I have a horizontally-scrolling paging UIScrollView in an iPad app, containing lots of pages. On the last page, I tap on a button on the screen to reset back to page 1. I would like to be able to cross-dissolve this transition, but it doesn't seem to work:
[UIView transitionWithView:self.view duration:1.0 options:UIViewAnimationOptionTransitionCrossDissolve|UIViewAnimationOptionAllowAnimatedContent animations:^{
pagingScrollView.contentOffset = CGPointZero;
} completion:^(BOOL finished) {
[self refreshPages];
}];
I read that adding UIViewAnimationOptionAllowAnimatedContent will allow all content to transition, but it doesn't work. Instead, the screen cross-dissolves to the background colour, and when the transition is complete, the first page just appears.
you cannot fade-out a UIView (the scroller) AND simultaneously fade-in the same view...
you could just using different UIViews...
what you can do is:
1) fadeOut the scroller in the current position (to the backGround)
2) while the scroller is invisible, move it to the right position (with no animation)
3) fadeIn the scroller from the backGround
something like:
// START FIRST PART OF ANIMATION
[UIView animateWithDuration:0.5 delay:0.0 options: options:UIViewAnimationOptionTransitionCrossDissolve|UIViewAnimationOptionAllowAnimatedContent animations:^{
pagingScrollView.alpha = 0;
} completion:^(BOOL finished) {
// FIRST PART ENDED
// MOVE SCROLLER (no animation)
pagingScrollView.contentOffset = CGPointZero;
// START SECOND PART OF ANIMATION
[UIView animateWithDuration:0.5 delay:0.0 options: options:UIViewAnimationOptionTransitionCrossDissolve|UIViewAnimationOptionAllowAnimatedContent animations:^{
// fadeIn - animated
pagingScrollView.alpha = 1;
} completion:^(BOOL finished) {
// ANIMATION ENDED
[self refreshPages];
}];
}];
NEW EDIT:
thanks to amadour, who taught me something with his comments,
i hope he could add an answer of his own, i would vote for him
anyway, to answer to jowie original question:
i got the right animation just moving the contentOffset setting out of the animation block,
and removing UIViewAnimationOptionAllowAnimatedContent (not really needed), and passing pagingScrollView as parameter for transitionWithView
this worked for me:
pagingScrollView.contentOffset = CGPointZero;
[UIView transitionWithView:pagingScrollView duration:3.0 options:UIViewAnimationOptionTransitionCrossDissolve animations:^{
// pagingScrollView.contentOffset = CGPointZero; // move up, outside of animation block
} completion:^(BOOL finished) {
NSLog(#"-->> END amimation");
[self refreshPages];
}];
Related
I have a viewcontroller and childView add the viewcontroller.
if the childView add animation and stratAinmation:
[UIView animateWithDuration:1.0f animations:^{
} completion:^(BOOL finished) {
}];
Question:
system animation (page goes down) not smooth whendismissviewcontrolleranimated
if the childView add animation but don't stratAinmation:
system animation is very smooth whendismissviewcontrolleranimated
My plan:
I trychildViewremoveAllAnimation when viewWillDisappear,the animation not smooth too.
help me,thanks.
I have an object that falls from the top of the screen however i want it to come back up after the bottom of the object reaches the bottom of the screen. This is my code at the moment. I tried adding another image view to trigger the up motion by collision. The timer is in ViewDidLoad
hammer.center = CGPointMake(hammer.center.x, hammer.center.y + 12);
if (CGRectIntersectsRect(hammer.frame, floor.frame)) {
hammer.center = CGPointMake(hammer.center.x , hammer.center.y -50);
}
you wont see it animate, maybe try animating the view instead of moving it instantly.
Place this in viewDidAppear to see it after the view has come on the screen.
[UIView animateWithDuration:0.3f
animations:^{
hammer.center = CGPointMake(hammer.center.x, hammer.center.y + 12);
} completion:^(BOOL finished) {
[UIView animateWithDuration:0.3f
animations:^{
if (CGRectIntersectsRect(hammer.frame, floor.frame)) {
hammer.center = CGPointMake(hammer.center.x , hammer.center.y -50);
}
}];
}];
I've been reading about UIView animateWithDuration which I'm trying to use so when a button is pressed a graphic appears then slowly fades out (i.e. alpha is set to 0).
I'm using the code below in my viewdidload just for test purposes however its not working:
[UIView animateWithDuration:10 animations:^{
self.completeImage.alpha = 1.0;
self.completeImage.alpha = 0.5;
self.completeImage.alpha = 0.0;
}];
Any ideas?
Thanks.
That is not working because automatically it sets the alpha to 0.0;
The 3 lines of code are executed at the same time (one after the other).
The proper way to use the UView animation block it is like this:
self.completeImage.alpha = 0.0;
[UIView animateWithDuration:2.0
animations:^{
// do first animation
self.completeImage.alpha = 1.0;
}
completion:^(BOOL finished){
[UIView animateWithDuration:2.0
animations:^{
// do second animation
self.completeImage.alpha = 0.0;
}
completion:^(BOOL finished){
;
}];
}];
Hope this achieve what you are looking for.
In addition:
" I'm trying to use so when a button is pressed a graphic appears
then slowly fades out (i.e. alpha is set to 0)."
As per your above information in the question, addition of the code in viewDidLoad will not prove fruitful. You need to add this code in the action target method of your button in order to play the animation on click of a button. Generally if you're using the nib, then the action method will be like below:
-(IBAction)on_pressing_my_button:(id)sender
{
///your animation code goes here..
}
I created some animations in my project. Basically, I use UIView animate and CGAffineTransform, but a very strange thing happened and I have no idea. Hope someone can help me solve this problem. Thanks in advance.
This is the strange thing:
After the user clicks on a button, the button slides off screen and another two buttons slide on the screen (I just changed the center point of these buttons to achieve this animation). And, some time later, a view on the screen start shaking (I use CGAffineTransform to achieve this).
At this moment, the strange thing happens - the button that previous slid off screen show up at its original position again and the other two buttons disappear (No animation, just shows up and disappear).
The following is the related code,
1) Button slide off and slide in animation related code
- (IBAction)start:(id)sender
{
// 1. Slide in cancel and pause button
[UIView animateWithDuration:0.5f animations:^{
[startButton setCenter:CGPointMake(startButton.center.x + 300.0f, startButton.center.y)];
[cancelButton setCenter:CGPointMake(cancelButton.center.x + 300.0f, cancelButton.center.y)];
[pauseButton setCenter:CGPointMake(pauseButton.center.x + 300.0f, pauseButton.center.y)];
} completion:^(BOOL finished) {
if (finished) {
NSLog(#"Move finished");
}
}];
}
2) The view shaking animation related code
- (void)shakeView:(UIView *)viewToShake
{
CGFloat t = 2.0;
CGAffineTransform translateRight = CGAffineTransformTranslate(CGAffineTransformIdentity, t, 0.0);
CGAffineTransform translateLeft = CGAffineTransformTranslate(CGAffineTransformIdentity, -t, 0.0);
viewToShake.transform = translateLeft;
[UIView animateWithDuration:0.07 delay:0.0 options:UIViewAnimationOptionAutoreverse|UIViewAnimationOptionRepeat animations:^{
[UIView setAnimationRepeatCount:2.0];
viewToShake.transform = translateRight;
} completion:^(BOOL finished) {
if (finished) {
[UIView animateWithDuration:0.05 delay:0.0 options:UIViewAnimationOptionBeginFromCurrentState animations:^{
viewToShake.transform = CGAffineTransformIdentity;
} completion:nil];
}
}];
}
This isn't weird, it's a common problem with
auto layout. If you move UI elements by changing frames, then as soon as something else takes place that requires laying out views, the moved views will revert to the position defined by their constraints. To fix it, you either need to turn off auto layout, or do your animations by changing constraints not frames.
I have tried your code in my test project. The problem is probably because you are using Autolayout in your xib.
Please checking your xib file and uncheck the Autolayout property.
I want something similar in purpose to Flipboard slight flipping animation on app start. Flipboard when launched has this slight flipping of up and down to show users unfamiliar with the interface that it is flippable.
I have a UIScrollView I want to animate a bit to show the user that it's scrollable. So I want to scroll to the right a little bit and back. UIScrollView has a setContentOffset:animated: message without a completion clause. I find that calling it twice results in seemingly no animation. What if I want an animation after animation in succession?
EDIT:
Thanks Levi for the answer.
And for the record, there is UIViewAnimationOptionAutoreverse and UIViewAnimationOptionRepeat that I can use. So this is what I ended up with that works.
CGPoint offset = self.scrollView.contentOffset;
CGPoint newOffset = CGPointMake(offset.x+100, offset.y);
[UIView animateWithDuration:0.5 delay:0 options:UIViewAnimationOptionCurveEaseIn | UIViewAnimationOptionAutoreverse |UIViewAnimationOptionRepeat animations:^{
[UIView setAnimationRepeatCount: 2];
[self.scrollView setContentOffset:newOffset animated: NO];
} completion:^(BOOL finished) {
[self.scrollView setContentOffset:offset animated:NO];
}];
For a scrollView, tableView or collectionView if you do something like this:
[self.collectionView setContentOffset:CGPointMake(self.collectionView.contentOffset.x+260.0,
self.collectionView.contentOffset.y)
animated:YES];
then you'll get back a:
-(void)scrollViewDidEndScrollingAnimation:(UIScrollView *)scrollView
when the scroll finishes.
You do NOT get this callback if the user moves the view.
Two options:
1) Use the -(void)scrollViewDidEndScrollingAnimation:(UIScrollView *)scrollView delegate callback
2) Try to put it into an animation block (with ... animated:NO];), which has the completion part.