I have one domain class which has one numeric field. Default scaffolding generated it. When I enter a number with more than 3 digits, ex:- 1234, then in show.gsp and list.gsp it shows as 1,234. My requirement is to show the number without comma. I can't use g:formatNumber because I have more than 50 domains and not able to use this tag for every gsp page. Is there anything I can do to change the number pattern globally?
thanks
maybe solution suggested here can be useful
Get the field directly like:
<td valign="top" class="value">${formulationTypeInstance?.id}</td>
Of course you may lose some of the tag's features with it, like highlighting field when a validation error occurs. But you're in show.gsp and it shouldn't have text fields or something to submit, so you lose nothing! Simple is the way to go here. =)
Related
Hello i need some help with shopware.
My question is probably pretty basic but i cannot get it done. I want to print out attributes from an article. In shopware documentation they call them {$sArticle.attr1} till {$sArticle.attr20} but they can also have different names so i cannot refer directly to the name and instead i want only a few attributes to be printed.
so far i know that all attributes are stored in the s_articles_attributes database table and i only want to print out those columns when the column name containes='artikelattribut_'
The code is going to be implemented in a table from frontend/detail/tabs --> description.tpl
the actual table already uses the $sArticle.sProperties and the code looks the following:
{if $sArticle.sProperties}
<div class="product--properties panel has--border">
<table class="product--properties-table">
{foreach $sArticle.sProperties as $sProperty}
<tr class="product--properties-row">
{* Property label *}
{block name='frontend_detail_description_properties_label'}
<td class="product--properties-label is--bold">{$sProperty.name|escape}:</td>
{/block}
{* Property content *}
{block name='frontend_detail_description_properties_content'}
<td class="product--properties-value">{$sProperty.value|escape}</td>
{/block}
</tr>
{/foreach}
</table>
</div>
{/if}
The thing is that $sArticle.sProperties and {$sArticle.attr1} till {$sArticle.attr20} are different. All i want is a second {foreach} that loops threw all article attributes maybe the idea is getting clear with that:
{foreach $sArticle.attr FROM s_articles_attributes WHERE name contains='artikelattribut_'}
I hope somebody understands my problem. Thankfull for any advice.
Thanks
First, keep in mind, that "properties" and "attributes" mean something different in Shopware as you might know it from other shop systems.
"Properties" are used for characteristics of a product, like the taste or colour of product.
"Attributes" in Shopware do not have anything to do with attributes in the usual meaning. You can find those *_attributes tables for almost every entity and they are used more like custom fields or columns which you could add to the entities to extend them with custom data.
Now back to your problem. Try this:
{foreach $sArticle.attributes.core->toArray() as $attributeName => $attribute}
{$attributeName|var_dump}
{$attribute|var_dump}
{/foreach}
There are two ways to access the attributes of a product.
All attributes are directly assigned to the $sArticle variable and you can use them, as you already described in your text.
Attributes are also stored in $sArticle.attributes where you can find different types of attributes. By default those are core and marketing for products on the detail page. Be aware that the values of those keys are objects of type Shopware\Bundle\StoreFrontBundle\Struct\Attribute. That's why we need to call the toArray method, to get an array which we can iterate.
I have a page that is a report from a database and I'm working on modifying how the filtering works. The intention is to allow the user to select possible values form a list that will be used to filter the resulting report. There are too many values to do this with checkboxes. I'm defining a multiple selection list box with this:
<g:select name="country" from="${countryDataList.KOUNTRY}" value="${params.country}" multiple="true" />
countryDataList is a List<> of objects with a name and a value which I create in the controller. I'm able to get the selected counties and process them without an issue.
But when the page returns from the controller with the filtered report, only the first selection in the list is selected. It doesn't re-select all of the items that the user selected. I am passing the params.country object back from the controller as
country:params.country
I saw some posts about this not working, but they are all from several years ago. Am I missing a vital step?
Ahh sorry, I was reading it on the phone initially and missed the point.
So what you want is a way of sending a multiple select box to a confirmation page. If I understand correctly?
Anyways how many objects in the select are we talking massive or a dozen couple of dozen or so ?
What I did was use check boxes and did a confirmation which shows the selection ticked in check boxes.. So this is the confirmation page that loads in https://github.com/vahidhedayati/mailinglist/blob/master/grails-app/views/mailingListEmail/confirmcontact.gsp
this page which is where multiple attachments selected from the schedule re-appear...
https://github.com/vahidhedayati/mailinglist/blob/master/grails-app/views/mailingListAttachments/_mailerAttachmentsDisplay.gsp.
Please note advice below is all conceptual stuff and there may be easier ways than this
Other than that You could create a taglib call on the confirmation page https://github.com/vahidhedayati/ajaxdependancyselection/blob/master/grails-app/taglib/ajaxdependancyselection/AutoCompleteTagLib.groovy#L55 which takes in your arrayList you could probably convert it to JSON pass it into the javascript that you load in within the taglib (on mine further down it loads this page in)
https://github.com/vahidhedayati/ajaxdependancyselection/blob/master/grails-app/views/autoComplete/_selectJs1.gsp#L23
and look to reselect them using javascript... as I say I haven't tested the last bit, the first bit i.e. checkbox works it is/has been in use.
Years later from you I just had the same problem. What I figured out is: it happens when params.country is an array instead of a Collection (i.e. an ArrayList).
A workaround for this if you want to stick to the array type is at the value attribute of the tag doing this: params.country?.findAll().
I am using struts-2.3.16.3 for my application. My action implements the “ModelDriven” interface. Using interceptor reference as defaultStack.
The problem that i am facing is, all the special characters (non keyboard characters like ®, ℗) are disappearing from my model property by the time they reach to my action class. Other special characters like # # $ etc able to see those in my action.
Do i need to configure any other interceptors in the stack?. Help needed if i am missing in configuration.
Example: If i enter Piracy℗symbol in my text field, in action class when i print property value it shows Piracysymbol.
Thanks,
Ramesh
I think the problem is that you have not mentioned the content-type. Try putting
<%# page contentType=”text/html;charset=UTF-8″ %> tag in your code if you haven't already. If the problem still persists write your code like this
<s:text name="username"/> <s:property value="getText('username')"/>
Hope this helps.
I've noticed in some php applications, that form fields are labelled with [] in them.
Say a shopping cart page, that lists all the items where you can edit the quantity.
is the [] type naming used to get the correct row?
Just trying to figure out how I should name each textbox?
should it be like:
name="quantity-<%= items.RowId %>"
THen when I loop the form fields, I would get the index number?
This is done in PHP when you need to pass <select multiple="multiple"> to the server, otherwise PHP will catch only the first selected value.
Textboxes don't normally require such naming.
This might answer a few of your questions. Here, Phil Haack uses square brackets in order to bind to a model that contains a list.
Is it mandatory in struts2 to use struts-tags. I mean can't we use following:
<td bgcolor="DEDBC6"><div align="left"><font color="#000000"><strong>
Employee Name * :</strong></font></div></td>
<td><input name="empname" type="text" id="empname" size="32"></td>
instead of following:
<s:textfield label="Employee Salary " name="empsal" required="true"/>
I had tried both but when i used 1st i didn't get validation message i.e "empname is required" that i wrote in action-validation.xml although validation is working well.
please comment ?
No, it is not mandatory. In fact a lot of struts2 users are sufficiently dissatisfied with OGNL and choose to use regular HTML instead.
But using the standard HTML tags has the drawback of loosing some functionality, after all that's why the custom tags are there in the first place. It is possible to get validation through validate methods on the controller class even with standard HTML.
If you are just starting out with the framework I suggest you learn the struts tags properly before going off the beaten path.
Is it mandatory in struts2 to use struts-tags.
No, but if you aren't using tags at all then you're not really getting very much out of Struts as a framework. Might as well do it yourself.
i didn't get validation message
If you're using your own markup you'll have to tell it to display the error message. eg.:
<s:fielderror><s:param>empcode</s:param></s:fielderror>
please comment ?
Please stop asking the same questions over and over again.
I don't see why you need any tags at all. Couldn't you just use Struts to generate JSON result types and then use calls to those in your otherwise static jsp pages using JavaScript and JQuery?