Our Umbraco site was writing out its site structure to its XML config file for most of the project but recently it has stopped doing this and we don't know why. We haven't done anything new or unusual and we didn't notice it straight away so we are not to sure if there was a change that actually triggered this.
I have checked the premissions on the folder and i am sure that it has premissions to write.
I don't know what else to look for. Does anybody have any suggestions for what i should be looking for or experience with this happening?
The best place to start look at this problem is Umbraco Database.you can see a table name dbo.umbracoLog .In this table all activities like writing to xml config files will be recorded.If an error has occurred you will definitely get some info from there which will lead you to finding out the real cause
Well i figured it out after binary sorting my way through the revision history there was a change in the app config:
<add key="umbracoContentXMLUseLocalTemp" value="true" />
setting this to false made this reappear im my App_Data folder. I assume that it was actually appearing in the temp folder when this was set to true. If somebody wants to edit this answer with more specifics it would be interesting to know what this setting actually does.
Related
The template comes without database at first. When I launch the application some code must create the db obviously, because I check the appData folder and now it's there.
Can you tell me which part of the code creates it? Thanks. I have long looked at the code and I cannot figure it out.
I think the only answer possible is that entity framework creates the database automatically. But the strange thing is if I remove thee database it does not get recreated, I get an error that says it's missing it.
I just got a typo3 website and need to transfer to an other domain.
Is it enough to copy all the folders (except typo3temp?) to the new place?
First I just changed baseurl in ts but it didn't do anything..
Should I do anything with the database when it still on the same server?
In case your question is about "cloning" a complete TYPO3-system an rsync/copy of the whole folder (yes including typo3temp) is the best idea, as this works on all versions, everything else (like excluding typo3temp) depends a whole lot on your TYPO3 expertise to resolve. The database needs to be copied as well. If you need to change db-name or db-credentials on the new system you need to change them in
typo3conf/LocalConfiguration.php
As soon as you have done this Install Tool and Backend should work: At first try the Install Tool:
https://my.new.domain/typo3/install/
If that doesn't work your problem is with the webserver configuration or dns.
If that works (and the reports there show no errors), try the Backend:
https://my.new.domain/typo3/
In case your question is about which changes are necessary to your TYPO3-installation if domain changes and the web server itself is configured correctly, then there are probably two things you need to change, in order to make the frontend work (although both cases might be omitted, depending on your configuration):
sys_template record, if any of those use absRefPrefix or baseurl. If you have access to the MySQL-Database a
SELECT pid FROM sys_template WHERE config LIKE "%baseurl%" OR "%absRefPrefix";
might help finding the template, however these template configuration might also be stored in files (typically in fileadmin/templates/**)
sys_domain records, a MySQL
SELECT pid FROM sys_domain;
might uncover where those are stored
However these changes are only necessary to enable the frontend to work.
Add a domain record in the backend. And while you don't need the content of the typo3temp folder, make sure the folder actually exists.
When you go to the new domain name in your browser, what happens?
Do you get redirected to the old domain? If so, maybe there is an .htaccess redirect happening.
Do you get to the new domain, but if you click on a link end up on the old one?
Do you get an error? If so, what is the error?
Does something else happen?
We have never experienced this issue in Umbraco 4, but we've got this twice in Umbraco 7.
The Problem
So we've got a page: www.mywebsite.com/sale
It has been working for a month, then suddenly it shows 404:
The (non-ideal) Solution
We could change the template of this document, eg. from SalePage to TextPage, then back to SalePage.
That will temporarily fix it.
But after IIS restart, or after republishing the page, it will show the 404 error again.
For a permanent fix, we have to change the page name, eg. from Sale to Sale1.
The Question
Sometimes changing the page name is not an ideal solution at all.
Has anyone experienced this? Or know where to look? May be the database has a corrupted entry somewhere..?
We found the problem! We have this structure under Content:
Home
HomeSlide1
HomeSlide2
Pages
Sale
About Us
etc
The problem started when someone created a "home slide" under Home called "sale".
So, both Home/sale and Pages/Sale has the same path: /sale/
Deleting/renaming Home/sale fixed the problem.
This sounds like a corrupt cache.
To find out what went wrong:
Investigate the xml config (/config/umbraco.config)? I suspect this file will still contain the correct information.
If the umbraco.config file doesn't contain wrong elements, check the examine indexes. When you do a "rebuild indexes" from the developer node in the umbraco backend the problem might go away also.
If you know what is going wrong, you can start finding a solution for fixing the issue. E.g. finding out which action went wrong.
Several times a day I receive this error while running my asp.net mvc4 project. I am not asking what that means, or how to fix it, but what am I doing to cause it? It is really starting to bug me, and if I can cause it to go away by altering my workflow I will.
Cannot create/shadow copy '< assembly >' when that file already exists.
As I mentioned above the project is an MVC4 application. My workflow is typically.
Make a change (code or html)
If it was code, rebuild the project (using keyboard shortcut CTRL+SHIFT+B)
refresh the page
see annoying error
clean the solution
rebuild solution
refresh page
verify change
goto 10
(I get the error with/without the debugger attached.) I will be eternally grateful to anyone who can inform me on how to avoid this error, and will promptly tweet your praises
I find this annoying too. It seems to happen when you try to refresh the page in a browser before the build is fully complete. Try counting to three-one-thousand after build is complete and then refresh in the browser. Create/shadow copy should be done by that point.
I also don't think you should need to "clean solution". I believe a rebuild is a clean + build, so you may be cleaning twice.
After a bit of research, I also found this pre-build event which seems to be popular. (this workaround does not seem to work, perhaps it did in previous versions of VS / .NET framework)
Update: alternate solution
Another way to get by this is, when you see the YSOD, just type in a different URL in the browser and load it instead. Then click the back button and refresh to get to the page you were trying to reload in the first place.
What's causing this error seems to be doing the shadow copy (stating the obvious...), ie generating a file in one folder and then reading it to copy it elsewhere. I think what's causing the issue is generating or not that first file, and when/how it's copied, regardless of what your actions are. Does this first file (that will be shadow copied) needs regenerating, and therefore re-shadow copied?
This post says:
By default shadow copy is enabled on every appdomain created by ASP.NET. Assemblies loaded will be copied to a shadow copy cache directory, and will be used from there. So that the original file is not locked and can be modified.
And their fix is to prevent shadow copy. But I don't personnally fully understand what shadow copy does in the asp.net context, maybe someone can clarify if there are any bad side effect to disabling it:
<configuration>
<system.web>
<hostingEnvironment shadowCopyBinAssemblies="false" />
</system.web>
</configuration>
This post talks about disabling indexing and/or antivirus, which would suggest that building the project generates new files, and the antivirus (or indexing service) accesses them and locks them, just when the shadow copy is trying to copy that exact same file.
I get his error regularly and never found what specific action I do causes the error. I make a code change, press F5 (Run/ Play button), get the error in the web browser, close the web browser, press F5 again. It now works. I don't clean, I don't rebuild. However, with the second F5/Run, I believe VS detects there's been no code change, and therefore, maybe the shadow copy is not redone? Or maybe this time the shadow copy is timed slightly differently and it works.
I received this error after adding a new image to my web project.
In VS, each image has a property entitled "Copy to Output Directory". I chose "Copy Always", then I got the message.
I changed it to "Do Not Copy" - now it is happy.
Hope that helps someone.
Each time I make a change to an Umbraco template and press Save, I get the confirmation popup saying:
Template saved
Template saved without any errors!
However, when I return to that template (click on another template and then back again), the changes have been lost.
I've ensured that the user account running my IIS application pool has Full Control over the \Views folder containing the .cshtml files (i.e. the Umbraco templates).
Strangely this just started happening, after it had been letting me make template changes with no problems. I can manually edit the .cshtml files on disk, but this seems ridiculous.
Any ideas?
A couple of things:
1) Have you checked that the following Windows accounts have full permissions for all folders "IUSR", "IIS_IUSRS", "NETWORK SERVICE" ?
2) Probably not but I have had problems in the past with caching. Have you disabled (set from True to False) caching properties in /config/umbracoSettings.config ? This should always be done during development.
OK, I'll provide an answer for others' future reference (although the reasons are unclear to me). It appears the change I was making to my Template must've been deemed invalid by Umbraco - when I strip the template text down to just a single, empty div and save it, the change is persisted successfully.
The confusing thing is that Umbraco provides no feedback as to why it's not saving - in fact it tells you that it HAS saved successfully.
Bizarre and confusing.
Just been editing my templates and got this problem. Fixed it by doing the following:
sign out of umbraco
clear your browsing data
sign back into umbraco
always be sure to copy and paste your code somewhere to keep it safe, and it can be easily pasted back in. Seems like a bug to me... but it saved after I did that.
(Using Umbraco 7)