I have a very peculiar problem and I'm looking for suggestions that might help me get to the bottom of it.
I have an application in .NET 3.5 (MVC3) on a SQL Server 2008 R2 database.
Locally and on two other servers, it runs fine. But on the live server there is a stored procedure that always times out after 30 seconds.
If I run the stored procedure on the database, it takes a couple of seconds. But the if the stored procedure is received by the application, then profiler says it took over 30 seconds.
The same query the profiler receives, runs immediately if we run it directly on the DB.
Furthermore, the same problem doesn't occur on any of the other 3 local servers.
As you can understand, it's driving me nuts and I don't even have a clue how to diagnose this.
The even logs just show the timeout as a warning.
Has anyone had anything like this before and where could I start looking for a fix?
Many thanks
You probably have some locking taking place in your application that doesn't occur when running the query on the server.
To test this run your query in your application using READ UNCOMMITTED or the NOLOCK hint. If it works you need to check your sequence of calls or check to see whether your isolation level isn't too aggressive.
These can be tricky to nail down.
Related
I've read all post with the same or very close headline, but still can't find a proper solution or explanation to my problem.
I'm working with MySQL Workbench 6.3 CE. I have been able to create a database with several tables, and create a conexion with python to write data to it. Still, I had a problem related to a varchar field that needed to be set to more than 45 characters. When I try to set it to bigger limits, like VARCHAR(70), no matter how many times I try, wether I set higher limits for timeout, I get the 2013 error, saying my connection was closed during the query.
I'm using the above version of workbench, on windows 10, and I'm trying to modify that field from the workbench. Afer that first time, I can't drop a table either, nor can I connect from python.
What is happening?
Ok, apparently what was happening is that I had a block, and there where a lot of query waiting in a situation of "waiting for table metadata block".
I did the following in the console of workbench
Select concat('KILL ',id,';') from information_schema.processlist where user='root'
that generates a list of all those processes. I copy that list in a new tab, and execute a massive kill of processes. After that it worked again.
Can anybody explain me how did I arrive to that situation and what precautions to take in my python scripts so as to avoid it?
Thnak you
We have a website created in asp-mvc4 running on iss on windows server 2012 and using MSSQL 2012 as data storage. Connections are done using entity framework-6... Very standard stuff.
We are not a high volume website (max 3000 users around the world so hitting it in different timezones)
The issue is that sometimes without warning the site becomes unresponsive (browser does not show it and time out). Nothing special but here is the strange issues:
The server itself is working fine if you terminal server into it
Restarting the ISS does not help er there are no error logs
SQL server have around 100 connections from the website all sleeping (but killing theses processes does not make the site recover)
SQL server at the time show half of them as waiting tasks but it is still responsive if executing sql from SSMS or even remote from excel (remote reporting)
Looking at SQL Profiler website is still sending in SQL request despite being down but they are all request like this: if db_id('dbname') is not null else select... (Not something specifically written in the website)
the really strange one: If we restart the SQL server the website becomes responsive again)
I know this is not a lot to go on but we are very puzzled and don't really know how to proceed. Northing indicate error in any kind of log (website, iss, sql server or windows). I can deduct it must be the website thinking SQL cannot give it what it need because connection pool or something is used up but why it is only freed up with a complete sql server restart and not just killing the processes really puzzles me, and why the connection pool buildup happen in the first place since and sql is handled in entity framework
Any advice on how to debug further is most welcome
Whenever I try to run cypher queries in Neo4j browser 2.0 on large (anywhere from 3 to 10GB) batch-imported datasets, I receive an "Unknown Error." Then Neo4j server stops responding, and I need to exit out using Task Manager. Prior to this operation, the server shuts down quickly and easily. I have no such issues with smaller batch-imported datasets.
I work on a Win 7 64bit computer, using the Neo4j browser. I have adjusted the .properties file to allow for much larger memory allocations. I have configured my JVM heap to 12g, which should be fine for 64bit JDK. I just recently doubled my RAM, which I thought would fix the issue.
My CPU usage is pegged. I have the logs enabled but I don't know where to find them.
I really like the visualization capabilities of the 2.0.4 browser, does anyone know what might be going wrong?
Your query is taking a long time, and the web browser interface reports "Unknown Error" after a certain timeout period. The query is still running, but you won't see the results in the browser. This drove me nuts too when it first happened to me. If you run the query in the neo4j shell you can verify whether or not this is the problem, because the shell won't time out.
Once this timeout occurs, you can find that the whole system becomes quite non-responsive, especially if you re-run the query, because now you have two extremely long queries running in parallel!
Depending on the type of query, you may be able to improve performance. Sometimes it's as simple as limiting the number of returned nodes (in cases where you only need to find one node or path).
Hope this helps.
Grace and peace,
Jim
Ok. I know I don't have a lot of information. That is, essentially, the reason for my question. I am building a game using Flash/Flex and Rails on the back-end. Communication between the two is via WebORB.
Here is what is happening. When I start the client an operation calls the server every 60 seconds (not much, right?) which results in two database SELECTS and an UPDATE and a resulting response to the client.
This repeats every 60 seconds. I deployed a test version on heroku and NewRelic's RPM told me that response time degraded over time. One client with one task every 60 seconds. Over several hours the response time drifted from 150ms to over 900ms in response time.
I have been able to reproduce this in my development environment (my Macbook Pro) so it isn't a problem on Heroku's side.
I am not doing anything sophisticated (by design) in the server app. An action gets called, gets some data from the database, performs an AR update and then returns a response. No caching, etc.
Any thoughts? Anyone? I'd really appreciate it.
What does the development log say is slow for those requests? The view or db? If it's the db, check to see how many records there are in database and see how to optimize the queries. Maybe you need to index some fields.
Are you running locally in development or production mode? I've seen Rails apps performance degrade faster (memory usage) over time in development mode. I'm not sure if one can run an app on Heroku in development mode but if I were you I would check into that.
I have a website that is hanging every 5 or 10 requests. When it works, it works fast, but if you leave the browser sit for a couple minutes and then click a link, it just hangs without responding. The user has to push refresh a few times in the browser and then it runs fast again.
I'm running .NET 3.5, ASP.NET MVC 1.0 on IIS 7.0 (Windows Server 2008). The web app connects to a SQLServer 2005 DB that is running locally on the same instance. The DB has about 300 Megs of RAM and the rest is free for web requests I presume.
It's hosted on GoGrid's cloud servers, and this instance has 1GB of RAM and 1 Core. I realize that's not much, but currently I'm the only one using the site, and I still receive these hangs.
I know it's a difficult thing to troubleshoot, but I was hoping that someone could point me in the right direction as to possible IIS configuration problems, or what the "rough" average hardware requirements would be using these technologies per 1000 users, etc. Maybe for a webserver the minimum I should have is 2 cores so that if it's busy you still get a response. Or maybe the slashdot people are right and I'm an idiot for using Windows period, lol. In my experience though, it's usually MY algorithm/configuration error and not the underlying technology's fault.
Any insights are appreciated.
What diagnistics are available to you? Can you tell what happens when the user first hits the button? Does your application see that request, and then take ages to process it, or is there a delay and then your app gets going and works as quickly as ever? Or does that first request just get lost completely?
My guess is that there's some kind of paging going on, I beleive that Windows tends to have a habit of putting non-recently used apps out of the way and then paging them back in. Is that happening to your app, or the DB, or both?
As an experiment - what happens if you have a sneekly little "howAreYou" page in your app. Does the tiniest possible amount of work, such as getting a use count from the db and displaying it. Have a little monitor client hit that page every minute or so. Measure Performance over time. Spikes? Consistency? Does the very presence of activity maintain your applicaition's presence and prevent paging?
Another idea: do you rely on any caching? Do you have any kind of aging on that cache?
Your application pool may be shutting down because of inactivity. There is an Idle Time-out setting per pool, in minutes (it's under the pool's Advanced Settings - Process Model). It will take some time for the application to start again once it shuts down.
Of course, it might just be the virtualization like others suggested, but this is worth a shot.
Is the site getting significant traffic? If so I'd look for poorly-optimized queries or queries that are being looped.
Your configuration sounds fine assuming your overall traffic is relatively low.
To many data base connections without being release?
Connecting some service/component that is causing timeout?
Bad resource release?
Network traffic?
Looping queries or in code logic?