I have the following relation in my model:
A user can have several consumers
According to that, I call several actions from different controllers that depend on that consumer_id in the URL. So, I do stuff like:
/:consumer_id/products/all
/:consumer_id/locals/all?params...
I want to be able to given that I am in a particular view, let's say /3/products/all, be able to refresh, redirect or whatever is the best to /4/products/all, with a form that shows the different consumers attached to that user.
I know how to display the form, but I fail to see which action should I put given that I want to load the current controller, current action and the current params, except that I want to change the params[:consumer_id] and the session[:consumer_id] to the one chosen by the user in the form of the view.
What's the best or appropriate way of doing so?
This is a link to the same page with the same parameters and one additional parameter:
<%= link_to "Show more results", url_for(params.merge(:per => 100)) %>
If you want to modify a parameter rather than add a new one, you can modify the params hash just as you would modify any hash, and use url_for again.
Inside the view you can access both the current controller using controller_name and the current action using action_name
Your question is not clear. You want to choose consumer_id from your form, then use that consumer id inside the same page or for links to other pages?
If you want to use the consumer id for the current page, you need to use javascript or JQuery to update all attributes of the current page.
If you want to use that consumer id for links,
you may also use JQuery to update all links on your page
Or, you can submit the form to the server with new consumer_id.
Related
I currently have a landing page /vouchers and then many pages linked to that for example /vouchers/1, /vouchers/2 etc.
I currently have the functionality that if this is entered /vouchers/1?offer=50 then the form on that page is sent with the offer included in the url.
Now I need to add the functionality so if /vouchers?offer=50 is entered, any page that is then navigated to, will keep these parameters. (for example /vouchers/1 should then include the offer from the url)
I see only one way.
store all "special" parameters in session
in any handler — if "special" parameters are in session — form new url with this parameters and redirect user there
Let me guess :
1. you have a model , named "Voucher"
2. In case you want to see the entry for , let's say , voucher#1 , you see URL voucher/1 (notice the singular form of the word 'voucher')
3. you assign the value of the offer by some interaction by user , for example - link or list . Let's say it's a link . Try this (HAML):
= link_to "Accept this offer and create a new voucher", new_voucher_path(:offer => #offer_value)
(in your case #offer_value = 50)
The following view (or partial ) will be able to read the value in :offer .
You can refer to this useful discusion .
I solved this, probably not in the best way. On the /voucher page, I added if statements to all the links, so if there's an offer in the url, the links are appended appropriately.
I want to display a list of stocks when the user logs in (default parameters). This smells like an index action. However, I will also make a form for the user to select the market capitalization of the stocks (that is to refine the universe). The submission of the form will send parameters to some action (I am not sure if I should use the same index action) and then do an ajax update of the list. This ajax doesn't do anything to the database, it just updates the parameters for the database query.
The first time the user visits the site, they will see the default parameters for the query, but I also want them to be able to change the parameters later and renew the list according to their parameter through ajax.
Yep, a list of stocks sure sounds like an index action. Do you mean that you want to filter the list depending on some form input?
You can make the form send to the index action with a get method, and in your controller, just read the params, and query your #stocks however you want your filter to work.
This is the non-Ajax solution, so users without Javascript will be happy. When you get this working, you can easily AJAXify it.
I want to pass the id from one action to the next action, but I do not want it seen in the URL. Is there a way to hide it?
Using Symfony, I have created a sign-up done page whose URL should be /signup/done
When the form is processed, I want to redirect to the signupSuccess action and pass the recently created ID for future use. So I use...
$this->redirect('#signup_done?id=' . $sign_up->getId());
The routing is as follows:
signup_done:
url: /signup/done
param: { module: SignUp, action: signupDone }
I have avoided the :id at the end because I don't want it in the URL.
But the resulting URL is /signup/done?id=1
Just as an experiment, I tried putting this on a template.
<?php echo link_to('Sign-up again', '#signup_done?id=1', 'post=true') ?>
Even when using post, the query parameter appears in the URL.
The need is: I want to pass the id from one action to the next action, but I do not want it seen in the URL. Is there a way to hide it?
I set the id as a parameter in the request using $request->setParameter('id', $id) and it was available in the next action.
This kept the URL clean.
If you want to post, you need a form. Back in symfony 1.2 there were helpers that you could call and made you just that - but they were removed for the promotion of promoting good code.
Depending on how you want the 'Sign up again' text to look, you can either create a simple form and a submit button, or create a link, attach a click listener, and create a form there via JS, finally post it.
Any parameter that you pass to the route in url_for, link_to and such end up in the get parameters.
Specifically, I have a number of pages in my Rails app that use the same partial. In the action handler for each page I create an array object (e.g. #list_elements) based on a database query. Each page uses a different query so that each page has different list elements in it. At the top of each page I have a form_remote_tag containing an edit field, allowing the user to add a new element in a dynamic, AJAXy fashion (think something like Twitter 'What's happening' box).
My problem is that when the AJAX command fires I need to reload the list to include the newly added item, but the contents of the list were determined by a database query. I need to remember which query applies to the current page (i.e. controller action) so that I can run it again. I thought about storing something in the rails session structure but it seems like overkill - it's like storing the current page all the time.
Anybody done anything like this and have a nice Railsy way to achieve it?
Ben
Couldn't you just re-render the partial in your rjs template?
page[:div_element].replace_html :partial => 'partial'
If you perform the query and define the array in the controller action, then an ajax call will refresh that array.
I want to create one form with 2 buttons in rails. Both forms operate on the same data in different ways, and I would prefer to keep the associated functionality in two different methods. Previously I've redirected to the appropriate method after doing a string comparision on params[:commit], but my gut says there's a better approach. Suggestions?
Two different submit buttons that send the form to two different actions:
<%= submit_tag('Insert', :onclick=>"document.myForm.action = 'insert';") %>
<%= submit_tag('Update', :onclick=>"document.myForm.action = 'update';") %>
Instead of "myForm" you need to put whatever is in the "name" property of your tag.
You can set that property in your default form:for tag like this:
<%= form_for(#something, :html => {:name => "myForm"}) do |f| %>
Without using JavaScript, your only solution is what you mention: checking which button was clicked by looking at the POST data in the controller. This is simply due to the nature of the HTML form element. It cannot have more than one value for its action attribute.
If you're not worried about what will happen when JavaScript isn't available, then you can write some script to change the action attribute when one of the submit buttons is clicked, prior to actually submitting the form. In the case of an ajax request, it could simply submit to the correct URL directly without altering attributes on the form.
I also used the params[:commit] method on a form already. Using the I18n helpers makes this a bit less fragile as you can use the same lookup in the view and controller, so you don't encounter the problem that the string changes a bit.
Besides that I can only think of using JavaScript to handle the clicks on the buttons and then send the form data to different Rails actions (Maybe you can change the HTML action attribute of the form with JavaScript before you submit the form).
If you're using prototype.js, you can use Form.serialize() to grab your data from your form and from there use the different buttons to post to different actions.