I'm using the iPhone library for MeCab found at https://github.com/FLCLjp/iPhone-libmecab . I'm having some trouble getting it to tokenize all possible words. Specifically, I cannot tokenize "吉本興業" into two pieces "吉本" and "興業". Are there any options that I could use to fix this? The iPhone library does not expose anything, but it uses C++ underneath the objective-c wrapper. I assume there must be some sort of setting I could change to give more fine-grained control, but I have no idea where to start.
By the way, if anyone wants to tag this 'mecab' that would probably be appropriate. I'm not allowed to create new tags yet.
UPDATE: The iOS library is calling mecab_sparse_tonode2() defined in libmecab.cpp. If anyone could point me to some English documentation on that file it might be enough.
There is nothing iOS-specific in this. The dictionary you are using with mecab (probably ipadic) contains an entry for the company name 吉本興業. Although both parts of the name are listed as separate nouns as well, mecab has a strong preference to tag the compound name as one word.
Mecab lacks a feature that allows the user to choose whether or not compounds should be split into parts. Note that such a feature is generally hard to implement because not everyone agrees on which compounds can be split and which ones can't. E.g. is 容疑者 a compound made up of 容疑 and 者? From a purely morphological point of view perhaps yes, but for most practical applications probably no.
If you have a list of compounds you'd like to get segmented, a quick fix is to create a user dictionary for the parts they consist of, and make mecab use this in addition to the main dictionary.
There is Japanese documentation on how to do this here. For your particular example, it would involve the steps below.
Make a user dictionary with two entries, one for 吉本 and one for 興業:
吉本,,,100,名詞,固有名詞,人名,名,*,*,よしもと,ヨシモト,ヨシモト
興業,,,100,名詞,一般,*,*,*,*,こうぎょう,コウギョウ,コウギョウ
I suspect that both entries exist in the default dictionary already, but by adding them to a user dictionary and specifying a relatively low specificness indicator (I've used 100 for both -- the lower, the more likely to be split), you can get mecab to tend to prefer the parts over the whole.
Compile the user dictionary:
$> $MECAB/libexec/mecab/mecab-dict-index -d /usr/lib64/mecab/dic/ipadic -u mydic.dic -f utf-8 -t utf-8 ./mydic
You may have to adjust the command. The above assumes:
Mecab was installed from source in $MECAB. If you use mecab installed by a package manager, you might have difficulties finding the mecab-dict-index tool. Best install from source.
The default dictionary is in /usr/lib64/mecab/dict/ipadic. This is not part of the mecab package; it comes as a separate package (e.g. this) and you may have difficulties finding this, too.
mydic is the name of the user dictionary created in step 1. mydic.dic is the name of the compiled dictionary you'll get as output (needs not exist).
Both the system dictionary (-t option) and the user dictionary (-f option) are encoded in UTF-8. This may be wrong, in which case you'll get an error message later when you use mecab.
Modify the mecab configuration. In a system-wide installation, this is a file named /usr/lib64/mecab/dic/ipadic/dicrc or similar. In your case it may be located somewhere else. Add the following line to the end of the configuration file:
userdic = home/myhome/mydic.dic
Make sure the absolute path to the dictionary compiled above is correct.
If you then run mecab against your input, it will split the compound into its parts (I tested it, using mecab 0.994 on a Linux system).
A more thorough fix would be to get the source of the default dictionary and manually remove all compoun nouns you want to get split, then recompile the dictionary. As a general remark, using a CJK tokenizer for a serious application in production mode over a longer period of time usually involves a certain amount of dictionary maintenance (adding/removing entries) regularly.
Related
Let's say I have a rule like this.
foo(
name = "helloworld",
myarray = [
":bar",
"//path/to:qux",
],
)
In this case, myarray is static.
However, I want it to be given by cli, like
bazel run //:helloworld --myarray=":bar,//path/to:qux,:baz,:another"
How is this possible?
Thanks
To get exactly what you're asking for, Bazel would need to support LABEL_LIST in Starlark-defined command line flags, which are documented here:
https://docs.bazel.build/versions/2.1.0/skylark/lib/config.html
and here: https://docs.bazel.build/versions/2.1.0/skylark/config.html
Unfortunately that's not implemented at the moment.
If you don't actually need a list of labels (i.e., to create dependencies between targets), then maybe STRING_LIST will work for you.
If you do need a list of labels, and the different possible values are known, then you can use --define, config_setting(), and select():
https://docs.bazel.build/versions/2.1.0/configurable-attributes.html
The question is, what are you really after. Passing variable, array into the bazel build/run isn't really possible, well not as such and not (mostly) without (very likely unwanted) side effects. Aren't you perhaps really just looking into passing arguments directly to what is being run by the run? I.e. pass it to the executable itself, not bazel?
There are few ways you could sneak stuff in (you'd also in most cases need to come up with a syntax to pass data on CLI and unpack the array in a rule), but many come with relatively substantial price.
You can define your array in a bzl file and load it from where the rule uses it. You can then dump the bzl content rewriting your build/run configuration (also making it obvious, traceable) and load the bits from the rule (only affecting the rule loading and using the variable). E.g, BUILD file:
load(":myarray.bzl", "myarray")
foo(
name = "helloworld",
myarray = myarray,
],
)
And you can then call your build:
$ echo 'myarray=[":bar", "//path/to:qux", ":baz", ":another"]' > myarray.bzl
$ bazel run //:helloworld
Which you can of course put in a single wrapper script. If this really needs to be a bazel array, this one is probably the cleanest way to do that.
--workspace_status_command: you can collection information about your environment, add either or both of the resulting files (depending on whether the inputs are meant to invalidate the rule results or not, you could use volatile or stable status files) as a dependency of your rule and process the incoming file in the what is being executed by the rule (at which point one would wonder why not pass it to as its command line arguments directly). If using stable status file, also each other rule depending on it is invalidated by any change.
You can do similar thing by using --action_env. From within the executable/tool/script underpinning the rule, you can directly access defined environmental variable. However, this also means environment of each rule is affected (not just the one you're targeting); and again, why would it parse the information from environment and not accept arguments on the command line.
There is also --define, but you would not really get direct access it's value as much as you could select() a choice out of possible options.
I want to make a small "library" to be used by my future maxima scripts, but I am not quite sure on how to proceed (I use wxMaxima). Maxima's documentation covers the save(), load() and loadFile() functions, yet does not provide examples. Therefore, I am not sure whether I am using the proper/best way or not. My current solution, which is based on this post, stores my library in the *.lisp format.
As a simple example, let's say that my library defines the cosSin(x) function. I open a new session and define this function as
(%i0) cosSin(x) := cos(x) * sin(x);
I then save it to a lisp file located in the /tmp/ directory.
(%i1) save("/tmp/lib.lisp");
I then open a new instance of maxima and load the library
(%i0) loadfile("/tmp/lib.lisp");
The cosSin(x) is now defined and can be called
(%i1) cosSin(%pi/4)
(%o1) 1/2
However, I noticed that a substantial number of the libraries shipped with maxima are of *.mac format: the /usr/share/maxima/5.37.2/share/ directory contains 428 *.mac files and 516 *.lisp files. Is it a better format? How would I generate such files?
More generally, what are the different ways a library can be saved and loaded? What is the recommended approach?
Usually people put the functions they need in a file name something.mac and then load("something.mac"); loads the functions into Maxima.
A file can contain any number of functions. A file can load other files, so if you have somethingA.mac and somethingB.mac, then you can have another file that just says load("somethingA.mac"); load("somethingB.mac");.
One can also create Lisp files and load them too, but it is not required to write functions in Lisp.
Unless you are specifically interested in writing Lisp functions, my advice is to write your functions in the Maxima language and put them in a file, using an ordinary text editor. Also, I recommend that you don't use save to save the functions to a file as Lisp code; just type the functions into a file, as Maxima code, with a plain text editor.
Take a look at the files in share to get a feeling for how other people have gone about it. I am looking right now at share/contrib/ggf.mac and I see it has a lengthy comment header describing its purpose -- such comments are always a good idea.
For principiants, like me,
Menu Edit:configure:Startup commands
Copy all the functions you have verified in the first box (this will write your wxmaxima-init.mac in the location indicated below)
Restart Wxmaxima.
Now you can access the functions whitout any load() command
I have a script which saves some files at a given location. It works fine but when I send this code to someone else, he has to change the paths in the code. It's not comfortable for someone who does not know what is in that code and for me to explain every time where and how the code should be changed.
I want to get this path in a variable which will be taken from the configuration file. So it will be easier for everyone to change just this config file and nothing in my code. But I have never done this before and could not find any information on how I can do this in the internet.
PS: I do not have any code and I ask about an ultimate solution but it is really difficult to find something good in the internet about dxl, especially since I'm new with that. Maybe someone of you already does that or has an idea how it could be done?
DXL has a perm to read the complete context of a file into a variable: string readFile (string) (or Buffer readFile (string))
you can split the output by \n and then use regular expressions to find all lines that match the pattern
^\s*([^;#].*)\s*=\s*(.*)\s*$
(i.e. key = value - where comment lines start with ; or #)
But in DOORS I prefer using DOORS modules as configuration modules. Object Heading can be the key, Object Text can be the value.
Hardcode the full name of the configuration module into your DXL file and the user can modify the behaviour of the application.
The advantage over a file is that you need not make assumptions on where the config file is to be stored on the file system.
It really depends on your situation. You are going to need to be a little more specific about what you mean by "they need to change the paths in the code". What are these paths to? Are they DOORS module paths, are they paths to local/network files, or are the something else entirely?
Like user3329561 said, you COULD use a DOORS module as a configuration file. I wouldn't recommend it though, simply because that is not what DOORS modules were designed for. DOORS is fully capable of reading system files in one line at a time as well as all at once, but I can't recommend that option either until I know what types of paths you want to load and why.
I suspect that there is a better solution for your problem that will present itself once more information is provided.
I had the same problem, I needed to specify the path of my configuration file used in my dxl script.
I solved this issue passing the directory path as a parameter to DOORS.exe as follow:
"...\DOORS\9.3\bin\doors.exe" -dxl "string myVar = \"Hello Word\"
then in my dxl script, the variable myVar is a global variable.
I'm planning to do a program with Lua that will first of all read specific files
and get information from those files. So my first question is whats the "my documents" path name? I have searched a lot of places, but I'm unable to find anything. My second question is how can I use the first four letters of a file name to see which one is the newest made?
Finding the files in "my documents" then find the newest created file and read it.
The reading part shouldn't be a problem, but navigating to "my documents" and finding the newest created file in a folder.
For your first question, depends how robust you want your script to be. You could use Lua's builtin os.getenv() to get a variety of environment vars related to user, such as USERNAME, USERPROFILE, HOMEDRIVE, HOMEPATH. Example:
username = os.getenv('USERNAME')
dir = 'C:\\users\\' .. username .. '\\Documents'
For the second question, there is no builtin mechanism in Windows to have the file creation or modification timestamp as part of the filename. You could read the creation or modification timestamp, via a C extension you create or using an existing Lua library like lfs. Or you could read the contents of a folder and parse the filenames if they were named according to the pattern you mention. Again there is nothing built into Lua to do this, you would either use os.execute() or lfs or, again, your own C extension module, or combinations of these.
i'm currently using File::Basename fileparse to separate out a file's directory, base file name and it's extension using something like this:
my($myfile_name,$mydirectory, $file_extension) = fileparse($$rhash_params{'storage_full_path_location'},'\..{1,4}');
But see that there's a variation where you can actually provide a array of suffixes to the function, the array would contains all the known file extension.
So i'm trying to find a safe way to do this as i've seen that i've got some strange file names to process, i.e. file.0f1.htm, etc.
Question:
Is there a list of commonly used
extension for Windows and Unix
systems? But in my case it's mainly
for Windows.
And is it safe to
assume that all file names in
Windows should have an extension
ending with three letter characters?
And if there's an even better way to do this, please share.
Thanks.
Updates:
So obviously i must be drunk to forgot about those other extension. :)
Thus i've updated the current regex to allow from 1-4chars.
In this case, how should i change my regex line to properly match it?
Or is it an even better idea to look for all those commonly used extension from google and put them into an array to be passed to the function instead? My users are usually either students or teachers.
1. Is there a list of commonly used extension for Windows and Unix
systems? But in my case it's mainly
for Windows.
Yes, loads, all over the internet: http://www.google.com/search?q=common+file+extensions
2. And is it safe to assume that all file names in Windows should have
an extension ending with three letter
characters?
No, it's perfectly possible to use '.c', '.java', etc in Windows.
There are several fault assumptions in your code:
files need not have extensions. For example most binary executables on Unix/Linux/... don't have an extension at all. They are simply calls "bash", "wget", "sed", "Xorg", ...
extensions need not be three characters long, as #Alnitak already told you: ".c", ".java", ".mpeg", ".jpeg", ".html" are all perfectly fine and rather wide-spread extensions
cutting at the last "." is probably saver, but can still fail for files with no extensions or with multiple (or multi-part) extensions such as ".tar.gz", "tar.bz2", which occur rather often in the Unix/Linux/...-World