I recently added the iOS-Charts framework to my Xcode Project. The project would build before I added the framework to my project, but will not afterwards. I am not even using any of the framework's features yet, it is not imported anywhere, I have just added it in embedded binaries according to the instructions here.
The build fail message: could not read data from .../AppName/Supporting Files/Info.plist': The file "Info.plist" couldn't be opened because there is no such file.
This does not make sense because nothing has been moved and if I remove the framework from the embedded binaries section the project does build.
Help will be much appreciated, thank you.
The error message has said clearly: The file "Info.plist" couldn't be opened because there is no such file. When you see this, double check the Info.plist file in your disk, to make sure it does exists.
If you removed the library and it start building again, it's more like the Info.plist is modified but broken. You may want to google and do some testing, like creating a new project and import the library to give a try. If the new project has the same issue, file an issue on its github page.
Turns out the project file for iOS Charts was moved when I was setting it up. The project file had to be dragged into the Xcode interface, not actually moved into the project directory.
I have met the same problem with you, as it said "no such file", and it provides the path of it. So I realized that I forget to copy "Supporting Files" to folder.
Notice the file in this screenshot:
the missing Info.plist
Then in your project: TARGET -> Building Settings -> Packaging -> Info.plist File
By the way, due to the bug of Xcode, you should build before import Charts.
Good Luck!
I have a problem generating a iOS App archive from an application. The application compiles just fine and even works in the simulator. Now I wanted to make som ad hoc testing and cannot generate the iOS App Archive. When I click on the Product -> Archive it generates a generic xcode archive. Can anyone help me. I should mention, that I have already generated an iOS App Archive of this application. It has just stopped to generate iOS Archive for some reason. Thanks a lot.
Check Build Settings:
Skip install is NO for the main project target
Skip install is YES for framework (sub-projects) targets
In Build Phases for sub-projects, Copy Headers needs to be in Project, not Public (does not apply if building static library)
Installation Directory under Deployment is valid (/Applications for example)
This can happen if you've added a framework/library ... you need to edit the Target->Build Settings of that library and set the 'Skip Install' setting to 'Yes'. When you re-archive, XCode should start producing a 'iOS App Archive' again rather than a 'generic xcode archive'.
In addition of Skip Install to Yes and in case you opened another lib/framwork project within your app project you have to move headers (if any) from public to project in the Build Phase / Copy Headers.
I did the following to make it work for me:
I had a three20 static library, I used cocoapods to include the files within the main project
followed the skip install for all other sub projects/static libraries and switched the copy headers from public to project as stated above
most importantly: in each library your project uses go to build phases -> Copy Files and ensured that destination is changed from Absolute path to products directory. Note: see the hint below to narrow your search to find the library causing this error.
and that was it!
hint: to get an idea of the offending files that's causing your archive to create an archive file rather than an ipa do this:
Select the archive and click the Distribute button.
Select the 'Save Built Products' option.
Hit Next and Save.
Browse the created directory in Finder.
The 'libraries' subdirectory will identify the libraries that you need to set the Skip Install to Yes.
in some cases usr/local/include will identify the culprit header files you need to move from Public to Project or the files that you have to change from absolute path to products directory (or even the files you forgot to set the skip install to yes flag). but that directory (ie usr/local/include) varies depending on your sublibrary directory structure. In many cases.. you will see all the files listed under Copy Files in step 3 above listed here. If you find them here, then you have a definite answer for the cause of your problem.
update to hint: to make life even more simpler.. whatever files appears under step 4 in hint above.. simply search for it in the global search of xcode.. and you should get immediate results for what you want.. for example, this was the content of my folder (following the steps in hint above):
So I could tell it has something to do with the crypto and ssl libraries.. searching for them:
made me realize that i forgot to set skip install to yes.
If you export the archive, open it and see /urs/local/include in Products try this suggestion:
In each pod, under Packaging, Private Headers Folder Path and Public Headers Folder Path is set to /usr/local/include. If I clear them then I get a valid archive.
Worked for me after upgrading my React Native app to 0.11.0, Xcode 7 and CocoaPods 0.39.0.beta.4.
If you're using CocoaPods as well as WatchKit or a Today Extension, there is an open issue on the CocoaPods repo explaining what your problem might be.
The solution for me was to remove the Copy Pod Resources phase from the WatchKit Extension and Today Extension targets under Build Phases. The project compiled and archived as expected once I did this.
Hope this helps someone, this had me stumped for an entire day!
If any of the above answers don't work, your issue is probably with cocoaPods. The latest update 0.38.1 messed things up for me, but then i downgraded to 0.37.1 and things returned to normal. Using Xcode 6.3.1
Later edit: updating to 0.38.2 will also fix this. More info about what caused this issue here: Cocoapods 0.38.1 failed to create valid Archive
Although I'm using Xcode5 and what sorted it for me was editing the Build Scheme - trying all of the above suggestions that were applicable didn't help in my case.
I had two targets, say, "App" and "App FREE". My problems with the generic archive happened when I was trying to Archive the FREE version, which I added after the 'normal' version of the app. In my case, when I selected its Scheme in the toolbar and chose Edit Scheme ... I saw that Build section had two targets, namely App and App FREE.
I unchecked all columns for App, leaving only App FREE's columns checked, and clicked OK. Next time I chose Product > Archive I got my App FREE instead of a Generic Archive. :)
If you have only single project, maybe this solution would be useful.
This problem had occurred, when I duplicated the target. As a result I had two targets parallel built. This was causing the issue. Generic IOS archive was built.
To turn the parallel built off go to
Manage schemes,
Edit scheme,
Build,
Remove the other target.
I had this problem after updating to iOS 9 and Xcode 7. Josh H's solution worked for me:
In each pod, under Packaging, Private Headers Folder Path and Public
Headers Folder Path is set to /usr/local/include. If I clear them then
I get a valid archive.
I also made a post install script for my Podfile to do this automatically!
post_install do |installer_representation|
installer_representation.pods_project.targets.each do |target|
target.build_configurations.each do |config|
config.build_settings['PUBLIC_HEADERS_FOLDER_PATH'] = [""];
config.build_settings['PRIVATE_HEADERS_FOLDER_PATH'] = [""];
end
end
end
Just add it to the bottom of your Podfile and run pod install
I had this issue. In my case, it was caused by keeping a Mac app target as a dependency of the iOS app.
The reason it was setup like this was that the Mac app was a tool used to generate some data for the iOS app, which was then included in the bundle.
I had to remove that dependency and build the tool separately before making a build of the iOS app itself.
In my scenario I was getting the erroneous "Generic Archive" only after I began including Swift code in my predominantly Objective-C project. After lots of troubleshooting and examination of the archive file that Xcode was spitting out, I noticed that the SwiftSupport folder (with the required dylibs for the Swift runtime) was in a different place in my archive than from a vanilla brand-new Swift project app archive.
I found the Installation Directory build setting and noticed it was set to a custom path in my project. I simply deleted it (setting it to its generic value of /Applications) and the next Build -> Archive I did worked as expected and gave me a proper iOS App Archive.
TL; DR: Make sure your Installation Directory build setting is set to its default value of /Applications when including Swift code in your app, especially if you are starting with an older project file that may have some unexpected legacy build settings.
I have multiple project in my workspace, (GTL, Pods and my main project) and this is what worked for me:
Select the Project, there will be 2 types there, there's the Project and there's the Targets.
For projects that is not your main like GTL or PODS:
Projects:
Skip Install = NO
Installation Directory = /Applications
// For pods
Private Headers Folder Path = ""
Public Headers Folder Path = ""
Targets:
Skip Install = YES
Installation Directory = /Applications
// For pods
Private Headers Folder Path = ""
Public Headers Folder Path = ""
For the main project (which is usually named the same as your product name):
Projects:
Skip Install = NO
Installation Directory = /Applications
Targets:
Skip Install = NO
Installation Directory = /Applications
Check the ios deployment target on each projects and targets to make sure they are all the same.
Leaving this here to save others from the same journey.
I found I needed to remove the same Copy Pod Resources build phase from a static library target in my workspace too.
Addition to Alex L 's answer.
Point 3. Change 'Build Settings' -> 'Public Header Folder Path' to 'include/xxx' also works.
If none of the above helped you...after a lot of time.......
I deleted the value in the Info.plist for Bundle Version because I was happy enough with just Bundle Version Short 1.0. Bad. Don't do this.
*Note I actually did this by editing it in the UI on the right not realizing it would put an empty key in the Info.plist file. I think that makes it invalid. My bundle showed up as other items while archiving and had no icon, and I couldn't upload to anywhere.
This boils down to invalid values in the Info.plist. If it's not a valid archive, try unzipping an old archive and dropping in / overwriting your current one and see if it fixes it when rebuilding the archive.
Go to Build Settings and add
yourAppName/Resources/dist.plist to the Code Signing Entitlements
Press cmd + B with iOS Device or a Real Device selected as Build Target
When done -> scroll to "Products" folder and right-click on yourAppName.app
Choose "Show in Finder"
Create a folder with Name Payload (capital "P")
Copy yourAppName into your Payload Folder
Create a zip from your Payload Folder
Rename the zip to yourAppName.ipa
DONE
After trying just about everything:
Clean, Archive
delete DerivedData, Archive
restart Xcode (I was using XCode7), Archive
combinations of above...
I then noticed my boot partition was 'low on free disk space'... about 1GB or so.
I rebooted, then got about 18GB free.
Then opened Xcode and project, performed Archive... and surprisingly (after an hour of trying to build an Archive) I finally got a non Generic Archive.
No idea if its a free disk issue which fixed it or a reboot of the macOS that fixed it, but it worked for me.
If you have any .xcodeproj files in Project>Targets>Build Phases>target dependencies remove it from there and then build your ipa. It works for me. Cheers
You can get answer here : xcode is creating generic xcode archive instead of iOS App Archive
In my case, i had to move both FMDB and BlocksKit to static libraries. Previously they were built as subprojects. Remember you can use lipo to create universal libraries. When building the final products, the simulator code will be stripped automagically.
Another possible reason for this is to have references in "Target Dependencies" to projects for a different platform. In my particular case, I was working on a project that shares code for OSX and iOS. In one of the iOS targets, I had accidentally added an OSX target as dependency.
In order to be thorough, I am posting my solution.
I experienced the exact same problem trying to build an Archive of an iOS project in Xcode 5.1.1 (5B1008). None of the above suggestions fixed the problem, and most of them were irrelevant (I had not added any Frameworks, and did not have any Public entries in the Copy Headers section of my Build Phases).
In my case, fixing the problem consisted of simply closing my project, deleting any archives that I had previously made, going to Preferences > Accounts, removing my developer account, quitting Xcode, relaunching, re-adding my developer account, starting the Archive process again. This fixed my problem immediately.
One more solution, since all the above didn't work for me...
Changed the User Header Search Paths (I suppose Header Search Paths would work just as elegantly) to "$(BUILT_PRODUCTS_DIR)/BlocksKit".
Background:
In BlockKit, the developers have structured the headers in the main project differently than the structure on deployment. So, you can't reference the headers in the project, and must reference the headers copied into the build directory.
The way this worked for me in (Xcode 5) I had 2 targets and when I edited the scheme, on the left pane of the scheme editor, you will see the [BUILD, RUN, TEST, PROFILE XXX.APP, ANALYZE, ARCHIVE] from the BUILD pane, you will see your project targets listed in a list. At the far right end you will see the ARCHIVE selections, make sure only one target is selected for archiving.
I had 2 of my targets selected in my project, I checked only the target I wanted in the product, and it worked!
I solved this error by opening solely the app project in XCode, ie. not opening a workspace comprising the application and other projects/libraries/frameworks.
Having 2 separate project, a framework or shared library and an iOS application, I had to open 2 different XCode windows, each by directly opening the .xcodeproj file instead of the common .xcworkspace, in order to preperly build each.
As a nice side effect, XCode no longer rebuilds every target of every project after I do a Clean, resulting in shorted build times.
Background: I am creating an open source SDK, and a demo iOS application. I had both opened in a single workspace.
Setting Skip install to YES on the SDK targets would prevent anyone from creating an archive, as it would be empty, so this was not an option. Using Project instead of Public headers would lead to an archive missing the header files that should be distributed, so this was not an option either.
For it was because i was working in a workspace.
The project did archived but would ne be displayed in the organizer window.
I closed the workspace and open the project on its own.
The archived has been opened in the organizer ... hope it's help.
In my case, I had a custom script that was copying some temporary files into:
${TARGET_BUILD_DIR}/myTempDir
That meant that, after investigating the archive to inspect its contents, I found right next to the .app file a myTempDir folder. Once I modified the script to save elsewhere things were sorted.
Try setting $(PROJECT_NAME)Headers in Framework projet's Public Headers Folder Path. You have to go to build settings of the Library Target then edit the Public Headers Folder path as $(PROJECT_NAME)Headers.
If using Xcode 7 with cocoapods v.0.38.2. Try removing copy pod resources from your today extension target.
I encountered this problem after adding a OS X command line tool to my iOS app's project, and Skip Install was set to NO by default for the command line tool's target. Since you obviously can't install an OS X binary to an iOS device, archiving defaulted to a generic Xcode archive. Setting Skip Install to YES for this target fixed the problem.
I am working on a different iOS project in Unity and I have built it by exporting to Xcode (like I always have).
Whenever I try to open the "Unity-iPhone.xcodeproj" in Xcode, it gives me the following error:
Project cannot be opened because the project file cannot be parsed.
I have looked everywhere but cannot figure it out.
The project name does not have any spaces in it.
I have checked the .plist and everything looks fine.
The bundle identifier matches that in .plist.
This has worked in previous projects but now I am getting this error for some reason. What gives?
Today, I've been facing this problem (Unity Ver. 5.5 Windows Based system).
When I try to open my windows exported iOS project, i got "(..)the project file cannot be parsed". So, I decided to explore the project file, located in:
{Project path}/Unity-iPhone.xcodeproj/project.pbxproj
It is a plain text file, so you can use any text editor.
I found a line with a mismatched quotes. It was:
shellScript = "\"$PROJECT_DIR/MapFileParser.sh\""\nrm -rf \"$TARGET_BUILD_DIR/$PRODUCT_NAME.app/Data/Raw/QCAR\"";
To fix the problem, simply remove the quotation mark located at:
(...)MapFileParser.sh\" " \n(...)
It should be:
(...)MapFileparser.sh\" \n(...)
and it will be parsed correctly in xCode.
It's an automated typo error!
Good luck!
Well, after a couple days I have found the problem and it all has to do with the naming of the *.a files that the plugins import.
XCode does not allow for files to have spaces in their names (of course) but I had not caught that 3 of the *.a files from plugins had spaces in them.
After removing these plugins (I have different plugins that do the same thing anyways) xCode was able to parse the build and create a project for me!
Be careful of spaces!
Incompatable version of Xcode?
Are you using plugins? Most modify the project.
Try creating a new project and creating a build. If it works, it's a plugin, otherwise an Xcode version.
Faced the same issue today (Unity 2017.1.1).
Nothing related with the answers above. I just made a mistake in the Profile ID in the Player Settings of iOS : Edit > Project Settings > Player > iPhone, iPod Touch and iPad Settings > Other Settings > Identification.
I was getting this issue in Unity 2017.2 this week (building on Windows and then copying the build files over to the Mac for use in Xcode), and can confirm that the fix to the shell script line to remove the double quote as described by Anibal Itriago above worked in my case. Even an entirely blank iOS project with Vuforia disabled was failing to parse, but the line fix seems to resolve it.
My issue was related to dropbox.
I use a pc for development and a mac to build in xcode, so I store my project in dropbox. Sometimes dropbox can corrupt .pbxproj or even .plist files going from pc to mac, so when I attempt to open a project on my mac, xcode will throw the above parse error.
I had to zip the xcode project folder on the pc side, then on the mac side pull it out of the dropbox folder and unzip it. Then move it back to its original location. It's a pain but it worked.