I hava two report in the this file C:\tomcat\webapps\vivicloud\vivitrend\src\main\jasperreports: main report "dailyOrderReport.jrxml" / second report "dailyOrderReportDetail2.jrxml"
Main report have a ${sequence} field. I want to click the main report ${sequence} field can transfer parameter and link to "dailyOrderReportDetail2".
In the sequence filed I config the hyperlink and detail is
Hyperlink Target :self
Hyperlink Type: ReportExecution
Link parameter :
Parameter Name Expression
_report "repo:dailyOrderReportDetail2"
sequence $F{sequence}
But can not to link to dailyOrderReportDetail2.
In what you are trying to do i think you should skip the "repo:" in front of your linked report. And check that the relative path to your second report dailyOrderReportDetail2.jrxml is correct.
Check the first answer here for a step by step mini tutorial on how to do it (using servlets), or see a similar approach on this blog.
Hope this helps you get in the right direction, or at least gives you some pointers.
If both report are already running in JasperReport Server then problem must be in relative path of second report.
just check relative path of the second report must be written in red color and give the full path like:-
"repo:/path of the second report "
I know this is late, but might help someone else in the future.
I'm guessing you mean kind of like a drill-down report. Make sure all the parameters are exactly the same in the second report that need to pass over from the first report.
NOTE: You will not use the .jrxml file of the "sub report". The second report needs to be actually published with input controls and all.
Click the field you want to be the hyperlink
Click hyperlink in properties tab
Link Target : Blank
Link Type : ReportExecution
Parameters (very important)
1. Parameter: _report
Expression: path of published report (not .jrxml)
2. parameter: your choice :
Expression: Whatever carries over
now when you publish this main report and you click on the hyperlink, it will run the second report with the parameters set.
Related
Looking to create a shipment on www.fedex.com
But fill out most of the fields using a query string at the end of a URL.
Seems like this might not be possible, but need help figuring out how to know whether it is or not.
My "Create Labels" page has a URL ending in -- ?method=doInitialize&utype=null ,
or else sometimes ...
-- ?method=doEntry&link=1&locale=en_US&urlparams=us&sType=F
so it seems promising. Just not sure how to access the names of the required fields (Contact name, Address 1 and 2, etc ) besides guess and check.
Thanks!
--------- Destination Section Parameters Found
The query string parameters for the destination contact field are, at the time this answer was written :
toData.addressData.contactName
toData.addressData.addressLine1
toData.addressData.addressLine2
toData.addressData.zipPostalCode
toData.addressData.city
toData.addressData.stateProvinceCode
toData.addressData.phoneNumber
psdData.mpsRowDataList[0].weight
Of course, they need to be appended to the original URL using valid query string syntax and URL encoding.
--------- How Were These Found ?
These were each found using the page inspector. I found that it is important to cut through the noise by zeroing in on the exact field where the data needs to be entered, and opening up the page inspector to that location.
Right click (Win) or control click (Mac) > "inspect"
This will bring up the following text in the inspector. By trial and error, I discovered that the "name" fields correspond to the working query string parameters.
The part we are looking for :
This corresponds to the query string parameter ...
toData.addressData.addressLine1
... originally listed above.
--------- Unsolved Parameters
It's a mystery why this same rule doesn't apply in the same way to other values in the page, like service type (e.g. "Priority Overnight") or package type (e.g. "FedEx Box"). The following, for example, do not fill as expected, even when using the exact same "name" field from the page inspector.
psdData.mpsRowDataList[0].carriageValue
psdData.serviceType
psdData.packageType
billingData.referenceData.yourReference
Maybe it's a URL encoding issue? Anyway, hope this helps.
I am trying to find the correct template and id to use for a hotprint of an advanced pdf template of an Item Fulfillment.
The hot print url is (with the id bolded) https://system.na3.netsuite.com/app/accounting/print/hotprint.nl?regular=T&sethotprinter=T&id=7600&label=Packing%20Slip&printtype=packingslip&trantype=itemship&orgtrantype=TrnfrOrd&auxtrans=7605
For some reason only certain id=# seems to affect the outcome and the ids I have got to work for two different templates don't match the Custom Transaction Forms ID or the Advanced pdf script id. (example most ids=template 1, while 168,4954, and seemingly random other ids=template 2) I am very confused on how netsuite resolves the hot print url as it normally doesn't include the template= part though I have seen others use it for invoice print urls.
The parameters at the end of the url (the stuff after the ?) are used by Netsuite to control settings used by the webpage which prints the PDFs for you.
In this case, &id=##### refers to the internal id of the document you are printing. You can see this by going to the document, right clicking, selecting inspect, and typing nlapiGetRecordId() into the console. When you click Print, you should see that same number after &id=#####.
&template=### refers to the template you are printing. If you go to Customization -> Forms -> Advanced PDF/HTML Templates, you'll notice a Script ID field in the table. If you substitute the correct Script ID in for the number in &template=###, you'll notice you generate the same PDF. This Script ID acts the same as the number that was previously there.
The reason you're seeing unusual results when you change those numbers is because you're mismatching a record with a template not built for it. So it won't print exactly right, but will sometimes execute anyways.
Anyways, this sort of parameter scheme is a similar scheme to how Suitelets and Restlets work, so in the future, you might experience this sort of thing again.
EDIT: For those reading this in the future, please read the comments.
To customize a packing slip and return form:
If you are printing packing slips and need some customization, you can use a custom invoice form when printing packing slips. For example, you can customize an invoice form to hide the fulfilled item tax rate and amount, and the order total. Then, when you print the packing slip using the custom form through mass print, choose the the packing slip shows the customized information.
I have a main report. It´s working fine. My problem is in the sub report. In my sub-report I have a procedure with startdate and enddate. I would like to know if it is possible I can use the same date range from main report in my sub-report. I got a solution, but my solution needs to input the date range in main report and the same date range in my sub-report
Right-click on the sub-report object and choose Change Sub-report Links, then select how the parameter is to be used by the sub-report.
you can watch this YouTube video explains how to change sub-report Links
you can read this post too about the same subject
you need to create the same parameters in sub report that you have created in main report and link those parameters using sub report links, Which you can get my right click the sub report in main report.
once you link both paramterts same input will be passed to sub report aswell.
To pass that date range to the subreport do a right click on it and Change Subreport Link. On Subreport Links window search for your parameters in the left side and move them to the right one, make sure once you have them on the right one the option for Select data in subreport based on field: is unchecked for those 2 parameters. Then click OK and open the subreport. Once inside the subreport, go to Report/Selection Formulas/Record... to open the record selection formula. Under your Report Fields you will see the 2 parameters and you will be able to pass them to the date field you have in your subreport.
All I want to do is create a Drill down report from say report "one" to report "two"
I can't find ANY documentation or examples on how to use Hyperlink Type ReportExecution for JasperReports Server
It all seems straight forward but it doesn't work (parameters aren't sent through)
HOW ITS CURRENTLY SETUP:
Target is set to "Self"
Type is set to "ReportExecution"
In reference tab I have correct link (it links to drill-down report successfully)
"./flow.html?_flowId=viewReportFlow&reportUnit=%2FNWU%2FStudentInformation%2FCurriculumManagement%2FAPQIBI005drill"
Anchor and page tab is empty (have no Idea what to put here since I cant find any Docs on it)
Link parameters have values in that should work but aren't (double checked everything here many times)
campusAndFaculty | $P{campusAndFaculty}
campus | $F{cn_campusname.cn_campusid}
Tooltip Tab is empty
What am I doing wrong? Why aren't the params being sent through?
NOTE:
Using JasperReports Server Pro 5.0.1 &
Using iReport 5.0.0
I also know of the sample report (/Reports/Samples/Employee List report.), but our server doesn't have any sample reports
Remove the link from your Reference tab. On the Link parameters tab, add a parameter named
_report
and set the expression for _report to reflect the path to the target report:
"/reports/myFolder/myReport"
Remember to include the quotation marks.
Also, it would seem that the Jaspersoft document site is down at the moment, but for future reference you can access the iReport guide here:
http://community.jaspersoft.com/documentation?version=7114
I have a report that is being passed parameters through the URL, but would like to have the report load by default before the user has to click the 'View Report' button. I have rs:Command=Render in the URL but this doesn't seem to be doing it. Is there another tag that I am missing here? The URL is currently as follows:
https://server/subfolder/viewreport.aspx?Report%Name&rs:Command=Render&Parameter1=Value1&Parameter2=Value2
The report comes up with the appropriate values selected by default, as passed above, but it does not run until I hit View Report. Do I need to specify all the other parameters in the report through the URL in order for it to run by default, even though those parameters already have default values?
Found it, the report renders automatically as long as all parameters have a 'Default' value specified. Two text parameters in the report needed to have their default expressions set to =""