I am trying to set up a JQuery Mobile 1.3 site that uses a panel and a slider.
Problem is, that using the slider triggers the panel, which opens on a "swiperight" event, as I am moving the slider to the right. The slider will be for pagination, the panel for a menu.
Code here:
http://jsfiddle.net/kMARn/1/
Move the slider to the right and the panel will open.
I have tried using the .not() selector for the panel to not react on the slider:
$(document).not("#slider").on("swiperight", function(event, ui) {
$("#myPanel").panel("open");
});
But it won't work, the panel opens when i move the slider to the right. Tried a bunch of variants too, but I'm lost...
Any ideas?
Thanks!
A bit late to the party, but you can disable swipe-to-close by setting the data-swipe-close attribute to "false" on the panel div.
http://jquerymobile.com/demos/1.3.0-beta.1/docs/panels/options.html
In my case I used this simple code, without data-swipe-close = "false" in panel.
Keeping panel close with swipe right, outside of the slider.
$('#panel').find('#slider')
.on('slidestop',function(e,ui) {
var value = e.target.value;
//...operations with slider value...
})
.parent().on('swiperight',function(e,ui) {
e.stopPropagation(); //block panel close
})
From the 1.3.0b1 Docs for Swipe:
"Triggers when a horizontal drag of 30px or more (and less than 75px
vertically) occurs within 1 second duration"
This applies to and can be configured for swiperight too. You can make the slider small in length and this would ensure that both the slider event stop and the swipe are not triggered at the same time, yet that may not be practical for all scenarios.
What might be better is to bind the swipe right to a DIV or section of the page. By this, I mean if you have a 75 px div box on the left hand side of the display, and when a swipe event occurred within that div, it could trigger the menu.
I feel the logic here might be better controlled by a button, much like used in the Facebook App to display there slide out menu. In the Dolphin browser on Android, this type of event also triggers a bookmark menu, so if a page has a swiperight event and trigger it, I sometimes get both the event and the bookmark menu from the App. Annoying!
I did fork your jsfiddle and will play with it more (http://jsfiddle.net/Twisty/Hg2pw/). FYI, they have JQM 1.3.0b1 in their available frameworks so you don't have to link it in your HTML. If I find some more info, I will comment here.
The following solution is more a workaround. It should be relatively reliable though.
$(document).ready( function () {
var menu_available = true;
$(document).on("swiperight", function(event, ui) {
if (menu_available) $("#myPanel").panel("open");
});
$("#slider").on("slidestop", function( event, ui ) {
menu_available = false;
window.setTimeout(function() {menu_available= true;},250);
});
});
The variable menu_available is false for a 250 milliseconds right after the slide stops. The window.setTimeout block will reset the variable so that the menu is available again.
This is a stupid workaround, but jQuerys function event.stopEventPropagation(), which IMHO would be the correct way to go, didn't work.
Related
When you click on a JQuery UI slider that is disabled and the page has been scrolled down, the page goes back to the top.
This is happening because the slider widget is implemented with an anchor tag containing an Href of #.
This is my hack solution.
$(".ui-slider-disabled").on("click",
".ui-slider-handle",
function () {return false;});
It works well but, is there a native (API) way to stop this?
How about this (you may need to change the class, depending on how you set it up)
$(".ui-slider").click(function(e){
e.stopPropagation()
});
This is driving me a little crazy as I just can't get it to work :(!
I have jQuery tabs set-up as follows (all working) :
$(".tabs_area" ).tabs({
fx: { duration: 'slow', opacity: 'toggle' }
});
I then have a scroll to anchor focus mechanism (again works fine in terms of the function itself) :
$('.tabs_area li a').bind('click',function(event){
var $anchor = $(this);
$('html, body').stop().animate({
scrollTop: $($anchor.attr('href')).offset().top
}, 500,'easeInOutExpo');
event.preventDefault();
});
My problem is that sadly they won't work simultaneously. When I click the tab, it correctly displays the corresponding tab content BUT it doesn't scroll you to the start of this content. You have to click the tab again for it to then do the scroll to the content, which isn't good.
Sadly the reason I need is that I am using this on a mobile website, and when you click the tab, although it does actually change the content, it is bellow the tabs menu, and therefore below the visible area of the screen, hence why I want it to swap the content then scroll you down to this so you can see it, and of course with one click only.
So I think I need to combine the scroll functionality within the tabs set-up code... somehow... as a callback or something... but I just keep breaking it :(!!
Any help would be so much appreciated.
Thanks in advance,
TJ
Why don't you use the show option for jQuery Tabs?
Seems to do what you wish to do.
Check the solution
$(".tabs_area" ).tabs({
show: function(e,ui){
$('html, body').stop().animate({
scrollTop: $(ui.tab.getAttribute('href')).offset().top
}, 500,'easeInOutExpo');
}
});
I am using jQuery mobile and trying to show jQuery pop on page load. But when the page is loaded popup is not appearing in center, instead popup's TOP LEFT corner is appearing in center.
But as soon as browser window size gets change popup automatically shifts to center (Even if I press F12 for developers tool). And then all frequent calls to $('#popupBasic').popup("open"); make it to appear in center of the screen.
But first time top left corner of the popup box appearing in center.
try this: data-position-to="window".
this is the source
You may try repositioning the popup on pageshow:
$( '#popupLogin' ).popup( 'reposition', 'positionTo: window' );
I reckon what you are experiencing is down to the positioning happening prior the page is fully drawn by the browser. You can overcome this by repositioning the popup like this:
$(document).on('pageshow', '.selector', function(){
$('#popupBasic').popup('reposition', 'positionTo: window');
});
$(document).on("popupafteropen", function() {
$('#popup').popup('reposition', 'positionTo: window');
});
You can use the custom pop up events to reposition it after opening
I was getting the same error. You only want to show the popup after the page has been painted.
Adding your code to listen to the pageshow event instead of the pageinit event will probably fix your problem. It fixed it for me.
This is a very vague question.
A few items you should provide:
What browser are you testing on and what version?
What version of JQM?
Are there any custom CSS interacting with JQM?
As of JQM 1.2, Popup options available:
default: "origin"
Sets the element relative to which the popup will be centered. It has the following values:
"origin" When the popup opens, center over the coordinates passed to the open() call (see methods page).
"window" When the popup opens, center in the window.
jQuery selector When the popup opens, create a jQuery object based on the selector, and center over it. The selector is filtered for elements that are visible with ":visible". If the result is empty, the popup will be centered in the window.
Source
It worked for me when I set the width of popup div manually; try:
$("#popupBasic").css("width","200px");
I have a basic JQM page which displays a left side sliding menu when swiping (like the facebook mobile app). It worked fine until I started using scrollview (to properly keep the header fixed). The swipe event is not triggered when I swipe over my page content (it still works if I swipe on the header).
$('.ui-page-active').live("swiperight", function() {
if (!menuStatus) {
showMenu();
}
});
Does anyone has any idea on how to make it work?
Cheers!
I think you might find that the event is consumed in the scrollview control. You can override the javascript handler against that control to allow it to keep bubbling.
To override the function you can use this technique: Overriding a JavaScript function while referencing the original
Having a quick look at the file, it looks like this method could hold clues as to what you want:
_handleDragMove: function(e, ex, ey)
specifically:
var svdir = this.options.direction;
if (!this._directionLock)
I was using the version of scrollview shown here: http://jquerymobile.com/test/experiments/scrollview/scrollview-nested.html
I am using jQuery draggable/droppable to drag (divs) from one list to another. Both lists have a fixed number of list items, and the list items themselves and can either be empty or already contain a div.
I am dragging a div to a list item. If the list item already contains a div then I would like that div to be pushed down to the list item below it - so as to make way for the div I am dragging. I can do this with the "over" event in droppable. But I would like this to happen only after the user has paused there for a cetain period of time, say 0.5 second. How can I do this?
Also, if the user decides not to drop then I would like the displaced item to come back to its original position. Again, what would be the easiest of accomplishing that?
Thanks for your help
William
I just happen to be doing something similar. In my case, I am using the treeTable plugin. I want to expand a collapsed tree if it is hovered for some amount of time. Here is what I have so far. I just happen to be working on this today. Note the use of a timeout to delay the operation.
var timeout = null;
var clear = function() {
if (timeout) {
clearTimeout(timeout);
timeout = null;
}
}
$(".selector").droppable({
over: function(e, ui) {
if (! $(this).is("expanded")) {
clear();
timeout = setTimeout(function() {
$(this).expand();
timeout = null;
}, 1000);
}
}
, out: clear
, drop: function(e, ui) {
clear();
...
}
});
I'm still having a problem with this. After one branch gets expanded, the rows below it get pushed down to make room for the expanded branch. I haven't dropped yet and so I go hover over the first new element in the expanded branch. The problem is that this element does not get the hoverClass, the first element that got pushed down below the new branch gets it. It is like jquery doesn't figure out that it got moved down. I imagine that you are likely to encounter this problem given what you've described.
I was on jquery-1.4.2 but then I updated to jquery-1.6.4 to see if that would fix the problem. Both versions exhibit the same behavior. Also, I tested this in Chrome 14.0.835.202, Opera 11.52, Firefox 3.6.23 and IE7.0.5730.13. It happens the same way in all of them. So, either jquery has a bug or I've done something to cause this.
About your second question. I'm not sure I completely understand what you're going after. Are you looking for the