I have a job in Jenkins that installs and configures a program after the build.
The problem I have now is that it is dependent on that both server and Client have been built.
Earlier they were built in a specific order, so I could trigger my job on the last built.
From now on I cannot know which one is built first so I need something else to trigger my installation.
My first thought is to have the build jobs creating a file and name it depending on if the other job already have created a file or not. But I thought I should ask here first, as I think it should be possible to do this easier and less error prone...
You can try using Join Plugin which will trigger a job when all the immediate downstream jobs have completed. You may need to then configure one parent job which will trigger the downstream jobs.
Related
I have a Jenkins server on K8s (using Rancher).
Job Y is configured to run after job X (image is attached).
Job X runs successfully, but at its end, job Y is not triggered.
Both jobs are on the same Jenkins master.
This problem has never happened to me before, on our Jenkins on prem servers.
I have checked everything I could think of, including creating test jobs that basically do nothing, just in order to test if the triggering is working for other jobs on this master, it does not.
Checking the logs - job x is in the log (image is also attached), job Y is missing from the log completely.
I will mention that on another master on the same cluster, triggering is working. Any ideas?
check the trigger condition for job Y.
Below is the one way you can trigger jobs in Jenkins
Chain jobs together
Chain Jenkins job together using the “Build other projects” option in the “Post Build Actions” of a job. The downside to this is that it introduces a dependency between jobs. For example, I want to be able to run the database backup job without doing a deployment every time.
Parameterized Trigger Plugin
When you have the Parameterized Trigger Plugin installed:
Create a wrapper job for your sequential jobs
For each sequential job
Select Build->Add build step->Trigger/call builds on other projects
Enter the sequential job name
Check the ‘Block until the triggered projects finish their builds’ checkbox (this only appears when you have the Parameterized Trigger Plugin installed)
Now when you run the wrapper job, all the triggered jobs will be run in order and sequentially. You of course also have the option of using the parameters functionality of the plugin too.
Throttle Concurrent Builds Plugin
The docs for the Throttle Concurrent Builds Plugin seem to be a little lacking, but it works well. With it installed, a “Throttle Concurrent Builds” section shows up in the Jenkins config section (Jenkins -> Manage Jenkins -> Configure System). There, you create a “Multi-Project Throttle Category”
Next, for each job that needs to be run sequentially, you
Check the ‘Throttle Concurrent Builds’ check box
Select the ‘Throttle this project as part of one or more categories’ radio button
Check the checkbox of the “Multi-Project Throttle Category” you created above
Save
Finally, you create a wrapper job that triggers all your to-be-run-sequentially jobs and when you run it, you should see your jobs running sequentially and in order.
Although a fairly complex option, this approach also allows you to run some jobs sequentially and others in parallel. For example, your wrapper job can run jobs A and B sequentially and jobs C and D sequentially, but trigger A and C in parallel. You can also combine this plugin with the Parameterized Trigger Plugin for maximum flexibility.
Join Plugin
Although I haven’t used the Join Plugin myself, it seems worth mentioning. Its docs state that
This plugin allows a job to be run after all the immediate downstream jobs have completed. In this way, the execution can branch out and perform many steps in parallel, and then run a final aggregation step just once after all the parallel work is finished.
That’s it. Several options for running Jenkins jobs in parallel. Choose the one that best suits your needs…
The scenarios is like:
Initially we scheduled 3 jobs in jenkins named like core, api-simulator and ui-sumilator. core is main build and triggered build once in week. api-simulator and ui-simulator are dependent. Once core is executed, it triggered other both jobs. So we can say core is parent of other two.
Somehow, someone changed the build triggered rule for core job and set it to 3 times in everyhour. So it executed so many task for core job. Meanwhile it triggered job for other two also.
To stop all those executions, I disabled all 3 jobs.
But now we are facing issue like when we manually click on build now, it starts building but eveytime it generated next task also. If we keep it running, it will generate new schedule one by one continuously.
Even I created new job for same repository and tried but facing same issue.
screenshot of execution
Can anyone have an idea how to stop that auto triggered schedule task or remove all those task?
Seems to be, that you've configured triggering your downstream jobs from main job and at the same time in your child jobs you've configured main job as upstream job.
So, re-check your configuration, and if that - you need to disable upstream job in child jobs.
Thanks #biruk1230 for your answer.
It has been resolved by just done the minor configuration change in Jenkins. I updated Branches to build value to "master". It was "*/master" previously.
You can view from Reference link
i am new to Jenkins , i need to execute one job that run's another multiple jobs in parallel were it should not stop even if one job fails.
i am not sure how to achieve it. After googling i can achieve by 3 ways Multi-Job plugin , Pipeline multiple Jenkins jobs , Build after other projects , Build Flow Plugin.
can any body please provide me the correct way.
Update : i am trying to achieve this using the pipeline plugin , can any body suggest me were it was correct choice ?..Please suggest!..
We use the Parameterized Trigger Plugin to do this.
In your build configuration add a Trigger/call builds on other projects build step. Add the names of the builds you want to trigger as a comma separated list and make sure that the Block until triggered projects finish their builds box is unchecked. Your build will trigger each of the listed builds, however note that your parent build won't wait for them to finish it will just trigger them and then perform the rest of it's buildsteps so if you have buildsteps.
If you do want to wait then check the block until triggered builds finish box, but set the options for when to fail the build, build step or mark the build as unstable appropriately.
If you need to pass parameters to the jobs you can add parameters using this plugin. If your downstream jobs need different parameters for different jobs you can click the add trigger button which adds another project to build where you can specify different options.
If these other jobs are follow up jobs to the current job and you don't need to wait for them to finish you can also achieve what you want to do by using the post build action build other projects, but again this occurs after the current job and you won't be able to use the results.
can any body please provide me the correct way.
I wouldn't approach using Jenkins with a "one correct way" mentality. Often times the requirements of your build will dictate which method or plugin you use in your build configurations.
The job can start other jobs via the jenkins api.
updated Answer : i used pipeline plugin to achieve my task and tuffwer was right to if u have paramaterized trigger plugin!..
I've noticed that there seems to be a build queue limit of one in Jenkins. When I trigger a lot of builds it seems to only place a max of one build in the build queue. Is there a way to remove this limit so there can be more then one build in the build queue?
This is intended behaviour:
Normally, your jobs will depend on some input (from SCM, or from some upstream jobs)
If your slave capacity is too low to catch up with each and every build, then you'd normally want to test/build/... only the very latest "item".
This is the default behaviour. Without that, there'd be a risk that the build queue grows indefinitely.
On top of that, Jenkins does not track the properties of normal build requests -- they all look the same, and Jenkins can not (for example) separate different SCM states that existed at different triggering times.
This is however exactly the point that gives you a workaround: parameterize your jobs, and then use for example the Trigger parameterized build on other projects post-build action to trigger those. Then Jenkins will queue each build request individually -- and inside your job, you can use the parameter to find out what exactly has to be done.
Jenkins will squash queued parameterized builds that have identical parameter values (thanks to user "atline" for checking).
Using Jenkins, I am running 2 builds (Linux+Windows) and one Doxygen job
At the moment, I am using 3 separate SCM polling triggers pointing to the same source code
How can I use a single trigger for all three jobs provided that I still want to get separate statuses
For the record; the underlying SCM is Git
Off the top of my head, some solutions which might do what you are looking for:
Instead of setting an SCM trigger, use a post-receive hook in your repository, which can send a signal for Jenkins that there are new changes (see: https://wiki.jenkins-ci.org/display/JENKINS/Git+Plugin#GitPlugin-Pushnotificationfromrepository). This way Jenkins doesn't have to constantly poll the repository (multiple times for the different jobs), and the trigger would be faster, since there is no waiting for the next polling, but when there is a push, a build will be started.
Use an extra job, that would do nothing else, just have the SCM polling trigger, and start all three original jobs (without waiting for any of them to finish).
If the configuration is similar for all three jobs, you could consider creating a single project with a matrix configuration. Roughly what it does, is that you could have a variable for the build type, with values like linux, windows, doxygen. When the job is triggered, it would start multiple builds with all the possible values - of course you would have to set up the job in a way that the current parameter changes the build process according to what needs to be done. Actually I haven't had to use a matrix configuration yet, so my example may be not the best, but you can probably find lots of examples on the Jenkins wiki, if you think this is a good direction.