I have 3 different instances of tableview in Nib, where I am displaying all these tableview in a page control. And delegate and data source for all the 3 tableview is same.
Problem here is, Header view is appearing in one tableview and disappearing in others when I change the Page of the UIPageControl ?
Any idea how can I resolve this issue ?
Since it's not possible for a view to be a subview of more than one view at a time, using the same view as a header for multiple table views will result in odd visual artifacts (views disappearing one place and showing up somewhere else). You can add one header view per table view to your nib, or generate a header view for each programmatically, and assign them at run-time.
Related
I have a UIScrollView with lots of sub views on the scrollview. I have a picture, buttons, textfields and the like that all work fine.
Now I want to add a comment section below all this that "acts" like a UITableView.
What is the best way to accomplish this? I want the comment section to load 10 comments when that part of the view appears, and continually add 10 more comments when the 6th comment appears. There should also be an activity indicator too.
I know you can't put a collection view or tableview with a scrollview (according to Apple) as their are inherited from UIScrollView. And making the whole view controller a table view or collection view is tough since I have so many subviews and actions all linked up already.
What's the best approach?
Thanks.
You can create a new table view controller and load (add subview on cell content view) your current controller as first cell of table view controller.
Generally:
Is it OK to add a UITableView as a subview of another UITableView? Or, should I create a UIView and add each UITableView to it?
Specifically:
For a ComposeTableViewController with a typeahead, like in the iPhone's native Mail app, which approach would you recommend and why?
Note: I prefer to construct things 100% programmatically (no Interface Builder).
Subclass UITableViewController.
Then, to show the typeahead results, create and add a resultsTableView as a subview of self.tableView positioned directly underneath the the cell (of self.tableView) with the typeahead text field.
The nice thing about this approach is that resultsTableView scrolls with self.tableView automatically.
But, is it OK to add a UITableView as a subview of another UITableView?
Subclass UIViewController.
Create and add tableView (custom property) as a subview of self.view.
Create and add resultsTableView also as a subview of self.view.
The annoying thing about this approach is that I have to reposition resultsTableView manually anytime self.tableView scrolls.
I think I'd prefer approach 1, but adding a UITableView as a subview of another UITableView just seems smelly to me.
TableViews cannot have subviews. You can try adding a tableview as the view of a TableViewCell, but then you have to ask yourself how it would scroll, if you tried scrolling in the subtableview would it scroll the child tableview or the parent tableview? It is much easier to present multiple tableviews within a view. This can be done easily by setting your custom viewcontroller as the datasource of both tableviews contained within its view and then comparing the tableview pointer that is sent as a parameter of the datasource method to the two tableview pointers that are IVars of your custom view controller.
Hold stuff like this in a container. Create a container view controller which only does typeahead. This container view controller will hold your main table view controller (and its table view) and it will hold the typeahead view controller (and its view).
It will keep the logic needed for the typeahead out of your main table view and as a bonus you might end up with a reusable typeahead container which could be applied to other views.
Yes it is good to go for adding UITableView in as a cell of another UITableView.
I had one issue and posted a question
Multiple Views as subviews
And requirement was like a group of controls with list of other controls. I thought that time that it will be messy if i'm going to add UITableView as a cell of UITableView.
What i found that... Boy !! it's how iOS meant to be. There is no any lag while doing this.
Tested for below functionalities:
Scrolls like a charm
Separate delegates called for each
Reordering of both UITableView cell
Swipe and remove cell
Runtime datasource update for both UITableView and reload both at the same time.
There is no any reason not to add subview UITableView.
You can do it but it is against the principle of MVC. You will be setting the delegate of a view to another view which is wrong.
I am new to objective C. I have a small app where I have used a UITableviewcontroller(TVC). I need to add four elements.,label and button above TVC and a label and button below TVC. But it is allowing only to add 2 elements., one above TVC and other below TVC. Also added element is occupying the entire width of screen. Can I overcome this restriction???
Customize the table view cell – instead of using the default style of table view cell.
this link is helpful you with sample project
http://www.appcoda.com/customize-table-view-cells-for-uitableview/
These two are tableview properties.
tableHeaderView
tableFooterView
By using the above properties you can show your own custom view on top / bottom of table view.
sample code
[self.tableView setTableHeaderView:yourHeaderView];
[self.tableView setTableFooterView:yourFooterView];
Write this code in viewDidLoad.
UITableViewController is kind of a screwed up class, in my opinion. A UITableViewController can only manage a table view, and nothing else. If you want a more complex layout where you have a table view on part of the screen, and then other view objects elsewhere, you can't do that with a UITableViewController.
However, with iOS 6 and later, there is a pretty easy solution.
You can embed a UITableViewController as a child view controller of another view controller.
What you do is to create a parent view controller with everything you need. Then you create a container view on your parent view controller and size it to contain your table view. Then you create a separate scene in your storyboard that defines a table view controller. Finally, you control-drag from your container view to your UITableViewController, and create an embed segue.
I have a project on github that demonstrates this technique:
Demo project using UITableViewControllers as child view controllers
I have seen questions asked about mutliple UITableViews in one view but they all have only one table visible at a time. I am after something different please.
In my head I want four UITableViews visible in one UIScrollView inside one UIView. The four tables will be visible and populated at once. They will have a dynamic number of rows each so the scroll view will allow users to scroll off of the page to see rows that do not fit.
The tables would be two side by side and then below them the next two side by side so that you end up with a 2x2 square.
I can (sort of) wrap my head around how to code this in the controllers etc. but I cannot figure out how to organise the hierarchi. I have tried using the storeboard to layout the tables inside the view but 9 out of 10 attempts to drop controls in fail as I am obviously not fully understanding this.
Do I need to generate the UITableViews in the UIViews implementation file and add them as objects to the UIView? Or can I use the Storyboard?
Could someone please explain how the hierarchi of objects would be structured?
In my head it would be:
UIViewController
-> UiView
---> UIScrollView
------> UITableView
------> UITableView
------> UITableView
------> UITableView
But trying this in Storyboard doesn't work. I assume each UITableView will want its own UITableViewController and what I have read in other posts I would likey need to do this connecting in the UIViewController implementation file.
Any help is appreciated.
I think you might try to drag UITableViewController into your view Controller, at least I don't have that problem to add 4 table view into a scroll view.
here is how i added it
1.> Drag the scroll view control into view controller
Your view controller should look like this:
2.> Drag the table view control into the scroll view, and set the size and position of that table view
Your view controller should look like this:
3.> Then drag all the rest 3 table views onto Scroll view
But i would like to suggest a couple of things in your case
no using that much table view in the same view controller, it's a chaos in your codes to maintain all them. There are always better
options than 4 table view, maybe consider collection view. or even
separate the use flow.
If i were you, i won't use table view inside Scroll view, they are like scroll view inside scroll view, if you don't design the
interaction very very well, they become extremely hard to use.
If you still want to use four table view in the same view controller after all, you want to pay extra attentions on your table view datasource and delegate. very carefully handle all the cases.
Hope that helps you.
Tableviews are very customized scrollviews. I wouldn't put 4 of them on a scrollview, this wouldn't be very intuitive for the user as your finger would scroll the view in many ways depending on where exactly it touches the screen.
Instead, try having your 4 tableviews in a 2x2 pattern directly onto a simple UIView. This can be done inside the Storyboard.
As for filling up and using them, you have 2 ways :
A) Your UIViewController is the delegate and datasource of each of the 4 tableviews. When executing, you perform a switch on the first parameter (the tableview that called you) to determine the appropriate course of action.
B) You create 4 classes that each handle a single tableview, instanciate 4 objects inside your UIViewController and assign the UITableviews' delegate and datasource properties to these objects.
All technicality aside, 4 tableviews in a single screen is pretty crowded. Your design will definitely not fly on a iPhone, so I'm assuming iPad only. Even then, you should make sure that everything is visually appealing and the purpose of each control is clear. It's up to you, but I'd hate to see you work hard on an application only to see your efforts wasted because your visual design doesn't appeal to your users.
If the table views take up the entire region of the scroll view then they wont let any scroll events past to the scroll view that contains them, unless the scroll is horizontal.
For a simple one to one between a table view and a view controller, I would make each table view part of it's own UITableViewController (so you have four), and then make a UIViewController that adds each of the UITableViewControllers to it as a child.
This way you don't have to do any fancy logic around if statements on which tableview is asking for data, because the table view controllers only have one table view.
https://developer.apple.com/library/ios/featuredarticles/ViewControllerPGforiPhoneOS/CreatingCustomContainerViewControllers/CreatingCustomContainerViewControllers.html
I'm trying to make multiple UITableView inside a UIScollView, using Paging to navigate between TableViews.
I can Drag, let's say 10 UITableView to UIScollView using Storyboard. and it's working, but the those UITableView are nearly look the same, and I have to set each TableView with different info. It's kind of tedious and inefficient.
What if I create a generic UITableView and controller using storyboard. and programatically generate and add 10 copys of it (with different content) to the UIScollView (which also created using storyboard)
Can I do it using Storyboard, and How? or this can only be done using xib file?
Instead of that I would suggest you programatically add or remove the table view as a subview, by creating a new instance of the table view each time, scrollViewDidScroll is called, ..
Just do this make sure u have the array data for table view before hand and as soon as you add a tableview populate it with the respective data,….I had applied the same logic for a bunch of labels it worked for me.