I have installed Umbraco 4.0 after implementing some feature, i am getting some error,
Do we have any provision to repair Umbraco installation ? Please suggest.
This is very vague, could you maybe give us some more detail on the error you are receiving?
Also, did you install umbraco, then add a new feature and it broke ?
As a general rule of thumb when working with cms content, it is best to make a backup of both your database and file system when performing maintenance on cms installations to avoid possible data or content loss.
Umbraco by itself does not have a built in "repair" feature, however you could overwrite the files on disk with a fresh copy of umbraco 4, provided it is the same version. You will have to rebuild your site index when done.
Note: I say overwrite because you simply want to replace all the umbraco files on disk and preserve your old content files such as media etc, however if you have made any changes to the umbraco core, those changes will be lost by doing the overwrite.
Related
I'm very new to coding and building my first rails website.
I use a Mac laptop to edit when I'm not home and a windows desktop. Up until now I've been using Dropbox to store the files and uploading/downloading from there when required.
The last time I tried uploading from my Mac, it didn't copy many files at all and I was wondering what the best way to do this going forward would be?
I'd use a proper version control system, such as git or mercurial. So you'd upload your code to a central repository (github, for example) from your mac and get/fetch these latest updates on windows. And vice versa.
This might seem like an overly complicated solution to this problem, but you'll have to learn version control anyway. Might as well start now.
For a project I'd like to use an existing website as a base for a cordova app. My project setup looks as follows:
One Solution with two projects
A ASP.NET webservice project (with website aka html/js/css)
An tools for apache cordova project
I don't want to copy the html/js/css files from the website on every build. Instead, I thought I could get away with some kind of a link to the www-folder in the ASP.NET project. I tried several approaches:
Creating a filesystem link (tried 'mklink' with parameters /D and /J - /H is not working for directories
Editing the .jsproj file and add a tag to link to the other project's www-folder
The second approach didn't work at all. Just got some weird errors when trying to load the project again (saying something about file duplicates).
The first approach worked a little bit: It is working, when targeting the windows platform. It is NOT working, when targeting iOS.
When targeting iOS, everything is copied just fine to the platforms\ios folder (read, all the content of the linked www folder is copied to the platforms\ios\www folder). But it is not copied correctly to the remote build tool on Mac OS X! It really just copies the directory link as a file. Remotebuild then failes with a 'missing www directory in top level' message.
Any suggestions how to add a link so the content is copied (instead of the actual link)?
Is there a way to take detailed influence on the build process for specific platforms?
Is there a way to create a hardlink to a directory in windows? What are the drawbacks?
I'd really like to avoid copying the files on build (which would be simple enough with a prebuild script), because there's a high risk of loosing changes made while debugging.
I'm aware that setting a link is also not the best solution, since it has to be done per machine and can't be checked in to a version control system. So, if somebody knows of a better aproach to handle my scenario, let me know.
I work on the Tools for Apache Cordova in Visual Studio at Microsoft.
I'm sorry but VS-TAC does not support add as link. To prevent confusion we removed the option in update 3.
The best solution I can give you is to copy files from one project to another. Another user asked this question a week ago and came up with a hacky solution. Please see this for more information:
VS2015 typescript cordova add as a link
Sorry for the trouble and thank you for the feedback!
I have installed Visual Studio 2013 with Update 2 and installed Web Essentials.
I had thought this was going to make adding LESS to my views a piece of cake, but am missing something.
The editor is great, and I imagine that it is compiling to css on save...
But I don't know where the generated css is, and I don't have any clue as to how to get it reference in my view.
I've tried a lot of searching, but can't get through the web of links about installing this and the features of that.
Any help at all will be greatly appreciated.
Thanks!
When you add a .less file and save, the Web Essentials will compile and generate the .css and .min.css files. You will see an arrow in your solution explorer, or you can also confirm in your file system that the files are in the same folder.
Haven't used less with vs2013 but I have used sass and my guess would be the same. By default the generated css gets generated in the same directory as the source (as it seemed to me) but you can check via tools>options>web essentials and there should be a set of options for less compile on save, build and directory to name but a few.
If you right click on the solution there should be an option to create a web essentials settings file for the solution - these create and adds a json file of web essentials settings to the solution which means your settings are local to the solution which could be important if you are changing the output directory.
I have two PCs both with XE2. I thought that I had installed identically on both but have problems installing 3rd party packages on one while the other is just fine.
I want the same on both anyway. The easist would probably just to "migrate" the working set-up by moving in into my Dropbox folder. Can I do that? If so, how?
If not, can I (easilly) backup my registry settings on one machine and then import them on the other?
I suppose I could just sort out the problem on the one PC, but am not having much luck so far. I would rather invest the time in only having one Delphi setup. And since I am moving lots of other stuff to DropBox anyway ...
The tool for this is now built into Delphi XE8 and higher.
It's found here:
C:\Program Files (x86)\Embarcadero\Studio\20.0\bin\migrationtool.exe
Online documentation:
http://docwiki.embarcadero.com/RADStudio/Rio/en/Settings_Migration_Tool
Install CnPack wizards from http://www.cnpack.org
From the CnPack toolbar select IDE Config Backup/Restore (image below) and save this file somewhere safe
Copy the components to the second delphi machine . Keep the exact same directory structure.
I store my components as follows this helps backing up, moving etc., but you can use your own structure
D:\components_bds\DCU
D:\components_bds\BPL
D:\components_bds\ComponentsThemselves
Use the restore config file from CnPack to restore your components on the new machine
This is also useful if your testing components that you plan to remove later and keeping a backup of your installation incase something goes wrong you can save time with new delphi installation if hard drive dies. Keep a copy on flashdrive or somewhere safe
You may compare/diff the config file created by cnPack using a tool like Beyond Compare and see what the differences are to find out why third party components give problems on one of the machines. It may be a Delphi registry/installation problem or a problem in the paths of the thirdparty components. Components need to be installed in an order perhaps it did not find the needed dcu or dll it depends on.
I don't know of any way to do so with DropBox. Here's an old post I made (related to Delphi 7, but with correction of registry keys still applicable) in the CodeGear newsgroups; hopefully it will help.
(It probably goes without saying, but back up the existing registry settings on the destination machine before starting by using RegEdit and exporting them, just in case. You'll at least be able to get back to the point you're at now if something goes wrong by deleting the imported entries and then importing the saved ones.)
You can't, without some difficulty anyway. (Especially if you have
third party components installed, as they may have placed files in the
%SYSTEM% folder you may not know about.)
You may be able to (for going from the old computer to the new
computer running the same exact version of Windows!) by exporting the
registry keys under HKCU\Software\Embarcadero and
HKLM\Software\Embarcadero from the old machine, and then after
installing Delphi on the new machine (in the exact same folder
location) importing that registry file.
Many of the compiler, linker, and other settings are configured on a
per-project basis, and should transfer over when you move your source
code to the new machine.
Third-party components are a problem, as I mentioned above. You may be
able to get away with using the registry export/import if you copy
each third-party component set from the old computer into exactly
the same location on the new machine before importing the registry
file. You'll probably have to track down some .BPL files that end up
in the $(BDS)\Bin and possibly other folders under the $(BDS)
tree; the IDE will tell you about missing stuff when you try and start
it. Make sure you answer "Yes " when asked if you want to try and load
it again next time!
Most of my development is hobby stuff or wannabe releases. Instead of dying trying to move my XE2 Pro from my Dell Inspiron N7110 Win 7 machine to my new Win 10 SSD machine, I'm seriously thinking of switching to Lazarus. I've used Lazarus 2.x with Indy 10, ZeosLib, and Firebird and successfully created a working distributed internet system. I also created Lazarus version of my XE2 Blackjack program. When compared to XE2, Lazarus (IMO) has only two weakness and neither are deal breakers for me. BTW, I have successfully duplicated Lazarus (with all installed components) from one machine to another simply by copying and pasting the Lazarus directory and it works. Try that with Delphi.
Sam
Ok, please bear with my noob question here.
I'm doing the simple task of making an update to my mvc application, compiling it and then moving in onto the production server.
I just wan't to know the best way to upload the compiled files. I have a single application pool, use ftp to upload the new application files and the site points to a single directory.
If I update just one view then which
files do I upload after compiling?
Is there a way to keep the site running
while I upload new code/views?
Where can I go to find out this
information?
Generally, you can update views without needing to re-cycle your web application. You would just want to replace the old version of the file with the new version, which can be done with a simple X-Copy command.
If there are code changes, then you will need to upate the web project DLL, which requires the app to recycle. This may or may not be a huge disruption, but it does mean that users may have their session interrupted, and lose some state.
Now, the question of how you could go about doing this is a little more complex. You can write a deployment process into your build scripts, which may be the easiest approach. The trick here, though, is that if you want to only include files that have changed, this can be a little trickier using vanilla NAnt or MSBuild tasks. You may also want to look at the WebDeploy tool from the IIS team. I've not used it much myself, but it is designed specifically to deploy web projects.
You may also want to hit google for some commercial deployment tools if none of the options so far seem to work for you.