Sorry for bad english.
I have MainViewController and TabBarController with two Views in storyboard.
when i push button (using modal segue) in my MainviewController - app switch to firstTabBarView or secondTabBarView depending on conditions. it works fine but after that i lost my TabBarControls at the bottom of any of my tabBarViews.
UPD: action after bar Button pressed
-(IBAction)barButtonPressed:(id)sender
{
if (condition !=0 ) {
[self performSegueWithIdentifier:#"segue1" sender:nil];
} else {
[self performSegueWithIdentifier:#"segue2" sender:nil];
}
}
It's working as advised. A modal segue is a "fullscreen segue" and covers your standard navigation stack.
If you simply want to change the selected viewcontroller, use
[yourTabBarControllerInstance setSelectedIndex:index];
Related
Here is the problem
1) Rootview controller - MYAssetVC-> Embedded with NavigationController here pushing for button to another Addfilevc.
2) Addfilevc Has dropdownTextfield It will push to another vc have tableview selected row will display in the textfield.
3)if i select another value from the dropdown textfield it will push to the vc again there i will select.
Navigation bar back button will navigate to all my view hierarchy i want to handle this one. if i go to same view it should navigate back only once that to the recent visit how to do this.
As i am new to iOS. give any suggestion.
Navigation from 1->2->3
navigation backbtn 3->2->1
if i navigate like this 1->2->3-> backbutton 3->2 again 2->3 backbutton 3->2 again 2->3
IF i navigate now using back it is displaying all my route path it should navigate like 1->2->3> and 3->2->1 if any number of times i perform actions in 2 & 3.
1,2,3 are view controllers.
Create an IBAction for the back button and use popViewController.
[self.navigationController popViewControllerAnimated:YES];
This will help you to go back one page. You have to write this in all the pages where there is a back button and you want to go back one page.
If you want to go back directly to rootViewController, try this:
[self.navigationController popToRootViewControllerAnimated:YES];
And if you want to pop to any specific viewController in the stack, you run a for loop to find the viewController you want to navigate to and then simply popToViewController, like this:
for (UIViewController *viewController in self.navigationController.viewControllers) {
if ([viewController isKindOfClass:[Addfilevc class]]) {
[self.navigationController popToViewController:viewController animated:YES];
}
}
Hope this helps to clear your concept.
EDIT
In swift:
The [self.navigationController popViewControllerAnimated:YES]; will become self.navigationController?.popViewControllerAnimated(true)
The [self.navigationController popToRootViewControllerAnimated:YES]; will become navigationController?.popToRootViewControllerAnimated(true)
And the for loop will be as below:
You can use this if you are using storyboard
let switchViewController = self.storyboard?.instantiateViewControllerWithIdentifier("view2") as ComposeViewController
self.navigationController?.pushViewController(switchViewController, animated: true)
And the for-in loop
if let viewControllers = self.navigationController?.viewControllers {
for viewController in viewControllers {
self.navigationController!.popToViewController(viewController, animated: true);
}
}
Thanks.
I have one original view controller with four destination view controllers. I want to be able to push segue with a navigation controller to ALL of the destination view controllers from the original. I have tried...
- (IBAction)notificationsButtonPushed:(id)sender {
NotificationsViewController *notifications = [[NotificationsViewController alloc]init];
[self.navigationController pushViewController:notifications animated:YES];
}
- (IBAction)messagesButtonPushed:(id)sender {
MessagesViewController *messages = [[MessagesViewController alloc] init];
[self.navigationController pushViewController:messages animated:YES];
}
- (IBAction)settingsButtonPushed:(id)sender {
if (canMessage) {
SettingsViewController *settings = [[SettingsViewController alloc]init];
[self.navigationController pushViewController:settings animated:YES];
}
else {
NSLog(#"Can't Message");
}
}
- (IBAction)previewButtonPushed:(id)sender {
PreviewViewController *preview = [[PreviewViewController alloc]init];
[self.navigationController pushViewController:preview animated:YES];
}
and this just gives me an empty view controller without my UI components.
Note: I also have tired "initWithNidName:" and passed in the storyboardID of each destination view controller and it gives me Error:
'Could not load NIB in bundle: 'NSBundle </var/mobile/Applications/B7E025E5-D7D2-4FFD-B49C-E10DF5E94C44/LifePoints.app> (loaded)' with name 'preview'
I also have tried... (with storyboard segues set to "Push")
- (IBAction)notificationsButtonPushed:(id)sender {
[self performSegueWithIdentifier:#"notifications" sender:self];
}
- (IBAction)messagesButtonPushed:(id)sender {
if (canMessage) {
[self performSegueWithIdentifier:#"messages" sender:self];
}
else {
NSLog(#"Can't Message");
}
}
- (IBAction)settingsButtonPushed:(id)sender {
[self performSegueWithIdentifier:#"settings" sender:self];
}
- (IBAction)previewButtonPushed:(id)sender {
[self performSegueWithIdentifier:#"preview" sender:self];
}
Although this does push the destination view controllers onto the screen with the appropriate segue type, it does not segue to the correct destination view controller. It only seems to segue to the last attached storyboard segue.
Does anyone know how to correctly apply this and have it behave in the form I am looking for?
EDIT
It is important to note I am checking to see if a condition is met the "messagesButtonPushed" method. I am checking to see if user is allowed to message, and if they are, then segue to the VC.
You don't need any code to implement the basic segues.
In your story board ensure that your original view controller is embedded in a navigation controller (Select the original View and select Edit->Embed in->Navigation Controller).
Then you can simply control drag from each of your four buttons to the corresponding destination views, selecting "push" as the segue type. You can then click on the segue icon between the two views to give each segue an identifier.
You can delete your IBAction methods and any actions on the buttons that link to them.
I suggest you complete a Storyboard Tutorial to learn how storyboards and segues work.
If you do want to perform a segue programatically then you can control drag from the yellow view controller icon at the bottom of the view to the destination. You can then invoke the segue with performSegueWithIdentifier as per your second code - In your case your could have two different segues and trigger the store segue or the other one depending on purchase status
I have this problem:
I have two ViewControllers.
I am transitioning to the second view with Segue.
User enters his name on first view controller and taps on a button. If the text is nil, it should not show the second view controller. If some text is there on the text field - it has to show the next view controller.
I am checking the text length here below. As I have only one segue... I am not checking segue identifier.
And, on Storyboard, I have give modal transition CoverVertical. The animation is not working. View is just appearing. UIModalTransitionStyle also I tried. Still not working (on device and simulator)
-(BOOL)shouldPerformSegueWithIdentifier:(NSString *)identifier sender:(id)sender
{
if(playerNameTextField.text.length == 0)
{
UIColor *tempColor=UIColorFromRGB(0xFF4981);
[self colorizeTextViewForAWhile:playerNameTextField withUIColor:tempColor animated:YES];
return NO;
}
return YES;
}
-(void) prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender
{
if([segue.identifier isEqualToString:#"segueMoveToHome"])
{
ViewController *vc = (ViewController *)segue.destinationViewController;
vc.playerName=playerNameTextField.text;
}
}
Your code works perfectly. I just reproduced and I've got a transition with CoverVertical.
In Interface Builder, select the Storyboard Segue and be sure that you have:
I'm linking you a mini demo with your code that works.
I have removed the Identifier text and continued. As it was the only segue or any other reason... it was working. If I put the segue... it is not working. :| Not sure. But I have now my app working.
I'm coding in Objective-C using XCode 4.6 on a MacBook Pro, and I want to know how to use the same button in my storyboard to get connected to two different screens, I mean, I want to put a condition estructure to decide to which screen the app is going when the user press the button, for example if(x==1) {go to view controller 1} else {go to view controller 2}
Connect segues from your view controller (not the button) in storyboard. Give the button an IBAction and throw your if statement in the implementation of the IBAction:
- (IBAction)buttonPressed:(id)sender
{
if (x == 1) {
[self performSegueWithIdentifier:#"Go to view controller 1" sender:self];
} else {
[self performSegueWithIdentifier:#"Go to view controller 2" sender:self];
}
}
Let me explain. I have multiple UIViewControllers. On my MainPageController, I have 3 UIViews. Let's enumerate it this way: the first UIView is called LoginView, the second is called HomeView and the other one is called RegView. Now in HomeView, there are multiple buttons that will lead to other UIViewControllers. For example, one button will lead to StoreController. Now if I am inside StoreController and I want to go back to MainPageController, I simply call:
[self dismissModalViewControllerAnimated:YES completion:nil]
This will send me back to the HomeView.
That is good. However, inside the StoreController, there are buttons which will supposedly direct me to LoginView or RegView, whichever button was tapped. The problem is when the method [self dismissModalViewControllerAnimated:YES completion:nil], it only take me back to HomeView, no matter which button I pressed.
So how will I display the right UIView once the dismissModalViewControllerAnimated is called?
EDIT:
This is how I show the UIViews:
-(void)viewDidLoad
{
//Initialize the views here...
}
-(void)showViewByTag:(NSInteger)tag
{
if (tag == 1)
{
[self.view addSubview:loginView];
}
else if (tag == 2)
{
[self.view addSubview:homeView];
}
else
{
[self.view addSubview:regView];
}
}
Now I call the method showViewByTag: somewhere in my code to display the views.
What you could try and do is following: before calling [self dismissModalViewControllerAnimated:YES completion:nil] (and thus go back to your home view), change the view currently displayed in your MainPageController:
[(MainPageController*)self.presentingViewController showViewByTag:desiredViewTag];
[self dismissModalViewControllerAnimated:YES...];
If you are worried at the cast and you foresee that self.presentingViewController might be not of MainPageController type on some occasions, then you can check explicitly for its type:
if ([self.presentingViewController isKindOf:[MainPageController class]])
[(MainPageController*)self.presentingViewController showViewByTag:desiredViewTag];
[self dismissModalViewControllerAnimated:YES...];
For this to compile, MainPageController.h must be imported in your modal controller class.
dismissModalViewController will always bring back the viewController which presented it ,and that can be only one,so the ideal way would be to tell the navigationController to initWith your desired viewController..
eg on regButton click in the presented modalview
RegViewController *regViewController = [[RegViewController alloc]initWithNibNam:#"RegViewController" bundle:nil];
[self.navigationController initWithRootViewController:regViewController];