I'm getting this error when I run the cucumber tests. Everything seemed to be working fine the previous day but I can't figure out why it stopped working. I was trying to get capybara webkit working and I had changed a couple of files but I don't see why it should affect my tests. Any idea on how to fix this error I'm getting while running the cucumber tests?
Capybara::DriverNotFoundError: no driver called :rack was found, available drivers: :rack_test, :selenium, :webkit, :webkit_debug
You mentioned that you edited many files. Could it be that you didn't revert all the changes you made? I think Capybara would pick the 'rack_test' driver by default, and your system could not find the 'rack' driver.
Since you're doing Cucumber testing, you must have a file called 'env.rb' under the features/support folder. Make sure you don't force 'rack' as your Capybara driver, and your tests should run fine.
I am new Rails and trying to debug a project which has some failing unit tests. As I run 'rake test' it gives me lot of output on the console. I would like to know if there is some file which stores all this output which I can refer to. This will make it easier for me to search through the log. I come from the Eclipse world where Junit makes it very easy to run/debug unit tests. I have skimmed through the guide for testing, http://guides.rubyonrails.org/testing.html but still couldnt find any information about logging in it.
Try:
rake test testopts='-v' >mylog.txt
HTH.
When I run my integration tests individually using "ruby -Itest test/integration/mytest.rb", it works just fine.
When I try to run rake test:integration to run all my integration tests in one command, I have to wait a few seconds but I never get any output. No good result, no error.
If I run rake --trace test:integration, everything seems to be fine until the Execute test:integration (which does not provide any output).
Looks as though the integration folder was not found or was empty.
Any ideas?
Thanks
Christian
I've just spent 3 hours trying to figure this out, and get this: your test files must end with "_test.rb" otherwise they are skipped
I have a small test project that I'm using to test the waters for a much larger project. I am using rspec on rails for testing, but recently looked into Cucumber. It looks very nice, but I'm wondering if there's a way for cucumber to run my spec tests, or for rspec (autospec) to run my cucumber features. I've looked around extensively, but have yet to find a solid conclusion.
Thanks,
Mike
I've been experimenting with Cucumber as well. It supports autotest:
AUTOFEATURE=true autospec
That runs both the rspec & cucumber test suite continuously.
An easy way to do this would be to create a Rake task that invokes both tools, such as this minimal example:
desc 'Run rspec + cucumber'
task :build => [:spec, :features]
Then you can build both with:
rake build
Both RSpec and Cucumber come with some default tasks which work with Rails, but you can customize the tasks to suit your needs. There's more info on writing rake tasks here.
Depends on what you are looking for, but the best way to run cucumber tests with rspec is to use turnip, which uses exactly the same feature syntax as cucumber (the syntax is called gherkin), but allows you to use most of the functionality of rspec. https://github.com/jnicklas/turnip.
If you want to take things one step further, you can run your features from inside rspec _spec.rb files using a gem we created called rutabaga. https://github.com/simplybusiness/rutabaga
In both cases, all the tests can be run by executing rspec or bundle exec rspec as needed.
Whenever I run rspec tests for my Rails application it takes forever and a day of overhead before it actually starts running tests. Why is rspec so slow? Is there a way to speed up Rails' initial load or single out the part of my Rails app I need (e.g. ActiveRecord stuff only) so it doesn't load absolutely everything to run a few tests?
I definitely suggest checking out spork.
http://spork.rubyforge.org/
The railstutorial specifically addresses this, and gives a workaround to get spork running nicely in rails 3.0 (as of this moment, spork is not rails 3 ready out of the box). Of course, if you're not on rails 3.0, then you should be good to go.
The part of the tutorial showing how to get spork running in rails 3.0
http://railstutorial.org/chapters/static-pages#sec:spork
Checking when spork is rails 3.0 ready
http://www.railsplugins.org/plugins/440-spork
You should be able to to speed up your script/spec calls by running script/spec_server in a separate terminal window, then adding the additional -X parameter to your spec calls.
Why is rspec so slow? because it loads all the environement, loads fixtures and all that jazz.
Is there a way to speed up Rails' initial load you could try using mocks instead of relying on the database, this is actually correct for unit testing and will definitly speed up your unit tests. Additionnaly using the spec server as mentionned by #Scott Matthewman can help, same with the autotest from zentest mentionned by #Marc-Andre Lafortune
Is there a way to single out the part of my Rails app I need (e.g. ActiveRecord stuff only) so it doesn't load absolutely everything to run a few tests? what about this
rake test:recent
I am not sure how the rspec task integrate with this but you could definitely use the test:recent task as a template to do the same with rspec tests if the.
rake test:rspec:recent
doesn't exist yet
because it loads all the environement, loads fixtures and all that jazz.
The real culprit is if you run it using rake spec, it runs the db:test:prepare task.
This task drops your entire test database and re-creates it from scratch. This seems ridiculous to me, but that's what it does (the same thing happens when you run rake:test:units etc).
You can easily work around this using the spec application which rspec installs as part of the rspec gem.
Like this:
cd railsapp
spec spec # run all specs without rebuilding the whole damn database
spec spec/models # run model specs only
cd spec
spec controllers/user* # run specs for controllers that start with user
I think the "zen" experience you're looking for is to run spec_server and autospec in the background, with the result being near-instant tests when you save a file.
However, I'm having problems getting these two programs to communicate.
I found an explanation here:
I've noticed that autotest doesn't send commands to the spec_server.
Instead it reloads the entire Rails environment and your application's
plugins everytime it executes. This causes autotest to run
significantly slower than script server, because when you run the
script/spec command the specs are sent to the spec_server which
already has your Rails environment fired up and ready to go. If you
happen to install a new plugin or something like that, then you'll
have to restart the spec_server.
But, how do we fix this issue? I'm guessing it would involve downloading ZenTest and changing code for the autotest program, but don't have time to try it out right now.
Are you running this over Rails? If so, it's not RSpec's initialization that's slow, it's Rails'. Rails has to initialize the entire codebase and yours before running the specs. Well, it doesn't have to, but it does. RSpec runs pretty fast for me under my small non-rails projects.
Running tests can be really slow because the whole rails environment has to load (try script/console) and only then can all tests run. You should use autotest which keeps the environment loaded and will check which files you edit. When you edit and save a file, only the tests that depend on these will run automatically and quickly.
If you're using a Mac I recommend using Rspactor over autotest as it uses a lot fewer resources for polling changed files than autotest. There is both a full Cocoa version
RSpactor.app
or the gem version that I maintain at Github
sudo gem install pelle-rspactor
While these don't speed up individual rspec tests, they feel much faster as they auto run the affected spec's within a second of you hitting save.
As of rspec-rails-1.2.7, spec_server is deprecated in favor of the spork gem.
The main reason is that require takes forever on windows, for some reason.
Tips for speedup:
spork now works with windows, I believe.
You can try "faster_require" which caches locations:
http://github.com/rdp/faster_require
GL.
-rp
If you are on a Windows environment then there is probably little you can do as Rails seems to startup really slowly under Windows. I had the same experience on Windows and had to move my setup to a Linux VM to make it really zippy (I was also using autotest).