I've searched and read through answers related to conditional formatting, but I can't seem to get mine to work, so maybe I'm doing something wrong.
I have a worksheet for work. It contains a list of animals in our shelter. What I'm attempting to do is color the entire row green if they've been adopted (noted by an "X" in column "G"). I've had =$G$2="X" and =$G2="X", but neither work. It'll only color the one row that was active when I set the rule, and when I enter "X" in another row, it does nothing. What am I missing?
Use the "indirect" function on conditional formatting.
Select Conditional Formatting
Select New Rule
Select "Use a Formula to determine which cells to format"
Enter the Formula, =INDIRECT("g"&ROW())="X"
Enter the Format you want (text color, fill color, etc).
Select OK to save the new format
Open "Manage Rules" in Conditional Formatting
Select "This Worksheet" if you can't see your new rule.
In the "Applies to" box of your new rule, enter =$A$1:$Z$1500 (or however wide/long you want the conditional formatting to extend depending on your worksheet)
For every row in the G column that has an X, it will now turn to the format you specified. If there isn't an X in the column, the row won't be formatted.
You can repeat this to do multiple row formatting depending on a column value. Just change either the g column or x specific text in the formula and set different formats.
For example, if you add a new rule with the formula, =INDIRECT("h"&ROW())="CAR", then it will format every row that has CAR in the H Column as the format you specified.
=$G1="X"
would be the correct (and easiest) method. Just select the entire sheet first, as conditional formatting only works on selected cells. I just tried it and it works perfectly. You must start at G1 rather than G2 otherwise it will offset the conditional formatting by a row.
To set Conditional Formatting for an ENTIRE ROW based on a single cell you must ANCHOR that single cell's column address with a "$", otherwise Excel will only get the first column correct. Why?
Because Excel is setting your Conditional Format for the SECOND column of your row based on an OFFSET of columns. For the SECOND column, Excel has now moved one column to the RIGHT of your intended rule cell, examined THAT cell, and has correctly formatted column two based on a cell you never intended.
Simply anchor the COLUMN portion of your rule cell's address with "$", and you will be happy
For example:
You want any row of your table to highlight red if the last cell of that row does not equal 1.
Select the entire table (but not the headings)
"Home" > "Conditional Formatting" > "Manage Rules..." > "New Rule" >
"Use a formula to determine which cells to format"
Enter: "=$T3<>1" (no quotes... "T" is the rule cell's column, "3" is its row)
Set your formatting
Click Apply.
Make sure Excel has not inserted quotes into any part of your formula... if it did, Backspace/Delete them out (no arrow keys please).
Conditional Formatting should be set for the entire table.
You want to apply a custom formatting rule. The "Applies to" field should be your entire row (If you want to format row 5, put in =$5:$5. The custom formula should be =IF($B$5="X", TRUE, FALSE), shown in the example below.
Use RC addressing. So, if I want the background color of Col B to depend upon the value in Col C and apply that from Rows 2 though 20:
Steps:
Select R2C2 to R20C2
Click on Conditional Formatting
Select "Use a formula to determine what cells to format"
Type in the formula: =RC[1] > 25
Create the formatting you want (i.e. background color "yellow")
Applies to: Make sure it says: =R2C2:R20C2
** Note that the "magic" takes place in step 4 ... using RC addressing to look at the value one column to the right of the cell being formatted.
In this example, I am checking to see if the value of the cell one column to the right of the cell being formatting contains a value greater than 25 (note that you can put pretty much any formula here that returns a T/F value)
In my case I wanted to compare values in cells of column E with Cells in Column G
Highlight the selection of cells to be checked in column E.
Select Conditional Format: Highlight cell rules
Select one of the choices in my case it was greater than.
In the left hand field of pop up use =indirect("g"&row())
where g was the row I was comparing against.
Now the row you are formatting will highlight based on if it is greater than the selection in row G
This works for every cell in Column E compared to cell in Column G of the selection you made for column E.
If
G2 is greater than E2 it formats
G3 is greater than E3 it formats etc
Related
[inventory sheet] (https://docs.google.com/spreadsheets/d/1kLDo8Up_RJa2rXsEZ9ElKBEhGUTsMw61-fQspOPuBz4/edit#gid=0)
I'm trying to conditionally format column E based on column D. For example, if the value in column D is <8, highlight the adjacent cell in column E green. If value is >7 and <15, highlight yellow. If value is >14, highlight red.
The formula I have now works, but I can't figure how to apply the formatting to the entire column without manually inputting 3+ conditional format rules on each individual cell.
The existing conditional format from your sheet is partially correct, it just needs some tweaking on the Apply to range value. You can create 3 conditional formats on E3 and it will apply to the whole column of E if you put the E3:E on range.
Please see the 3 conditional formats I have created based from your given sheet.
Conditional format 1:
Conditional format 2:
Conditional format 3:
Output:
Reference:
AND function
Just select the whole range and create one single rule per condition. Use the formula as it is created for the first cell and it will "drag" automatically.
For example with =D2>15
Please refer the image
I want the cell to be highlighted based on the value is less than or greater than the value in the benchmark column. I am not able to do that using conditional formatting custom formula. I have manually applied formatting for 02/01/2023 . I want the formatting to apply to the column with date = today() only.
Thanks :)
I can write a custom formula for each row of each date column. But is there any way a single custom formula that could format across rows and columns?
I'm guessing your fist value of 02/01/2023 and Activity1 is C2. Then for the whole range C2:Z (or whichever you have):
=C2>=$B2
Do this for one color for the whole range and it will drag automatically, you don't need to write it as an arrayformula. The "$" will always refer to the value in column B from the row it's positioned
if you are selecting whole range (C2:Z), try this for green and red respectively:
=(C2>=$B2)*(C2<>"")
=(C2<$B2)*(C2<>"")
I want the right column to get a bold font whenever the left column is bigger.
For example: 0 should be bold and 59 should be bold in the right column.
Whenever I try it I add a range and then choose 'smaller than' and I choose the range of the left column it adds the complete column and compares it to the complete other column. I want them to be compared individually.
Go to
Format.
Conditional Formatting.
In the field "Apply to range" fill in the range that you want to apply these formatting rules on. For example column B:B.
select "Greater than" in the "Format cells if..." drop-down box. Fill in the "value or formula box" the 1st cell that you want to check. For example =A1.
Change the Formatting style to Bold
And you're done.
Go here for a live example, copy it to your own drive and have fun!
You need to add a custom formula. In the example below I limited the range to D13:D22 and added the green color for clarity.
Even though the formula says "apply the format if D13<C13" it works like an arrayformula and applies it to the whole range cell by cell as you need.
Select the 'right' column and apply a CF Custom formula rule to the effect:
=right column top cell < left column top cell
I want to set conditional format rules in my Google spreadsheet. For the format cell, I select "Text contains", then I type values "PA, MA, CT, NY", formatting style I choose red. When I click DONE, the columns containing these words didn't show the color. I don't want to create rules "PA', "MA", "CT"and "NY" one by one. How can I fix them? Thanks for helping.
Select the relevant range (I am assuming starts at A1) and clear any existing CF rules from it. Format, Conditional formatting..., Format cells if... Custom formula is and:
=regexmatch(A1,"PA|MA|CT|NY")
with red fill and Done.
This should format any cells that contain any of the four state abbreviations (that is, both as part of the content of a cell and as all the content of the cell). It should format PACT but being case sensitive not many.
Try using OR with custom formula like this:
=or($A2="PA",$A2="MA",$A2="CT",$A2="NY")
As Ed said, but to clarify,
Go to conditional format and select 'Custom formula'
Assuming that your values are in column A, set the range to A1:A and enter the formula =OR($A:A="PA",$A:A="MA",$A:A="CT",$A:A="NY") in the custom formula field.
If the values are not in column A then change the formula as necessary.
On my google sheet for its form, I have the answers in Row 2.
There are 109 columns in which I need to check if the descending rows of each column match the contents of Row 2 of that column. On top of that, I have to have conditional formatting for the cells that DO NOT match the contents of Row 2 in their respective column.
Is there a way that I don't have to add a formula to each any every column?
You can do this with conditional formatting - for the "apply to range" section (pretending your data starts in column A and ends in D, although in reality you will put whatever the last column is) enter in
A2:D
then for the rule, choose custom formula and enter in this exact formula:
=if(eq(indirect(address(row(),COLUMN(),4)),indirect(ADDRESS(2,column(),2)))=TRUE,FALSE,TRUE)
This will dynamically highlight all of the answers that do not match the value in row 2