i'm trying to move my rails app from ubuntu to osx. when running rspec, i get the following obscure error:
/Users/josh/dev/myproject/spec/support/devise.rb:3:in `block in <top (required)>': uninitialized constant RequestHelpers (NameError)
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/rspec-core-2.11.1/lib/rspec/core.rb:92:in `configure'
from /Users/josh/dev/myproject/spec/support/devise.rb:1:in `<top (required)>'
from /Users/josh/dev/myproject/spec/spec_helper.rb:21:in `block (2 levels) in <top (required)>'
from /Users/josh/dev/myproject/spec/spec_helper.rb:21:in `each'
from /Users/josh/dev/myproject/spec/spec_helper.rb:21:in `block in <top (required)>'
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/spork-0.9.2/lib/spork.rb:24:in `prefork'
from /Users/josh/dev/myproject/spec/spec_helper.rb:4:in `<top (required)>'
from /Users/josh/dev/myproject/spec/controllers/comments_controller_spec.rb:1:in `require'
from /Users/josh/dev/myproject/spec/controllers/comments_controller_spec.rb:1:in `<top (required)>'
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/rspec-core-2.11.1/lib/rspec/core/configuration.rb:780:in `load'
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/rspec-core-2.11.1/lib/rspec/core/configuration.rb:780:in `block in load_spec_files'
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/rspec-core-2.11.1/lib/rspec/core/configuration.rb:780:in `map'
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/rspec-core-2.11.1/lib/rspec/core/configuration.rb:780:in `load_spec_files'
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/rspec-core-2.11.1/lib/rspec/core/command_line.rb:22:in `run'
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/rspec-core-2.11.1/lib/rspec/core/runner.rb:66:in `rescue in run'
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/rspec-core-2.11.1/lib/rspec/core/runner.rb:62:in `run'
from /Users/josh/.rvm/gems/ruby-1.9.3-p286#myproject/gems/rspec-core-2.11.1/lib/rspec/core/runner.rb:8:in `block in autorun'
everything works nicely in Ubuntu, so i guess it must be environmental. Any ideas where to start digging?
thanks
- Josh
EDIT: no idea why, but the file request_helpers.rb could not be found by rake. moving it elsewhere resolved the issue.
This hardly seems an operating system problem, much rather a matter of configuration. Make sure your environemnt is the same in terms of:
using rvm installed the same way
having all the needed gems in the Gemfile
using bundle to execute rspec
using the same version of everything.
By te way this is not an obscure message, it's in fact pretty clear:
uninitialized constant RequestHelpers (NameError)
so the spec/support/devise.rb file can't find the needed class.
Have you written that file? If not, how did you generate it? Repeat the procedure to generate it (probably rake something or rails generate something) and it will be OK.
Related
Hi I am having a problem using devise with the ruby on rails server. My server was running fine until I ran a rake routes and realized the server is missing some devise files. Currently the ruby on rails server wont even start. I do remember moving my devise folder but cant remember where it should be for the server to come back online.
This is the error message I get in the console. Can someone please help? Thanks.
C:\Users\rich\treebook>rails server
C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/devise-3.2.1/lib/devise.rb:266:in `<m
odule:Devise>': cannot load such file -- devise/controllers/helpers (LoadError)
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/devise-3.2.1/lib/devise.
rb:8:in `<top (required)>'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundle
r/runtime.rb:72:in `require'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundle
r/runtime.rb:72:in `block (2 levels) in require'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundle
r/runtime.rb:70:in `each'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundle
r/runtime.rb:70:in `block in require'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundle
r/runtime.rb:59:in `each'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundle
r/runtime.rb:59:in `require'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundle
r.rb:132:in `require'
from C:/Users/Sam/treebook/config/application.rb:7:in `<top (required)>'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/railties-3.2.13/lib/rail
s/commands.rb:53:in `require'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/railties-3.2.13/lib/rail
s/commands.rb:53:in `block in <top (required)>'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/railties-3.2.13/lib/rail
s/commands.rb:50:in `tap'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/railties-3.2.13/lib/rail
s/commands.rb:50:in `<top (required)>'
from script/rails:6:in `require'
from script/rails:6:in `<main>'
Have you done
rails generate devise:install?
Also I agree with Zippie that uninstalling and reinstalling may be the way to go.
I am very new to rails and am trying to get my app setup via rubber. I was able to get a test app up without issue but am running into some sort of error when actually trying to vulcanize my built app. Tried to search high and low to no avail. Anyone have any idea what I need to do to get rid of the issue? Much appreciated.
localhost:thiswins markhayden$ rubber vulcanize complete_passenger_nginx_mysql
/usr/local/rvm/gems/ruby-1.9.3-p392/gems/rubber-2.2.4/lib/rubber/commands/vulcanize.rb:53:in `block in <class:Vulcanize>': undefined method `-' for "complete_passenger_nginx_mysql":String (NoMethodError)
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/attribute/declaration.rb:33:in `instance_exec'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/attribute/declaration.rb:33:in `block in define_writer_for'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/parameter/parsing.rb:13:in `block (2 levels) in parse_parameters'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/parameter/parsing.rb:12:in `each'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/parameter/parsing.rb:12:in `block in parse_parameters'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/parameter/parsing.rb:10:in `each'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/parameter/parsing.rb:10:in `parse_parameters'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/command.rb:55:in `parse'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/command.rb:68:in `run'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/subcommand/execution.rb:11:in `execute'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/command.rb:69:in `run'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/clamp-0.6.0/lib/clamp/command.rb:127:in `run'
from /usr/local/rvm/gems/ruby-1.9.3-p392/gems/rubber-2.2.4/bin/rubber:17:in `<top (required)>'
from /usr/local/rvm/gems/ruby-1.9.3-p392/bin/rubber:19:in `load'
from /usr/local/rvm/gems/ruby-1.9.3-p392/bin/rubber:19:in `<main>'
from /usr/local/rvm/gems/ruby-1.9.3-p392/bin/ruby_noexec_wrapper:14:in `eval'
from /usr/local/rvm/gems/ruby-1.9.3-p392/bin/ruby_noexec_wrapper:14:in `<main>'
We had this same problem with:
rubber vulcanize complete_passenger_postgresql
It seems to be an error in the gem at rubber/commands/vulcanize.rb on Line 53 because it tries to subtract an array from a string which is illegal. I changed it to (as sudo):
invalid = (arg.kind_of?(String) ? [arg] : arg) - VulcanizeThor.valid_templates
This allowed setup however I am not sure if the vulcanization did more than it was supposed to have because I am also new to Rubber. This was a drastic measure so be careful by trying it on a non-production environment first!
in my application, in the last few days, i'm unable to run the rails server/rails s or even bundle exec rails server command any more.
it was running like a charm before.
i tried to revert the changes using git, but no luck, i tried all the possible proprieties i could think of.
i use rubymine, but same problem when using the Terminal .
when i run:
ma#SL510:~/ts$ rails server
i get the following error stack trace :
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/activesupport-3.2.13/lib/active_support/dependencies.rb:251:in `block in require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/activesupport-3.2.13/lib/active_support/dependencies.rb:236:in `load_dependency'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/activesupport-3.2.13/lib/active_support/dependencies.rb:251:in `require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392#global/gems/unicorn-4.6.2/lib/unicorn/http_request.rb:4:in `<top (required)>'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/activesupport-3.2.13/lib/active_support/dependencies.rb:251:in `require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/activesupport-3.2.13/lib/active_support/dependencies.rb:251:in `block in require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/activesupport-3.2.13/lib/active_support/dependencies.rb:236:in `load_dependency'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/activesupport-3.2.13/lib/active_support/dependencies.rb:251:in `require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392#global/gems/unicorn-4.6.2/lib/unicorn.rb:103:in `<top (required)>'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/bundler-1.3.4/lib/bundler/runtime.rb:72:in `require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/bundler-1.3.4/lib/bundler/runtime.rb:72:in `block (2 levels) in require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/bundler-1.3.4/lib/bundler/runtime.rb:70:in `each'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/bundler-1.3.4/lib/bundler/runtime.rb:70:in `block in require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/bundler-1.3.4/lib/bundler/runtime.rb:59:in `each'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/bundler-1.3.4/lib/bundler/runtime.rb:59:in `require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/bundler-1.3.4/lib/bundler.rb:132:in `require'
from /home/ma/ts/config/application.rb:16:in `<top (required)>'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/railties-3.2.13/lib/rails/commands.rb:53:in `require'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/railties-3.2.13/lib/rails/commands.rb:53:in `block in <top (required)>'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/railties-3.2.13/lib/rails/commands.rb:50:in `tap'
from /home/ma/.rvm/gems/ruby-1.9.3-p392/gems/railties-3.2.13/lib/rails/commands.rb:50:in `<top (required)>'
from script/rails:6:in `require'
from script/rails:6:in `<main>'
i don't know how could i fix this, to get the rails server command to run again !
any help would be appreciate it !
ps: please tell me if i need to provide more info. Thanks.
Thanks to Jef
creating a new gemset and using it
and after this:
gem install unicorn
fixed the problem with that command :)
You may try to create a brand new gemset (and use it), then bundle install so that Bundler install gems listed in your Gemfile. The stacktrace seems to indicate you're using the global gemset, which is a really bad idea.
I am new to ruby and rails and was working to setup my first mailer, and when I run the generate command my setup is blowing up. I am currently running ruby-1.9.3-p374 and have been searching for awhile now for a fix for this. My other generate commands work fine, just this one seems to be borked. Thoughts?
rails generate mailer UserMailer
/Users/chrishough/.rvm/rubies/ruby-1.9.3-p374/lib/ruby/1.9.1/psych.rb:203:in `parse': (<unknown>): mapping values are not allowed in this context at line 4 column 12 (Psych::SyntaxError)
from /Users/chrishough/.rvm/rubies/ruby-1.9.3-p374/lib/ruby/1.9.1/psych.rb:203:in `parse_stream'
from /Users/chrishough/.rvm/rubies/ruby-1.9.3-p374/lib/ruby/1.9.1/psych.rb:151:in `parse'
from /Users/chrishough/.rvm/rubies/ruby-1.9.3-p374/lib/ruby/1.9.1/psych.rb:127:in `load'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/figaro-0.6.3/lib/figaro.rb:21:in `raw'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/figaro-0.6.3/lib/figaro.rb:17:in `env'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/figaro-0.6.3/lib/figaro/railtie.rb:7:in `block in <class:Railtie>'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/activesupport-3.2.13/lib/active_support/lazy_load_hooks.rb:34:in `call'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/activesupport-3.2.13/lib/active_support/lazy_load_hooks.rb:34:in `execute_hook'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/activesupport-3.2.13/lib/active_support/lazy_load_hooks.rb:43:in `block in run_load_hooks'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/activesupport-3.2.13/lib/active_support/lazy_load_hooks.rb:42:in `each'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/activesupport-3.2.13/lib/active_support/lazy_load_hooks.rb:42:in `run_load_hooks'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/railties-3.2.13/lib/rails/application.rb:67:in `inherited'
from /Users/chrishough/Huedio/Code/Profiles/config/application.rb:27:in `<module:Profiles>'
from /Users/chrishough/Huedio/Code/Profiles/config/application.rb:26:in `<top (required)>'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/railties-3.2.13/lib/rails/commands.rb:24:in `require'
from /Users/chrishough/.rvm/gems/ruby-1.9.3-p374#My-Application-Profiles/gems/railties-3.2.13/lib/rails/commands.rb:24:in `<top (required)>'
from script/rails:6:in `require'
from script/rails:6:in `<main>'
If you are using the figaro gem and your generators start blowing up, here is what killed me. In my application.yml file I had removed a space between the environment variable name and what it was set to. Instead of this =>> MY_VARIABLE:"VARIABLE" I needed to have this ==> MY_VARIABLE: "VARIABLE"
Hopefully this will save others TIME!
I get the following error when I am trying to set this up. I can't figure out what's going on. I'm following Michael Hartl's Rail's tutorial trying to set up for first tests and nothing seems to be working.
C:\rails_projects\sample_app>bundle exec autotest
loading autotest/rspec2
C:/rails_projects/sample_app/.autotest:1:in `require': cannot load such file -- autotest/growl (LoadError)
from C:/rails_projects/sample_app/.autotest:1:in `<top (required)>'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/ZenTest-4.7.0/lib/autotest.rb:315:in `load'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/ZenTest-4.7.0/lib/autotest.rb:315:in `block in initialize'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/ZenTest-4.7.0/lib/autotest.rb:314:in `each'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/ZenTest-4.7.0/lib/autotest.rb:314:in `initialize'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/rspec-core-2.9.0/lib/autotest/rspec2.rb:13:in `initialize'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/ZenTest-4.7.0/lib/autotest.rb:244:in `new'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/ZenTest-4.7.0/lib/autotest.rb:244:in `run'
from C:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/ZenTest-4.7.0/bin/autotest:6:in `<top (required)>'
from C:/RailsInstaller/Ruby1.9.3/bin/autotest:19:in `load'
from C:/RailsInstaller/Ruby1.9.3/bin/autotest:19:in `<main>'
you, probably have a configuration for use growl on your .autotest file.
I think you may need add on your Gemfile the following line:
gem "autotest-growl"