If we have something like this url:
https://www.example.com/Some/Page/index.html?id=15
I know that example.com will be sent as plain text, but /Some/Page/index.html?id=15 is sending securely.
Now, my question is, if we have something like this:
https://somesubdomain.example.com/Some/Page/index.html?id=15
May attackers know that I'm visiting somesubdomain.example.com? or they just can know I'm visiting example.com?
In other words, is subdomain part of url sending securely?
If the client is using Server Name Indication (most modern web browsers/platforms do), the host name (not the rest of the URL) will be visible in clear in the handshake in the server name indication extension, so both www.example.com and somesubdomain.example.com will be visible.
If the client isn't using SNI, an eavesdropper would still see the server certificates and the target IP address(es). Some certificates can be valid for multiple host names, so there may be some ambiguity, but this should give a fairly strong clue to the eavesdropper.
In addition, the same eavesdropper might be in a position to see the DNS requests (unless you've configured the hosts explicitly in your hosts file perhaps).
In general, you shouldn't assume that the host name you're trying to contact is going to be hidden. Whether it's a subdomain isn't relevant, it's the full host name as it's requested by the client that matters.
When using https all traffic between http client and server is encrypted. That does not mean it is safe, but it is encrypted according to what you refer here. Something a network sniffer can see is the ip address you communicate with. That is regardless of what network name had been resolved to that address.
Simply try yourself and use a network sniffer. I recommend wireshark.
Related
I'm trying to figure out whether a website I use was hacked.
When I access the site via www.site-name.com, I'm taken to the website.
However, when I access the site without the "www," i.e. site-name.com, I'm taken to a different website.
Why is this happening? I did a little research and my only guess is that someone changed the site's .htaccess file, but that seems unlikely, as the different website has no relation to the official site.
Can someone help me understand what's going on here?
One IP address can host multiple websites with different hostnames using Virtual Name Hosting.
The HTTP server will look at the Host header in the request to determine what site to use for a given request.
This lets you have one IP address serving example.com and example.net.
Typically, the first Virtual Name Host will be the default, so if you were to ask for example.org the server would not recognise it and give you example.com instead.
In this case, it appears that the server has a Virtual Name Host configured for www.site-name.com but not for site-name.com so requests for site-name.com get the default site for the server.
Lets say I use DNS to configure ftp.mysite.com to my site's IP, I want to give clients the credentials to use the ftp site. Can I give them the URL (ftp.mysite.com) OR should I give then the IP directly (even though the URL points to that IP).
Am I risking compatibility issues of some sort?
Do not use an IP address, always use a domain name. A domain name is less likely to change and carries more information than an IP address.
While a domain name is indeed just an alias to an IP address, a single IP address can be used for multiple domains. This is common with virtual hostings.
In this case, an IP address may not carry enough information. This more common with HTTP, where a domain name, that is otherwise lost in domain-to-IP resolution, is provided to an HTTP server using Host: HTTP header.
FTP protocol has a similar mechanics, the HOST command. But as that command was introduced relatively recently, it is actually quite rare that an FTP server relies on this. Even on shared hostings, a domain is usually included in an FTP username to allow even FTP clients, that do not (yet) support the HOST command.
See also Do the SSH or FTP protocols tell the server to which domain I am trying to connect?
there is no deference. you can give either you IP or your domain name. once people have the domain, they can get your IP very easy.
the domain can be better choice in case the IP is going to be changed.
Most FTP servers are hosted on port 21 (or 22 for SFTP).
ftp.mysite.com usually points to localhost:21 or localhost:22
So there is no difference, except for the ports.
I have a complex web app at example-app.com, hosting fully on AWS using ELB and Route 53 for DNS. It's a Rails app.
I'm running an experiment that I'm using in the rails app, at example-app.com/test. I want to set up new-domain-app.com, to point at example-app.com/test, and have the URL cloacked to always be new-domain-app.com. It's a single page site, so it shouldn't require any navigation.
I'm having a lot of trouble figuring out how to set up my DNS on Route 53 to accomplish this. Does anyone have good ideas on what this Route 53 configuration should look like?
AWS offers a very simple way to implement this -- with CloudFront. Forget about the fact that it's marketed as a CDN. It's also a reverse proxy that can prepend a fixed value onto the path, and send a different hostname to the back-end server than the one typed into the browser, which sounds like what you need.
Create a CloudFront web distribution.
Configure the new domain name as an alternate domain name for the distribution.
For the origin server, put your existing hostname.
For the origin path, put /test -- or whatever string you want prefixed onto the path sent by the browser.
Configure the cache behavior as needed -- enable forwarding of the query string or cookies if needed and any headers your app wants to see, but not Host.
Point your new domain name at CloudFront... But before you do that, note that your CloudFront distribution has a dxxxexample.cloudfront.net hostname. After the distribution finishes setting up (the "In Progress" status goes away, usually in 5 to 20 minutes) your site should be accessible at the cloudfront.net hostname.
How this works: When you type http://example.com into the browser, CloudFront will add the origin path onto the path the browser sends, so GET / HTTP/1.1 becomes GET /test/ HTTP/1.1. This configuration just prefixes every request's path with the string you specified as the origin path, and sends it on to the server. The browser address bar does not change, because this is not a redirect. The host header sent by the browser is replaced with the hostname of the origin server when the request is sent to the origin.
What you are trying to do is not possible. Route53 is a DNS system, and you can not configure a hostname (e.g. new-domain-app.com) to point to URL (e.g. http://example-app.com/test) using DNS.
However, you are probably using a wrong tool for the job. If example-app.com/test is indeed a simple, static, single page site, then you do not need to host it inside Rails app. Instead, you can host it on AWS S3 bucket, and then you can point new-domain-app.com to that bucket using Route53.
See the following for details:
http://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteHosting.html
http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/RoutingToS3Bucket.html
DNS knows about Domains, not url's. DNS simply converts names to IP addresses.
You can't do what you are asking for just using DNS and ELB, however, what you can do is have a seperate VHOST for new-domain-app.com that points to your example-app.com site and accomplishes what you want using some sort of redirection rule that only fires for new-domain-app.com.
I'm not sure that this qualifies as an SO question, and more likely is a serverfault question. Specifics about your webserver and OS platform would be helpful in getting more specific advice.
So here's some details:
You already have example-app.com setup and working
You create a CNAME entry pointing new-domain-app.com to example-app.com or you can make an A record pointing to the same IP. If you already have example-app.com pointing to a different IP address, then use a subdomain (test.example-app.com) to isolate it.
Setup a new vhost on your server that basically duplicates the existing vhost for new-domain-app.com. The only thing you need to change is the server name configuration.
Why does this work? Because HTTP 1.1 included the HOST header that browsers send along, and web servers use in vhosting to determine which virtual host to route an incoming request to. When it sees that the client browser wanted "example-app.com" it routes the request to the appropriate vhost.
Rather than having to do some fancy proxying, which certainly can be used to get to a similar result, you can just add a redirection rule that looks for requests for the host example-app.com and redirects those to example-app.com. In apache that uses mod_rewrite which people often utilize by putting rules in the ubiquitous .htacess file, but can also be done in nginx and other common web servers. The specifics are slightly different for each.
Hi I have a website that I will be developing in the future.
Upon looking at the current website I noticed something weird that I have never seen before and also Google'd and found nothing.
If you go to: http://www.smartrainer.com.au you get the normal site
But, if you go to: https://www.smartrainer.com.au you get redirected to another website and are also given an SSL warning beforehand (in Chrome)
The site is hosted on a UNIX / PHP server and the .htaccess file currently has nothing that would suggest that it's redirecting to this other website.
Any help or insight would be appreciated with this, because I've never heard of this or seen this before.. The client also has no idea why it would be directing to that company that we've never heard of
Thanks!
It sounds like you're using a shared hosting server.
In plain HTTP, the server can know which host the client is requesting using the Host header in the request (this is based on the URL). Apache Httpd supports this with what it calls Name-based virtual hosts.
The HTTPS configuration is separate from the HTTP configuration in Apache Httpd (and presumably a number of other servers). Having virtual hosts (typically on a shared host) for the HTTP configuration doesn't mean that the same configuration is replicated for HTTPS.
HTTPS presents another problem: choosing which certificate to send before being able to see the Host header. Indeed, the server needs to send the client a certificate with the correct name during the SSL/TLS handshake, which happens before any HTTP traffic is sent (so before the Host header can be read). To overcome this problem, some hosts will set up a certificate valid for multiple host names (typically multiple Subject Alternative Names, or sometimes wilcards), others will use Server Name Indication (which isn't supported by all clients).
To get your server to host your site for HTTPS, you'd need:
To make sure the certificate it serves is valid for your host name (otherwise, there will be a warning message).
That the virtual hosts (or equivalent) it serves are configured for your host too.
In your case it seems that (a) your server is serving a single certificate that is not valid for your host and (b) your host isn't configured for HTTPS anyway, since you're falling back to what's probably the default host.
You may solve this issue by redirecting HTTPS URL to HTTP URL from your .htaccess. This error might because of shared hosting. If you cannot solve this issue from your .htaccess than you may also contact your hosting provider on this issue.
Given the following URL: htttp://domain/index.php, where index.php is the main webpage in a joomla server. I want to get the URL with the IP format, http://IP/index.php. I've tried that with several Joomla servers without success. What is it happening?
I will try to keep this answer simple, yet understandable.
The relation between Internet domains and IP address is not necessarily one-to-one.
In shared hosting, a single IP address may be used by several domains (or hostnames).
A Host header, which is a part of the HTTP standard, is sent with the HTTP request. This allows the server to determine which site to serve.
When you are trying to access a domain for which you don't know the IP, DNS lookup is performed, which provides the requested IP address.
A HTTP request is then sent to that IP with a Host header with the hostname (which contains the domain name).
If you are trying to access the ip directly, for example by typing in a web browser's address bar, the value of the Host header will be the IP itself and the server will have no indication what domain you actually want.
It is possible to set up a default behavior for cases where the IP address is directly accessed, but it is highly likely that a shared host will not allow you to set it yourself.