I'm trying to look at a string and reject anything that has seq= or app= in the string. Where it gets tricky is I need elements with q=something or p=something.
The seq= part of the string is always preceded an & and app= is always preceded by a ?
I have absolutely no idea where to start. I've been using http://www.rubular.com/ to try and figure it out but to no avail.
Any help would be hugely appreciated.
Based on your question, I believe you could just reject any strings that match the following expression:
[\?&](?:seq|app)=
This will match any string that contains a ? or & followed by either app= or seq=. The ?: inside the parentheses just tells the regular expression not to bother to capture matching groups as sub-matches. They're not really necessary, but what the heck.
Here's a Rubular link with some samples.
Related
Hi I've been struggling with this for the last hour and am no closer. How exactly do I strip everything except numbers, commas and decimal points from a rails string? The closest I have so far is:-
rate = rate.gsub!(/[^0-9]/i, '')
This strips everything but the numbers. When I try add commas to the expression, everything is getting stripped. I got the aboves from somewhere else and as far as I can gather:
^ = not
Everything to the left of the comma gets replaced by what's in the '' on the right
No idea what the /i does
I'm very new to gsub. Does anyone know of a good tutorial on building expressions?
Thanks
Try:
rate = rate.gsub(/[^0-9,\.]/, '')
Basically, you know the ^ means not when inside the character class brackets [] which you are using, and then you can just add the comma to the list. The decimal needs to be escaped with a backslash because in regular expressions they are a special character that means "match anything".
Also, be aware of whether you are using gsub or gsub!
gsub! has the bang, so it edits the instance of the string you're passing in, rather than returning another one.
So if using gsub! it would be:
rate.gsub!(/[^0-9,\.]/, '')
And rate would be altered.
If you do not want to alter the original variable, then you can use the version without the bang (and assign it to a different var):
cleaned_rate = rate.gsub!(/[^0-9,\.]/, '')
I'd just google for tutorials. I haven't used one. Regexes are a LOT of time and trial and error (and table-flipping).
This is a cool tool to use with a mini cheat-sheet on it for ruby that allows you to quickly edit and test your expression:
http://rubular.com/
You can just add the comma and period in the square-bracketed expression:
rate.gsub(/[^0-9,.]/, '')
You don't need the i for case-insensitivity for numbers and symbols.
There's lots of info on regular expressions, regex, etc. Maybe search for those instead of gsub.
You can use this:
rate = rate.gsub!(/[^0-9\.\,]/g,'')
Also check this out to learn more about regular expressions:
http://www.regexr.com/
I'm having difficulty working out the best way to parse identifiers that have different characters at the start and end. For example, let's say that the start characters of our identifiers may be upper and lowercase only, while the middle of an identifier may also include digits and colons. The end of an identifier may not be a colon, but may be an apostrophe.
So the following are all legal identifiers:
f, f0, f:', f000:sdfsd:asdf
But the following are not:
0, hello:, he'llo
I can't see how best to handle the backtracking: a colon is fine in the middle, but we need some lookahead to determine whether we are at the end of the identifier.
EDIT:
Thanks for the suggestions. Using a regex is a pragmatic approach, but I find it slightly disappointing that there doesn't seem to be clean/obvious way of doing this otherwise.
I also think you should use regex, however I came up with a different pattern:
let pattern = regex #"^([a-zA-Z]+[a-zA-Z0-9:]*[a-zA-Z']?)$"
which will hold all of your wanted Matches in the first group. You can use an online RegExp tool to validate your matches/grouping.
You can handle this with a regex parser
let ident = regex #"[A-Za-z][A-Za-z0-9\:]*[A-Za-z0-9\']"
http://www.quanttec.com/fparsec/reference/charparsers.html
I can't figure out what does this regex match:
A: "\\/\\/c\\/(\\d*)"
B: "\\/\\/(\\d*)"
I suppose they are matching some kind of number sequence since \d matches any digit but I'd like to know an example of a string that would be a match for this regex.
The pattern syntax is that specified by ICU. Expressions are created with NSRegularExpression in an iOS app and are correct.
The first matches //c/ + 0 or more digits. The second matches // + 0 or more digits. In both the digits are captured.
An example of a match for A) is //c/123
An example of a match for B) is //12345
When I use Cygwin which emulates Bash on Windows, I sometimes run into situations where I have to escape my escape characters which is what I think is making this expression look so weird. For instance, when I use sed to look for a single '\' I sometimes have to write it as '\\\\'. (Funny, StackOverflow proved my point. If you write 4 backslashes in the comment, it only shows two. So if you process it again, they might all disappear depending on your situation).
Considering this, it might be helpful to think of pairs of backslashes as representing only one if you're coming from a similar situation. My guess would be you are. Because of this I would say Erik Duymelinck is probably spot on. This will capture a sequence of digits that may or may not follow a couple slashes and a c:
//c/000
//00000
This regex matches an odd sequence of characters, which, at first glance, almost seem like a regex, since \d is a digit, and followed by an asterisk (\d*) would mean zero-or-more digits. But it's not a digit, because the escape-slash is escaped.
\\/\\/c\\/(\\d*)
So, for instance, this one matches the following text:
\/\/c\/\
\/\/c\/\d
\/\/c\/\dd
\/\/c\/\ddd
\/\/c\/\dddd
\/\/c\/\ddddd
\/\/c\/\dddddd
...
This one is almost the same
\\/\\/(\\d*)
except you just delete the c\/ from the above results:
\/\/\
\/\/\d
\/\/\dd
\/\/\ddd
\/\/\dddd
\/\/\ddddd
\/\/\dddddd
...
In both cases, the final \ and optional d is [capture group][1] one.
My first impression was that these regexes were intended for escaping in Java strings, meaning they would be completely invalid. If the were escaped for Java strings, such as
Pattern p = Pattern.compile("\\/\\/c\\/(\\d*)");
It would be invalid, because after un-escaping, it would result in this invalid regex:
\/\/c\/(\d*)
The single escape-slashes (\) are invalid. But the \d is valid, as it would mean any digit.
But again, I don't think they're invalid, and they're not escaped for a Java string. They're just odd.
I am attempting some pattern matching in Lua and have hit a small problem. I am trying to match everything from the first newline character in my data up to the following pattern _\x0C.
here is the code that has the problem:
configmatch = string.match(response, "\n(.+)(['_\x0C'])")
it seems to be working some of the time, other times it is "cutting short" the expected output. the problem is probably to do with this: (['_\x0C']) but i have been unable to resolve it. Does anyone know how to fix this?
If you want _\x0C literally in the string, you need to use "\n(.-_\\x0C)". If you mean underscore followed by formfeed, use "\n(.-_\012)", because there are no \x escapes in Lua (5.1).
Could anybody help me make a proper regular expression from a bunch of text in Ruby. I tried a lot but I don't know how to handle variable length titles.
The string will be of format <sometext>title:"<actual_title>"<sometext>. I want to extract actual_title from this string.
I tried /title:"."/ but it doesnt find any matches as it expects a closing quotation after one variable from opening quotation. I couldn't figure how to make it check for variable length of string. Any help is appreciated. Thanks.
. matches any single character. Putting + after a character will match one or more of those characters. So .+ will match one or more characters of any sort. Also, you should put a question mark after it so that it matches the first closing-quotation mark it comes across. So:
/title:"(.+?)"/
The parentheses are necessary if you want to extract the title text that it matched out of there.
/title:"([^"]*)"/
The parentheses create a capturing group. Inside is first a character class. The ^ means it's negated, so it matches any character that's not a ". The * means 0 or more. You can change it to one or more by using + instead of *.
I like /title:"(.+?)"/ because of it's use of lazy matching to stop the .+ consuming all text until the last " on the line is found.
It won't work if the string wraps lines or includes escaped quotes.
In programming languages where you want to be able to include the string deliminator inside a string you usually provide an 'escape' character or sequence.
If your escape character was \ then you could write something like this...
/title:"((?:\\"|[^"])+)"/
This is a railroad diagram. Railroad diagrams show you what order things are parsed... imagine you are a train starting at the left. You consume title:" then \" if you can.. if you can't then you consume not a ". The > means this path is preferred... so you try to loop... if you can't you have to consume a '"' to finish.
I made this with https://regexper.com/#%2Ftitle%3A%22((%3F%3A%5C%5C%22%7C%5B%5E%22%5D)%2B)%22%2F
but there is now a plugin for Atom text editor too that does this.