I'm trying to save a record like so:
var testRecord = new SecRecord(SecKind.GenericPassword)
{
CreationDate = DateTime.UtcNow,
MatchCaseInsensitive = false,
Service = "MyService",
Label = "MyService",
Account = "User",
Generic = NSData.FromString("test", NSStringEncoding.UTF8),
};
SecKeyChain.Add(testRecord);
...but I'm getting SecStatusCode.Param back when I run it in the simulator. According to the documentation, that code means "Invalid or incomplete parameters passed" but I don't see anything missing or unusual that others aren't doing with apparent success.
Even adding CreationDate, Invisible, Description, Comment, Accessible, and ValueData properties to the SecRecord (some as in this example) didn't help -- still getting SecStatusCode.Param.
Are there any non-obvious things that might cause a Param status code to be returned?
I had a lot of trouble trying to use the keychain. I finally got mine working to store user credentials in the app. Here is what I have:
SecRecord existingRec = new SecRecord (SecKind.GenericPassword) {
Service = Keychain.USER_SERVICE,
Label = Keychain.USER_LABEL
};
var record = new SecRecord (SecKind.GenericPassword) {
Service = Keychain.USER_SERVICE,
Label = Keychain.USER_LABEL,
Account = username,
ValueData = NSData.FromString (password),
Accessible = SecAccessible.Always
};
SecStatusCode code = SecKeyChain.Add (record);
if (code == SecStatusCode.DuplicateItem) {
code = SecKeyChain.Remove (existingRec);
if (code == SecStatusCode.Success)
code = SecKeyChain.Add (record);
}
Keychain is a static class with constants so I don't have to retype the strings.
The only thing different between yours and mine is the CreationDate/MatchCaseInsensitive properties and the encoding for NSData. Maybe try it without those and see if it works? If so, add them back separately and see what gives the problem.
This might be because you are running on the simulator - in that case you need to add an Entitlements plist in the project options for your current build config in order to make keychain access work.
Related
I have an error occurring that I can't seem to find anything about. When I run my code I get the following error. I am not setting oDataType so I assume this is something done by the api itself.
ServiceException: Code: RequestBodyRead Message: The property 'oDataType' does not exist on type microsoft.graph.itemBody'. Make sure to only use property names that are defined by the type or mark the type as open type.
My code is mostly copied from microsoft samples.
var confidentialClientApplication = ConfidentialClientApplicationBuilder
.Create(clientId)
.WithTenantId(tenantId)
.WithClientSecret(clientSecret)
.WithAuthority(new Uri(authority))
.Build();
ClientCredentialProvider authenticationProvider = new ClientCredentialProvider(confidentialClientApplication);
client = new GraphServiceClient(authenticationProvider);
var message = new Microsoft.Graph.Message()
{
Subject = "Test email",
Body = new ItemBody
{
ContentType = BodyType.Text,
Content = "Test email."
},
HasAttachments = false,
ToRecipients = new List<Recipient>()
{
new Recipient
{
EmailAddress = new EmailAddress
{
Address = "myemail#mydomain.com"
}
}
}
};
var saveToSentItems = false;
await client.Users[userID].SendMail(message, saveToSentItems).Request().PostAsync();
Any help would be greatly appreciated.
Thank you
I suspect, you're using a older library/build. I remember the related issue and it's fixed last year itself.
Please update it with the latest one , try testing the same and let us know if you can still repro the issue or not.
I'm able to copy most test cases with this code (trying to copy shared steps to be part of the test case itself) but this one will not copy but I can not see any error message as to why - could anyone suggest anything else to try. See output from Immediate windows. Thanks John.
?targetTestCase.Error
null
?targetTestCase.InvalidProperties
Count = 0
?targetTestCase.IsDirty
true
?targetTestCase.State
"Ready"
?targetTestCase.Reason
"New"
foreach (ITestAction step in testSteps)
{
if (step is ITestStep)
{
ITestStep sourceStep = (ITestStep)step;
ITestStep targetStep = targetTestCase.CreateTestStep();
targetStep.Title = sourceStep.Title;
targetStep.Description = sourceStep.Description;
targetStep.ExpectedResult = sourceStep.ExpectedResult;
//Copy Attachments
if (sourceStep.Attachments.Count > 0)
{
string attachmentRootFolder = _tfsServiceUtilities.GetAttachmentsFolderPath();
string testCaseFolder = _tfsServiceUtilities.CreateDirectory(attachmentRootFolder, "TestCase_" + targetTestCase.Id);
//Unique folder path for test step
string TestStepAttachementFolder = _tfsServiceUtilities.CreateDirectory(testCaseFolder, "TestStep_" + sourceStep.Id);
using (var client = new WebClient())
{
client.UseDefaultCredentials = true;
foreach (ITestAttachment attachment in sourceStep.Attachments)
{
string attachmentPath = TestStepAttachementFolder + "\\" + attachment.Name;
client.DownloadFile(attachment.Uri, attachmentPath);
ITestAttachment newAttachment = targetTestCase.CreateAttachment(attachmentPath);
newAttachment.Comment = attachment.Comment;
targetStep.Attachments.Add(newAttachment);
}
}
}
targetTestCase.Actions.Add(targetStep);
targetTestCase.Save();
}
Since this code works for most test cases, this issue may come from the particular test case. In order to narrow down the issue, please try the following items:
Run the code on another client machine to see whether it works.
Try to modify this particular test case using the account API uses, to see whether it can be saved successfully.
Try validate the WorkItem prior to save. The validate() method will return an arraylist of invalid fields.
After hours spent reading through what's available online to fix this, I decided to post my question here.
My goal is simple: Store an X509Certficate to KeyChain using Xamarin for iOS. This is a self signed certificate that I generated using BouncyCastle library.
I'm successfuly importing it, but when saving to KeyChain using SecKeyChain.Add, the result is always SecStatusCode.Paramwhich the documentation explains is missing or invalid parameter. Here's the method I use
public static bool StoreCertInKeyChain(X509Certificate2 certificate, string password)
{
var data = certificate.Export(X509ContentType.Pkcs12, password);
var options = NSMutableDictionary.FromObjectAndKey(FromObject(password), SecImportExport.Passphrase);
var statusCode = SecImportExport.ImportPkcs12(data, options, out NSDictionary[] result);
if (statusCode != SecStatusCode.Success) return false;
var certChain = result[0][SecImportExport.CertChain];
var record = new SecRecord(SecKind.Certificate)
{
Label = "MyKey",
Account = "Certificate",
ApplicationTag = "MyTag"
};
record.SetValueRef(certChain);
// Using the below code instead, produces the same result
// var cert = new SecCertificate(certChain.Handle);
// record.SetValueRef(cert);
var resultAdd = SecKeyChain.Add(record);
return resultAdd == SecStatusCode.Success;
}
Has anyone ran into this problem? I'm out of ideas what else to try. I followed the examples given on Xamarin documentation site, without success. Thank you
Answering my solution here, in case anyone else runs into the same issue. The problem was that the certificate supplied in the SecRecord wasn't an instance of SecCertificate, so using SecImportExport.ImportPkcs12 was the wrong way to do it. I ended up using SecIdentity.Import instead, which gives a reference to the certificate as well as the private key in it. The certificate and the private key need to be added to key chain separately using an identity. Here's the code that accomplishes this.
var identity = SecIdentity.Import(certificate.Export(X509ContentType.Pkcs12, password), password);
var storedCertificate = SecKeyChain.QueryAsConcreteType(new SecRecord(SecKind.Certificate) { Label = "My Cert" }, out SecStatusCode statusCode);
if (statusCode != SecStatusCode.Success)
{
var record = new SecRecord(SecKind.Certificate);
record.Label = "My Cert";
record.SetValueRef(identity.Certificate);
var result = SecKeyChain.Add(record);
SecKeyChain.AddIdentity(identity);
storedCertificate = SecKeyChain.QueryAsConcreteType(new SecRecord(SecKind.Certificate) { Label = "My Cert" }, out statusCode);
}
var storedIdentity = SecKeyChain.FindIdentity(storedCertificate as SecCertificate);
The certificate can be retrieved using the label, but to get the private key, the identity must be queried using the certificate as parameter in SecKeyChain.FindIdentity. From this point on, access to signing and decryption on the private key is available from the identity instance.
We are using Rotativa in a .Net MVC 5 project. it works like a charm locally and fails (generates a blank PDF) equally when deployed to server. However, if I login to server and access the website as localhost it generates PDF just fine.
So it looked like a permission issue with which Application pool is running on. So, for testing purpose, I changed to run the App Pool to run on "Local System". Still same issue.
We have also tried:
"ViewasPDF"
App settings which looks like: <add key="WkhtmltopdfPath" value="<path to the folder>"/>
Below is the code:
return new ActionAsPdf("ActionMethod",new { id = id, partSelected = part, selectedTab = selectedTab, isDownload = true })
{
FileName = fileName,
PageMargins = { Left = 0, Right = 0 },
CustomSwitches = "--disable-external-links --disable-internal-links --disable-smart-shrinking --viewport-size 1600x900 --load-error-handling ignore",
PageOrientation = Rotativa.Options.Orientation.Portrait,
PageSize = Rotativa.Options.Size.A4,
PageWidth = 210,
PageHeight = 297
};
First, you have disabled displaying error with the custom switch --load-error-handling ignore. It might help to not have it disabled temporarily for the purpose of debugging.
Secondly, a blind guess from me is that you may have some images that require local path as src on the pdf? If that's the case you will need #Server.MapPath for each one of those.
For example:
<img src="#Server.MapPath("your image path")"/>
var iResult = new Rotativa.ActionAsPdf("PrintForm", new { Id = Id }) { FileName = iFilename, SaveOnServerPath = ViewBag.FileName };
iResult.UserName = System.Configuration.ConfigurationManager.AppSettings["ADUserID"].ToString();
iResult.Password = System.Configuration.ConfigurationManager.AppSettings["ADPassword"].ToString();
return iResult;
Here is a code example where aduser is user name and password, please create a generic user account for this..
I am currently focussing a problem which I thought it would be easy to solve. but I didnt. There are controls which allow us to show the username or logged in user, such as the lovely shell-headitems:
var oShell = new sap.ui.ux3.Shell("myShell", {
headerItems: [
new sap.ui.commons.TextView({
text: oController.getUserName() }),
],
});
It looks like this:
In here we define headerItems, which are in my opinion foreseen to show a username / or the currently logged in user. but how can I receive it? my idea is to get it from the odata request, which was made earlier. It requires me to enter username and password -> thus I want to read this username in my controller-method, but how?
getUserName : function() {
// return navigator.userAgent;
var model = sap.ui.getCore().getModel();
return model.getProperty('sUser'); // doesnt work :(
},
I also tried to get it from navigator.userAgent() but this information does not belong to the user.
Anybody knows how to receive it?
And yes: I searched in google and found some threads discussing about users/login but none of these threads solved my issue. Otherwise I thought about transferring sy-uname from SAP to the frontend, but how could you send a single Text? I don't want to build a complete service for this single transaction.
If you do not provide sUser and sPassword during oData-Model-Initialization it will be empty during runtime. You cannot access it from the model, though I realized an own service for this.
The username is in the sap.ui.model.odata.ODataMetadata of ODataModel.
var getUserName = function() {
var model = sap.ui.getCore().getModel();
var sUser = model.oMetadata.sUser;
// Display user logic here.
};
oModel.attachMetadataLoaded(null,getUserName);
Update answer for comment question from zyrex:
var user = new sap.ui.commons.TextView();
var getUserNameCallBack = function(userName) {
user.setText(userName);
}
oController.getUserName(getUserNameCallBack);
Controller method:
getUserName: function(callback) {
var userName = '';
$.getJSON(sServiceUrl).done(function(data) {
userName = data.d.Name;
callback(userName);
});
}