So I have installed elasticsearch through brew:
$ brew install elasticsearch
Then when I run the elasticsearch server:
elasticsearch -f -D es.config=/usr/local/Cellar/elasticsearch/0.19.3/config/elasticsearch.yml
I get this error:
{0.20.4}: Setup Failed ...
- FailedToResolveConfigException[Failed to resolve config path [/usr/local/Cellar/elasticsearch/0.19.3/config/elasticsearch.yml], tried file path [/usr/local/Cellar/elasticsearch/0.19.3/config/elasticsearch.yml], path file [/usr/local/Cellar/elasticsearch/0.20.4/config/usr/local/Cellar/elasticsearch/0.19.3/config/elasticsearch.yml], and classpath]
How can I fix this? Any ideas och suggestions are welcome.
I did this and it had worked for me:
Get the package:
$ curl -k -L -o elasticsearch-0.20.2.tar.gz http://download.elasticsearch.org/elasticsearch/elasticsearch/elasticsearch-0.20.2.tar.gz
Unzipp:
$ tar -zxvf elasticsearch-0.20.2.tar.gz
Run the elasticsearch server:
./elasticsearch-0.20.2/bin/elasticsearch -f
try with
elasticsearch -f -Des.path.conf=/usr/local/Cellar/elasticsearch/0.19.3/config/
That's weird, my install asked me to run elasticsearch slightly different. I got it running with:
Install
$ brew update
$ brew install elasticsearch
Run Elasticsearch
$ elasticsearch --config=/usr/local/opt/elasticsearch/config/elasticsearch.yml
As #karmi said, brew info elasticsearch shows how to run elasticsearch on your system.
Things haven't been changed in 2021.
Homebrew stops distributing newer version of elasticsearch, and kibana, although you can still get outdated versions in homebrew-core.
It's beacause Homebrew defers to the OSI's open source licence definition. The new license used by elastic softwares is not compatible with it, and Homebrew rufuses to distribute them.
So, elastic begins to distribute these software with its own custom tap.
# tap maintained by elastic organization
# https://github.com/elastic/homebrew-tap
brew tap elastic/tap
brew install elastic/tap/elasticsearch-full
# brew install elastic/tap/kibina-full
# brew install elastic/tap/logstash-full
Related
I am following the docker installation tutorial in ubuntu: https://docs.docker.com/desktop/linux/install/ubuntu/
And when I try this step: sudo apt install ./docker-desktop-4.8.1-amd64.deb I am getting the next error: E: Unsupported file ./docker-desktop-4.8.1-amd64.deb given on commandline
Not sure what that means or if I am missing something.
E: Unsupported file ./docker-desktop-4.8.1-amd64.deb given on commandline
I also tried with:
curl https://desktop-stage.docker.com/linux/main/amd64/74134/docker-desktop.deb --output docker-desktop.deb
sudo apt install ./docker-desktop.deb
And got the error:
E: Invalid archive signature
E: Internal error, could not locate member control.tar{.zst,.lz4,.gz,.xz,.bz2,.lzma,}
E: Could not read meta data from /home/rodolfo/docker-desktop.deb
E: The package lists or status file could not be parsed or opened.
Any ideas?
According to official documentation, and the steps I followed to install docker in Ubuntu 22.04 LTS
Visit the following site https://docs.docker.com/engine/install/ubuntu/
Scroll down until you find the Install using the convenience script section.
You will find the following commands:
$ curl -fsSL https://get.docker.com -o get-docker.sh
$ DRY_RUN=1 sh ./get-docker.sh
the first command will install a shell script with the all needed commands and the other will run this shell script.
You can test the installation by running these commands
$ sudo docker --version
$ sudo docker info
If it looks fine, you now have docker in your machine.
Optional step is to download docker desktop for Ubuntu 22.04
https://docs.docker.com/desktop/linux/install/
MAKE SURE You already installed docker engine before installing docker desktop for Ubuntu
Try moving the DEB file to HOME folder or Change the directory in terminal to the folder where the file is downloaded
So I had the same problem and the solution was to go to the folder root that I downloaded the deb file in it wish is Downloads for me and I rerun the commend
My issue ended up being Ubuntu 22.04 was installed with wsl version 1.
wsl -l -v
NAME STATE VERSION
Ubuntu-22.04 Running 1
wsl --set-version Ubuntu-22.04 2
I've searched lots of related posts on here and other site but anything didn't solve my problem.
As mentioned on title I'm struggling to install docker on linux subsystem on window OS
I'm with win 10 home edition so I've already installed Docker tool box, and my wsl is version 2 with Ubuntu 18.04
I was following the instructions and everything was fine until I did:
~$ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
gpg: can't connect to the agent: IPC connect call failed
Is there anyone who had same difficulty but solved this problem?
Thank you in advance!
The issue is because of a real-time clock issue with the Glibc library under the WSL v1 setup. WSL v2 may fix this under the hood and you may not run into the issue in future.
Now you can fix Glibc manualy:
$ sudo add-apt-repository ppa:rafaeldtinoco/lp1871129
$ sudo apt update
$ sudo apt install libc6=2.31-0ubuntu8+lp1871129~1 -y
$ sudo apt-mark hold libc6
//Remove "-y" if needed on above step #3.
//And when asked, give "y" and hit enter.
The above set of commands will add the latest version of the Glibc library and put the stable library on hold, until needed to reenable.
You can track this issue https://github.com/microsoft/WSL/issues/5125
I'm trying to create docker machine host using the following command in fedora OS version 25.
docker-machine create -driver=virtualbox host01
I get below error while executing the command.
Error with pre-create check: "We support Virtualbox starting with version 5. Your VirtualBox install is \"WARNING:
The vboxdrv kernel module is not loaded.
Either there is no module available for the current kernel (4.10.12-200.fc25.x86_64) or it failed to load.
Please try load the kernel module by executing as root
dnf install akmod-VirtualBox kernel-devel-4.10.12-200.fc25.x86_64 akmods --kernels 4.10.12-200.fc25.x86_64 && systemctl restart systemd-modules-load.service
You will not be able to start VMs until this problem is fixed.\\n5.1.26r117224\".
Please upgrade at https://www.virtualbox.org"
I have already virtualbox latest version installed. Running the command suggested by
sudo dnf install akmod-VirtualBox kernel-devel-4.10.12-200.fc25.x86_64 akmods --kernels 4.10.12-200.fc25.x86_64 && systemctl restart systemd-modules-load.service
I got the below error
Last metadata expiration check: 0:48:35 ago on Thu Aug 17 22:38:47 2017.
Package akmods-0.5.6-7.fc25.noarch is already installed, skipping.
No package --kernels available.
No package 4.10.12-200.fc25.x86_64 available.
Any suggestions?
I also had this problem and for this I upgrade Virtual box to 5.2 using following commands. This link help me
sudo apt-get remove virtualbox virtualbox-5.1
sudo sh -c 'echo "deb http://download.virtualbox.org/virtualbox/debian xenial contrib" >> /etc/apt/sources.list.d/virtualbox.list'
wget -q https://www.virtualbox.org/download/oracle_vbox_2016.asc -O- | sudo apt-key add -
wget -q https://www.virtualbox.org/download/oracle_vbox.asc -O- | sudo apt-key add -
sudo apt-get update
sudo apt-get install virtualbox-5.2
Hope this helps.
For windows users, in 2022 such problem still exists. So for those who use last build (now it is virtualBox-6.1.32-149290-Win), try to use version that starts with prefix 5. But not all '5' versions work. For example, for me worked only version 5.2.42 while versions: 5.2.18, 5.2.20, 5.2.44 didn't work
Helped for win 11 x64
I need to install fleetctl and I found a tutorial that says to use
brew install fleetctl
The thing is, I don't have brew installed, and when I follow this tutorial here and type
which brew
afterwards, nothing happens. So, how do I get brew working? I'm using Ubuntu 13.10
Brew, or Homebrew, is a package manager for OS X. Therefore, it will not work on Ubuntu, which is a Debian flavored Linux.
Package managers means that someone has precompiled source code. It doesn't look like Ubuntu's package manager, apt-get, has a precompiled version.
However, the creators of fleetctl have a compiled version here:
https://github.com/coreos/fleet > Releases > fleet-v0.8.3-linux-amd64.tar.gz
So on your box:
Download it:
$ wget https://github.com/coreos/fleet/releases/download/v0.8.3/fleet-v0.8.3-linux-amd64.tar.gz
Untar it:
$ tar -xvf fleet-v0.8.3-linux-amd64.tar.gz
It's not installed yet, as you can see from which but it'll run:
$ which fleetctl
/usr/bin/which: no fleetctl in (/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/ec2-user/bin)
$ ./fleet-v0.8.3-linux-amd64/fleetctl
(Optional but recommended) Install it by moving to /usr/local/bin
$ sudo cp fleet-v0.8.3-linux-amd64/fleetctl /usr/local/bin
You can prove that it's installed and run it from any directory:
$ which fleetctl
/usr/local/bin/fleetctl
$ fleetctl
i tried installing Redis on osx 10.7 via homebrew in bash and I get the following error:
==> Downloading http://redis.googlecode.com/files/redis-2.6.9.tar.gz
Already downloaded: /Library/Caches/Homebrew/redis-2.6.9.tar.gz
==> make -C /private/tmp/redis-wQAX/redis-2.6.9/src CC=cc
Error: Permission denied - /usr/local/var/db
Redis is not installed from what i can tell.
$ ps -aux | grep redis
ps: No user named 'x'
I cannot find the solution and don't know who to ask! Please let me know if you have workaround or solution/suggestion to this. Thank you!
I am also using osx 10.7. I think you don't need to install Redis via homebrew. You can just follow the simple instructions in redis homepage:
in bash:
cd /usr/local/var/
ls
the directory 'db' is most likely missing, create it:
mkdir db
then run
brew install redis
check /usr/local/var/log
ls
most likely the directory 'log' is missing, create it
mkdir log
brew install redis