. Maybe I should create a compounded path (but then how do I specify that a line needs to be stroked whereas dots need to be filled?).
Could anyone please guide me in the right direction?
There are lots of ways to handle this.
Assuming that the X increments of your graph are constant, and you're using linear timing, you could simply divide the total animation time by the number of data-points, and calculate the times when you need to add points to the graph when the line progresses to that X position. Simply add dot shape layers to the parent view's layer at the appropriate time intervals.
You could also change your drawing method to add new line segments to your graph path one at a time, on a timer, and add dot shapes at the same time. That would give you a step-by-step animation rather than a smooth line drawing.
I am drawing many audio meters on a view and finding that drawRect can not keep up with the speed of the audio change. In practice only a very small part of the image changes at a time so I really only want to draw the incremental changes.
I have created a CGLayer and when the data changes I use CGContextBeginPath, CGContextMoveToPoint, CGContextAddLineToPoint and CGContextStrokePath to draw in the CGLayer.
In drawRect in the view I use CGContextDrawLayerAtPoint to display the layer.
When the data changes I draw just the difference by drawing a line over the top in the CGLayer. I had assumed it was like photoshop and the new data just draws over the old but I now believe that all the lines I have ever drawn remain present in the layer. Is that correct?
If so is there a way to remove lines from a CGLayer?
What exactly do you mean by 'audio meter' show some snapshots of your intended designs. Shows us some code...
These are my suggestions-
1) Yes the new data just draws on top of CGLayer unless you release it CGLayerRelease(layer)
2) CGContextStrokePath is an expensive operation. You may want to create a generic line stroke and store them in UIImage. Then reuse the UIImage everytime your datachanges.
3) Simplest solution: use UIProgressView if you just want to show audio levels.
I now believe that all the lines I have ever drawn remain present in the layer. Is that correct?
Yes.
If so is there a way to remove lines from a CGLayer?
No. There is not. You would create a new layer. Generally, you create a layer for what is drawn repeatedly.
Your drawing may be able to be simplified by drawing rects rather than paths.
For some audio meters, dividing the meter into multiple pieces may help (you could use a CGLayer here). Similarly, you may be able to just draw rectangles selectively and/or clip drawing, images, and/or layers.
In the Video Session 506 of Apples WWDC 2012 they showed a painting app which is made for high performance drawings (so the frame rate never gets below 30).
I tried to replicate the code but get stuck on multiple points.
What I am looking for is a basic drawing app (lines, Squares, Circles, bezier paths), which performs well even after hundreds of lines have been drawn.
The basic approach is to save the drawn lines (or circles bezierpaths etc) to an image after a certain numbers of them have been drawn, and then only refresh the new drawings, therefore not having to redraw all the already drawn lines.
But somehow I never get to a higher performance. How do I need to implement this? Do I need multiple layers? And how do I manage that not all layers in a view are redrawn, but only a certain sublayer?
If someone could provide me with a short example of a few lines drawn on an layer, then saving that layer to an image, an then drawing on top of that I would really appreciate it.
Thank you for any help to recreate the iPaint application, which is unfortunately not available for download from apple.
That is only half of the puzzle. The other half is to only refresh the minimum possible area of the view (via setNeedsDisplayInRect:). However, I have been through many different ways of drawing via Core Graphics. The caching is fine, but I don't use it anymore. I set the update rectangle as above, and then test each path before I stroke it (testing is fast, stroking is slow). If it is inside the update box, I stroke it, otherwise I ignore it.
I did not look at that session, but a traditional Quartz speedup has been to use CGLayers (not CALayers). You can think of a CGLayer as a cached drawing which may or may not be a bitmap (the system decides how best to cached it). If you have a backing bitmap context, you can use that as your "image" and draw the CGLayers into that (and then discard the layers) as you see fit. Read up on CGLayer (its in the Quartz documentation) and then see if this was what they talked about in that session.
I have been trying so much but have no solution find out yet. I have to implement the painting and erasing on iOS so I successfully implemented the painting logic using UIBezierPath. The problem is that for erasing, I implemented the same logic as for painting by using kCGBlendModeClear but the problem is that I cant redraw on the erased area and this is because in each pass in drawRect i have to stroke both the painting and erasing paths. So is there anyway that we can subtract erasing path from drawing path to get the resultant path and then stroke it. I am very new to Core Graphics and looking forward for your reply and comments. Or any other logic to implement the same. I can't use eraser as background color because my background is textured.
You don't need to stroke the path every time, in fact doing so is a huge performance hit. I guarantee if you try it on an iPad 3 you will be met with a nearly unresponsive screen after a few strokes. You only need to add and stroke the path once. After that, it will be stored as pixel data. So don't keep track of your strokes, just add them, stroke them, and get rid of them. Also look into using a CGLayer (you can draw to that outside the main loop, and only render it to your rect in the main loop so it saves lots of time).
These are the steps that I use, and I am doing the exact same thing (I use a CGPath instead of UIBezierPath, but the idea is the same):
1) In touches began, store the touch point and set the context to either erase or draw, depending on what the user has selected.
2) In touches moved, if the point is a certain arbitrary distance away from the last point, then move to the last point (CGContextMoveToPoint) and draw a line to the new point (CGContextAddLineToPoint) in my CGLayer. Calculate the rectangle that was changed (i.e. contains the two points) and call setNeedsDisplayInRect: with that rectangle.
3) In drawRect render the CGLayer into the current window context ( UIGraphicsGetCurrentContext() ).
On an iPad 3 (the one that everyone has the most trouble with due to its enormous pixel count) this process takes between 0.05 ms and 0.15ms per render (depending on how fast you swipe). There is one caveat though, if you don't take the proper precautions, the entire frame rectangle will be redrawn even if you only use setNeedsDisplayInRect: My hacky way to combat this (thanks to the dev forums) is described in my self answered question here, Otherwise, if your view takes a long time to draw the entire frame (mine took an unacceptable 150 ms) you will get a short stutter under certain conditions while the view buffer gets recreated.
EDIT With the new info from your comments, it seems that the answer to this question will benefit you -> Use a CoreGraphic Stroke as Alpha Mask in iPhone App
Hai here is the code for making painting, erasing, undo, redo, saving as picture. you can check sample code and implement this on your project.
Here
I'm working on yet another drawing app with canvas that is many times bigger than screen.
I need some advice/direction on how to that.
Basically what i want is to scroll around this big canvas, drawing only in visible region.
I was thinking of two approaches:
Have 64x64 (or whatever) "tiles" to draw on, and then on scroll just load new tiles.
Record all user strokes (points) and on scroll calculate which are in specified region, and draw them, using only screen-size canvas.
If this matters, i'm using cocos2d for prototype.
Forget the 2000x200 limitation, I have an open source project that draws 18000 x 18000 NASA images.
I suggest you break this task into two parts. First, scrolling. As was suggested by CodaFi, when you scroll you will provide CATiledLayers. Each of those will be a CGImageRef that you create - a sub image of your really huge canvas. You can then easily support zooming in and out.
The second part is interacting with the user to draw or otherwise effect the canvas. When the user stops scrolling, you then create an opaque UIView subclass, which you add as a subview to your main view, overlaying the view hosting the CATiledLayers. At the moment you need to show this view, you populate it with the proper information so it can draw that portion of your larger canvas properly (say a circle at this point of such and such a color, etc).
You would do your drawing using the drawRect: method of this overlay view. So as the user takes action that changes the view, you do a "setDisplayInRect:" as needed to force iOS to call your drawRect:.
When the user decides to scroll, you need to update your large canvas model with whatever changes the user has made, then remove the opaque overlay, and let the CATiledLayers draw the proper portions of the large image. This transition is probably the most tricky part of the process to avoid visual glitches.
Supposing you have a large array of object definitions used for your canvas. When you need to create a CGImageRef for a tile, you scan through it looking for overlap between the object's frame and the tile's frame, and only then draw those items that are required for that tile.
Many mobile devices don't support textures over 2048x2048. So I would recommend:
make your big surface out of large 2048x2048 tiles
draw only the visible part of the currently visible tile to the screen
you will need to draw up to 4 tiles per frame, in case the user has scrolled to a corner of four tiles, but make sure you don't draw anything extra if there is only one visible tile.
This is probably the most efficient way. 64x64 tiles are really too small, and will be inefficient since there will be a large repeated overhead for the "draw tile" calls.
There is a tiling example in Apples ScrollViewSuite Doesn't have anything to do with the drawing part but it might give you some ideas about how to manage the tile part of things.
You can use CATiledLayer.
See WWDC2010 session 104
But for cocos2d, it might not work.