I’m running Ubuntu 20.04.1 on Hyper-V in Windows 10, and I need to install LibIconv (in order to install ClamAV through a Homebrew package).
When I run brew install clamav or brew install libiconv I get this:
libiconv: is not needed on Linux, where iconv.h is provided by glibc
Error: An unsatisfied requirement failed this build.
So far, I’ve made sure I have all the other dependencies for ClamAV listed here. However, I’m having trouble installing LibIconv. I also made an attempt using these instructions, but I don’t think I was successful because I still get that error above. I'm pretty new to the command line, so I appreciate any help.
I'm looking for an easy way to install Podman in osx.
Are there some brew commands to install Podman?
From the installation information I can see the osx installations is supported via homebrew.
MacOS
Using Homebrew:
brew cask install podman
Update: Use brew install podman as described here.
There won't be any Mac or Windows support (at least not in the near future). Instead, you would have to run podman on a linux-based system and connect to it using varlink. For details, see this blog article.
Running on a fresh install of Ubuntu Server 18.04 on Virtualbox, Windows 10 as the host OS. Ran the instructions on the Phusion Passenger site here
This is the error I'm getting:
steve#heartypet-staging:~$ sudo apt-get install -y libnginx-mod-http-passenger
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libnginx-mod-http-passenger : Depends: passenger (= 1:5.3.4-1~bionic1) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
Oddly enough, the exact same instructions work fine on the desktop version.
Get default source list from here
https://askubuntu.com/a/1036749
Replace /etc/apt/source.list with the file in the link above.
Then sudo apt update and sudo apt upgrade
And go ahead...
If you having problems with the previous solution, one option is run this command:
sudo nano /etc/apt/sources.list.d/passenger.list
and comment all the lines in this file, then run the command
sudo apt-get install passenger
I'm having some trouble installing jekyll. Can't quite figure out how to patch the missing link. I think it's an update to Ruby, but RVM is having trouble installing alternate versions of ruby as well.
Heres the full post:
$ sudo gem install jekyll
ERROR: Error installing jekyll:
ERROR: Failed to build gem native extension.
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby extconf.rb
mkmf.rb can't find header files for ruby at /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/ruby.h
Gem files will remain installed in /Library/Ruby/Gems/1.8/gems/fast-stemmer-1.0.1 for inspection.
Results logged to /Library/Ruby/Gems/1.8/gems/fast-stemmer-1.0.1/ext/gem_make.out
Does this mean I need to update the version of ruby I'm using via rvm?
Ubuntu
sudo apt-get install ruby-dev
gem install jekyll
Your problem is that either you system doesn't know where make is located at or you don't have it installed. The easiest way to fix this (and probably other issues you'll run into trying to get a ruby system up and running) is to install xcode.
You can get it at http://itunes.apple.com/us/app/xcode/id497799835?ls=1&mt=12 for lion. Or it came on a CD with your computer for earlier versions.
If you're using Lion, please see comments below for a link to how to install developer tools on Lion.
I had the same error on Ubuntu and this helped me sort it out.
You must have ruby-dev installed
apt-get install ruby-dev
If you installed XCode and command line tools are still missing go to Terminal and
xcode-select --install
it will prompt you to install these tools. After that just follow SrBlanco´s answer. That solved the problem for me.
Good luck.
Need to install "make".
I am using Ubuntu 12.10.
sudo apt-get install make
Should work on any Debian based distro.
Note: this problem also occurs on newer MacBook Pro models that come with Mavericks pre-installed. I updated another post with my own solution that didn't involve Xcode at all. My system had the Xcode developer tools installed when I got the machine.
ERROR: Error installing jekyll: ERROR: Failed to build gem native extension
Install Xcode as mentioned if you don't have it installed already (https://developer.apple.com/xcode/). Plus you need the command line tools.
Open Xcode. Go to Preferences > Downloads > Install Command Line Tools
Installing command line tools for Xcode solved the problem for me on my Mac
xcode-select --install.
sudo apt-get install ruby-dev
sudo gem install jekyll
hope this will help, it works with me.
I had this same exact error when trying to install Jekyll, and the following steps from this link helped me. Just in case anyone else comes across this!
http://davidensinger.com/2013/03/installing-jekyll/
I was facing the same issue in my Fedora 22 setup. I had ruby installed but didn't have ruby-devel. Installing ruby-devel fixed the issue for me.
dnf install -y ruby-devel
For older systems:
yum install -y ruby-devel
I followed this on Ubuntu/Linux Mint
sudo apt install build-essential
sudo apt install ruby-dev
sudo gem install jekyll
An addendum: You can install XCode now from the App Store on Mountain Lion. The process is transparent and pretty fast.
I had the same problems with you.
I use Mac OS X 10.9 develop preview version, and I had installed gcc and Xcode.
But my Xcode version is 4.6.
Then I install the Xcode 5.0
After that I type sudo gem install jekyll in the terminal again. Then it works.
Wish it could help someone.
Installing Xcode and going to perferencs > downloads > install commandline tools WORKS!
Same problem on Debian, I had forgot to run this command:
~/.rvm/scripts/rvm
All these answers did NOT work for me.
If you're looking for a solution on ubuntu 14.04, do this:
sudo apt-get install ruby1.9.1-dev zlib1g-dev nodejs
sudo gem install jekyll -v 2.5.3
Unfortunately, nodejs is required because of a bug in Jekyll that enforces existence of runtime JS engine even though it doesn't need one.
For Ubuntu, this helped in my case:
apt-get install libffi-dev
A general advice is to just follow what is displayed as the reason for the error and hopefully you'll be provided with a log file in which the first line suggests which package should be installed, in my case:
To see why this extension failed to compile, please check the mkmf.log which can be found here:
/var/lib/gems/2.3.0/extensions/x86_64-linux/2.3.0/ffi-1.9.21/mkmf.log
MacOS
my solution to this problem
install xcode
type xcode-select --install in the command line
type sudo gem install jekyll in the command line
PS: It is the combination of the two answers in this question.
You are missing the ruby-dev file , just go ahead and run this command - sudo apt-get install ruby-dev
Hope this helps!!
I had the same issue on my macOS(10.14.2), the reason may be:
Apparently with OSX el Capitan, there is a new security function that prevents you from modifying system files called Rootless.
My solution is using rvm:
install ruby on Mac OS X with RVM
gem install jekyll
On windows I have this issue
I actually installed the version rubyinstaller-devkit-2.6.3-1-x64 of ruby
I have removed the ruby completely and Installed the rubyinstaller-devkit-2.5.5-1-x64
and issued the following commands on powershell
gem install bundler
gem install jekyll
and this time no errors where found
I had this issue and of all things, the error was occurring because I hadn't agreed to some updated terms of service in xcode. Running the following did the trick for me. Go figure.
sudo xcodebuild -license accept
For me, I had to upgrade homebrew and install rbenv to the latest ruby version. After that, I followed the instruction at jekyll website. My OS is Catalina 2019, I couldn't install Xcode, which is not compatible yet!
You have to set the path in your .bash_profile to make sure that it initializes the rbenv when you restart your terminal.
export PATH="$HOME/.rbenv/bin:$PATH"
eval "$(rbenv init -)"
then
$ rbenv version
2.2.3 (set by /Users/mislav/.rbenv/version)
$ rbenv shell
rbenv: no shell-specific version configured
hope that help!
Here is the (only?) reliable and simple way to install Jekyll on macOS
Install UTM
Install Ubuntu Server
Install Jekyll using Ubuntu instructions at https://jekyllrb.com/docs/installation/ubuntu/
Forward port 22 in the VM settings (22->localhost->22)
Use VS Code on the macOS host
Install Remote SSH
Connect to USER#localhost
Drag and drop the folder on Mac into VS Code (this transfers files to remote)
Enable port forwarding for 4000 (bottom bar on VS Code)
Work on your website
Right click on your website on the file explorer and click download
If you have not done these steps, you might be delighted by:
Ubuntu imports your public SSH key from GitHub
VS Code magically handles file transfer in and out
VS Code magically installs your VS Code extensions onto the remote server and allows file search on the remote host
I am trying to get a development environment up and running. I installed virtualbox and then used vagrant with the hashicorp/precise32 box. I access the VM through ssh and am trying to install the latest version of ruby.
I pasted
wget -O ruby-install-0.5.0.tar.gz https://github.com/postmodern/ruby-install/archive/v0.5.0.tar.gz
tar -xzvf ruby-install-0.5.0.tar.gz
cd ruby-install-0.5.0/
sudo make install
into the command line from https://github.com/postmodern/ruby-install#readme
The prompt shows sudo make install and when I hit enter I get a message that says "sudo: make: command not found."
What am I doing wrong?
I know there are boxes with ruby already setup but I wanted to go through the process myself so learn a bit along the way.
A separate issue I came across was that this box has an outdated version of ubuntu. When I try to upgrade it warns me not to do it over SSH. Is there a better way?
Thanks
Maybe you don't have make installed on Ubuntu. You can install the package build-essential which will install make and other building tools.
sudo apt-get install build-essential
also, here's a good reference on installing Ruby, Ruby on Rails, and other tools on Ubuntu.