Whenever I open up test.log from any rails application I get the following screenshot in Sublime. I've tried messing around with encodings, but couldn't find anything that fixed it.
Any ideas on what is going on?
These are control characters used to add colour to the log files. Sublime text apparently doesn't support this.
If you're mostly going to be viewing log files with editors that don't understand these colour codes you can turn this off with the rails config.colorize_logging setting
There's a Sublime package to turn these ANSI/vt100 escape sequences into colored text -- SublimeANSI
(use Package Control and look for ANSIescape) -- this adds an "ANSI" file type that will display your log file in glorious color. (The file is displayed read-only but you can change the type back to "Plain Text" if you want to edit it.)
Backing up Tom Hundt's answer... SublimeANSI is the way to go. Compare these before/after shots:
Sublime's default rendering of colorized Rails log output:
Now change the syntax highlighting to ANSI:
Now, marvel in the majesty of SumblimeANSI's rendering:
Learn more about SublimeANSI package at: https://github.com/aziz/SublimeANSI
Note: To install it in Package Manager, search for "ANSIescape" ... NOT "SublimeANSI". This confused me for a hot minute.
Related
Vim noob here. I have code folding working in most places, via indent mode, but for some reason I cannot get Vim to fold .html.erb files in ruby... even with indents.
Here's the relevant region of my vimrc. Is there something else I need to do to make Vim aware of the erb files? Is it possible to customize my folding per file type?
I'm running all the Janus plugins, so have rails.vim, etc. all installed.
let ruby_fold=1
set foldmethod=indent
set foldcolumn=0
set foldlevel=99
nnoremap <space> za<cr>
It's a difficult question, because there's probably something in your vim configuration that inhibits folding and I, for example, can't reproduce it. But I can suggest a few things you could try.
First of all, check what the values of those settings are in the actual buffer. Meaning, open up an erb file and check if the settings are correct. In order to do that, you can type, for example, set foldmethod, which will echo the current value of foldmethod to the screen. If one of the settings doesn't match the ones in your .vimrc, then that might be the problem.
Also, see if the file really does have the "eruby" filetype. If it's not displayed in your statusline, you could check that with set filetype.
Most importantly, one way of customizing settings per filetype is by creating a file with the filetype's name inside the ~/.vim/ftplugin directory. In your case, you can create the file ~/.vim/ftplugin/eruby.vim and put any filetype-specific settings in it. Setting them with setlocal instead of set will keep them local to the file. If it turns out the settings for erb are off, you can "fix" them by putting the values you want there.
I am trying to set some tab indent configurations in Vim. Unfortunately I can't get it working.
In my last line I use
u FileType javascript set tabstop=4
in the hope of having the tab width set to 4.
But when I open a .js file and press tab it inserts only 2 spaces. I tried to comment out the other whitespace stuff without success.
Here is also my full vimrc: https://gist.github.com/919909
How do I set the tabs and so on for Javascript files, and why does the above not work?
Update
The problem seems to be somewhere else as when editing new Javascript files it works as expected. It only seems to behave differently on the Javascript files in my Rails project.
How could that be? I have a Rails.vim plugin installed, could that be the cause?
'tabstop' is the number of spaces a tab character in the file counts for. The number of spaces of an indentation level is set with the 'shitfwidth' option, and the number of spaces that a tab counts for when doing edit operations is set with 'softtabstop'. It's a little complicated, but if you set both 'shitfwidth' and 'softtabstop' to the same value, you'll probably get what you want. You can keep 'tabstop' at the default value.
If you are one of those that like spaces all the time and not tabs, you these settings will probably suit you.
The Rails plugin is probably setting some of these leading to the different behavior you're experiencing.
Ok, the root of the problem seems to be in Rails.vim (see https://github.com/tpope/vim-rails/pull/78)
But there is also this easy solution:
autocmd User Rails/**/*.js set tabstop=4
When I generate a .pdf file from a .tex file using pdflatex, only the "Contents" title is shown with no actual TOC. If I run pdflatex my.tex once more, it generates the TOC just fine. I can reproduce this simply by removing the .toc file. What I think is happening is that my .toc file is being generated too late -- so how can I make the TOC work first time? Should I be generating the TOC beforehand without using pdflatex?
This is normal. LaTeX document need several compilations to reach a stable state. Use rubber -d my to compile the right number of times (rubber comes as a package on many linux distros).
I might be mistaken, but I think, that this is the default behaviour. I assume, you also won't find correct cross references (footnotes, end notes, literature) after the first run of pdflatex.
The point is, that LaTeX needs the extra rounds to resolve the references pointing inside the document, to get numbering and page numbers right.
I experienced the same problem with the editor Latexian. What solved the problem was changing the preferences. I changed "Number of typesetter runs at end" to 3, instead of the default 1. Then I added the "Refresh" button to the toolbar and tried refreshing and it worked.
I'd like to read the Rails 3 source code on printed paper (and preferably in color).
For example, xv6 did a nice job printing their code. It even has line numbers and an index. The only thing I would like to add is syntax highlighting.
Anyone know how any of this is possible?
Here are two possibilities I found:
1. The Listings Package (could this also generate other formats besides PDF, like HTML?)
ftp://ftp.tex.ac.uk/tex-archive/macros/latex/contrib/listings/listings.pdf o
2. Highlight (does it do indexing?)
http://www.andre-simon.de/
We could even add a rake task, print, that generates an up-to-date PDF.
I recomend you use highlight to turn the code into LaTeX and then use Listings to make it into a PDF, then print!
As suggested here, latexmk is a handy way to continually compile your document whenever the source changes. But often when you're working on a document you'll end up with errors and then latex will panic and wait for user input before continuing. That can get very annoying, especially recently when I hacked up something to compile latex directly from an etherpad document, which saves continuously as you type.
Is there a setting for latex or latexmk to make it just abort with an error message if it can't compile? Or, if necessary, how would I set up some kind of Expect script to auto-dismiss LaTeX's complaints?
(I had thought pdflatex's option -halt-on-error would do the trick but apparently not.)
Bonus question: Skim on Mac OSX is a nice pdf viewer that autorefreshes when the pdf changes (unlike Preview), except that whenever there's a latex error it makes you reconfirm that you want autorefreshing. Texniscope doesn't have this problem, but I had to ditch Texniscope for other reasons. Is there a way to make Skim always autorefresh, or is there another viewer that gets this right?
ADDED: Mini-tutorial on latexmk based on the answer to this question:
Get latexmk here: http://www.phys.psu.edu/~collins/software/latexmk-jcc/
Add the following to your ~/.latexmkrc file:
$pdflatex = 'pdflatex -interaction=nonstopmode';
(For OS X with Skim)
$pdf_previewer = "open -a /Applications/Skim.app";
While editing your source file, foo.tex, run the following in a terminal:
latexmk -pvc -pdf foo.tex
Use Skim or another realtime pdf viewer to view foo.pdf. For Skim, just look at the “Sync” tab in Skim’s preferences and set it up for your editor.
Voila! Hitting save on foo.tex will now cause foo.pdf to refresh without touching a thing.
With MikTeX, pdflatex has this command-line option:
-interaction=MODE Set the interaction mode; MODE must be one
of: batchmode, nonstopmode, scrollmode,
errorstopmode.
Edit suggested by #9999years:
Those values are equivalent to a set of LaTeX \commands that provide the same functionality.
From TeX usage tips:
The modes make TeX behave in the following way:
errorstopmode stops on all errors, whether they are about errors in the
source code or non-existent files.
scrollmode doesn't stop on errors in the source but requests input when a
more serious error like like a missing file occurs.
In the somewhat misnamed nonstopmode, TeX does not request input after
serious errors but stops altogether.
batchmode prevents all output in addition to that (intended for use in
automated scripts). In all cases, all errors are written to the log file
(yourtexfile.log).
You can also put \nonstopmode or \batchmode at the very beginning of your tex file; then it'll work with any TeX version, not just pdflatex. For more info on these and related commands see the very good reference on (raw) TeX commands by David Bausum. Especially the command from the debugging family could be of interest here.
Another possible hack is simply to use:
yes x | latexmk source.tex
You could always create an alias for 'yes x | latexmk' if you're going to use this option lots. The main advantage of this that I can see above the other suggestions is that it is very quick for when you occasionally want latexmk to behave like this.
Mehmet
There is also a \batchmode command may do the work.