I'm using TFileStream.Read in a loop to read a text file, but I find that the last part is not being read into the buffer - although the total number of bytes being read is equal to the filesize.
This is my code:
procedure TForm1.DoImport;
var
f: String;
fs: TFileStream;
r, c: Integer;
buf: TBytes;
const
bufsiz = 16384;
begin
SetLength(buf, bufsiz);
f := 'C:\Report\Claims\Claims.csv';
fs := TFileStream.Create(f, fmOpenRead);
try
c := 0;
repeat
r := fs.Read(buf, bufsiz);
Inc(c, r);
until (r <> bufsiz);
showmessage('Done. ' + IntToStr(c)); // <-- c equals to filesize !!
Memo1.Text := StringOf(buf); // <-- but the memo does not show the last chunk of the file
finally
fs.Free;
end;
end;
At the end, the TMemo does not contain the last chunk of the file, but the 2nd to last chunk. Is there something wrong with my code?
Thanks in advance!
The beginning of that buffer contains the last chunk of your file. But after that comes the content of the previous chunk, because you never cleared the buffer. So you think that your memo contains the previous chunk, but it is a mix of both.
You could use the copy function in order to just add a part of the buffer.
Memo1.Text := StringOf(Copy(buf, 0, r)); // r is the number of bytes to copy
A better way for reading a text file is using TStringList or TStringReader. These will take care of the file encoding (Ansi, UTF8, ...) I usually prefer the TStringList because I had too much trouble with some of the bugs in TStringReader.
I am trying to get this code to work. It's a standard search and replace function.
I get no errors at all but nothing changes in the text file for some reason.
Here is the full code:
procedure FileReplaceString(const FileName, searchstring, replacestring: string);
var
fs: TFileStream;
S: string;
begin
fs := TFileStream.Create(FileName, fmOpenread or fmShareDenyNone);
try
SetLength(S, fs.Size);
fs.ReadBuffer(S[1], fs.Size);
finally
fs.Free;
end;
S := StringReplace(S, SearchString, replaceString, [rfReplaceAll, rfIgnoreCase]);
fs := TFileStream.Create(FileName, fmCreate);
try
fs.WriteBuffer(S[1], Length(S));
finally
fs.Free;
end;
end;
procedure TForm1.Button1Click(Sender: TObject);
var Path, FullPath:string;
begin
Path:= ExtractFilePath(Application.ExeName);
FullPath:= Path + 'test.txt';
FileReplaceString(FullPath,'changethis','withthis');
end;
The reason is that S, searchstring, and replacestring are Unicode strings (so, e.g., "Test" is 54 00 65 00 73 00 74 00) while the text file probably is a UTF-8 or ANSI file (so, e.g., "Test" is 54 65 73 74).
This means that the value stored in S will be highly corrupt (you take the bytes of a UTF-8 text and interpret them as the bytes of a Unicode text)! In the Test example, you will get 敔瑳?? where the two last characters are random (why?).
To test this hypothesis, simply declare S as AnsiString instead, then it should work.
Of course, if you need Unicode support, you need to do some UTF-8 encoding/decoding. The simplest solution to your problem would be to use the TStringList; then you get everything you need for free.
var
tm : string;
dt : tdatetime;
tm := '2009-08-21T09:11:21Z';
dt := ?
I know I can parse it manually but I wonder if there is any built-in function or Win32 API function to do this ?
I don't know why there are so many people shooting their mouth off when they don't know what they are talking about? I have to do this menial work; Is it a RAD tool? I sometimes find Delphi has a real superb architecture, though.
procedure setISOtoDateTime(strDT: string);
var
// Delphi settings save vars
ShortDF, ShortTF : string;
TS, DS : char;
// conversion vars
dd, tt, ddtt: TDateTime;
begin
// example datetime test string in ISO format
strDT := '2009-07-06T01:53:23Z';
// save Delphi settings
DS := DateSeparator;
TS := TimeSeparator;
ShortDF := ShortDateFormat;
ShortTF := ShortTimeFormat;
// set Delphi settings for string to date/time
DateSeparator := '-';
ShortDateFormat := 'yyyy-mm-dd';
TimeSeparator := ':';
ShortTimeFormat := 'hh:mm:ss';
// convert test string to datetime
try
dd := StrToDate( Copy(strDT, 1, Pos('T',strDT)-1) );
tt := StrToTime( Copy(strDT, Pos('T',strDT)+1, 8) );
ddtt := trunc(dd) + frac(tt);
except
on EConvertError do
ShowMessage('Error in converting : ' + strDT);
end;
// restore Delphi settings
DateSeparator := DS;
ShortDateFormat := ShortDF;
TimeSeparator := TS;
ShortTimeFormat := ShortTF;
// display test string
ShowMessage ( FormatDateTime('mm/dd/yyyy hh:mm:ss', ddtt) );
end;
http://coding.derkeiler.com/Archive/Delphi/comp.lang.pascal.delphi.misc/2006-08/msg00190.html
If you are using Indy 10, its StrInternetToDateTime() and GMTToLocalDateTime() functions (in the IdGlobalProtocols unit) can parse ISO-8601 formatted strings.
This looks like an internet protocol related activity, so you should have no problems in using the Win32 API for this. However note, that Windows does not correctly support conversion to/from UTC for historical dates that are more than approximately 20 years old - Windows simply doesn't have enough details in its time zone settings for that.
In my program, I process millions of strings that have a special character, e.g. "|" to separate tokens within each string. I have a function to return the n'th token, and this is it:
function GetTok(const Line: string; const Delim: string; const TokenNum: Byte): string;
{ LK Feb 12, 2007 - This function has been optimized as best as possible }
var
I, P, P2: integer;
begin
P2 := Pos(Delim, Line);
if TokenNum = 1 then begin
if P2 = 0 then
Result := Line
else
Result := copy(Line, 1, P2-1);
end
else begin
P := 0; { To prevent warnings }
for I := 2 to TokenNum do begin
P := P2;
if P = 0 then break;
P2 := PosEx(Delim, Line, P+1);
end;
if P = 0 then
Result := ''
else if P2 = 0 then
Result := copy(Line, P+1, MaxInt)
else
Result := copy(Line, P+1, P2-P-1);
end;
end; { GetTok }
I developed this function back when I was using Delphi 4. It calls the very efficient PosEx routine that was originally developed by Fastcode and is now included in the StrUtils library of Delphi.
I recently upgraded to Delphi 2009 and my strings are all Unicode. This GetTok function still works and still works well.
I have gone through the new libraries in Delphi 2009 and there are many new functions and additions to it.
But I have not seen a GetToken function like I need in any of the new Delphi libraries, in the various fastcode projects, and I can't find anything with a Google search other than Zarko Gajic's: Delphi Split / Tokenizer Functions, which is not as optimized as what I already have.
Any improvement, even 10% would be noticeable in my program. I know an alternative is StringLists and to always keep the tokens separate, but this has a big overhead memory-wise and I'm not sure if I did all that work to convert whether it would be any faster.
Whew. So after all this long winded talk, my question really is:
Do you know of any very fast implementations of a GetToken routine? An assembler optimized version would be ideal?
If not, are there any optimizations that you can see to my code above that might make an improvement?
Followup: Barry Kelly mentioned a question I asked a year ago about optimizing the parsing of the lines in a file. At that time I hadn't even thought of my GetTok routine which was not used for the that read or parsing. It is only now that I saw the overhead of my GetTok routine which led me to ask this question. Until Carl Smotricz and Barry's answers, I had never thought of connecting the two. So obvious, but it just didn't register. Thanks for pointing that out.
Yes, my Delim is a single character, so obviously I have some major optimization I can do. My use of Pos and PosEx in the GetTok routine (above) blinded me to the idea that I can do it faster with a character by character search instead, with bits of code like:
while (cp^ > #0) and (cp^ <= Delim) do
Inc(cp);
I'm going to go through everyone's answers and try the various suggestions and compare them. Then I'll post the results.
Confusion: Okay, now I'm really perplexed.
I took Carl and Barry's recommendation to go with PChars, and here is my implementation:
function GetTok(const Line: string; const Delim: string; const TokenNum: Byte): string;
{ LK Feb 12, 2007 - This function has been optimized as best as possible }
{ LK Nov 7, 2009 - Reoptimized using PChars instead of calls to Pos and PosEx }
{ See; https://stackoverflow.com/questions/1694001/is-there-a-fast-gettoken-routine-for-delphi }
var
I: integer;
PLine, PStart: PChar;
begin
PLine := PChar(Line);
PStart := PLine;
inc(PLine);
for I := 1 to TokenNum do begin
while (PLine^ <> #0) and (PLine^ <> Delim) do
inc(PLine);
if I = TokenNum then begin
SetString(Result, PStart, PLine - PStart);
break;
end;
if PLine^ = #0 then begin
Result := '';
break;
end;
inc(PLine);
PStart := PLine;
end;
end; { GetTok }
On paper, I don't think you can do much better than this.
So I put both routines to the task and used AQTime to see what's happening. The run I had included 1,108,514 calls to GetTok.
AQTime timed the original routine at 0.40 seconds. The million calls to Pos took 0.10 seconds. A half a million of the TokenNum = 1 copies took 0.10 seconds. The 600,000 PosEx calls only took 0.03 seconds.
Then I timed my new routine with AQTime for the same run and exactly the same calls. AQTime reports that my new "fast" routine took 3.65 seconds, which is 9 times as long. The culprit according to AQTime was the first loop:
while (PLine^ <> #0) and (PLine^ <> Delim) do
inc(PLine);
The while line, which was executed 18 million times, was reported at 2.66 seconds. The inc line, executed 16 million times, was said to take 0.47 seconds.
Now I thought I knew what was happening here. I had a similar problem with AQTime in a question I posed last year: Why is CharInSet faster than Case statement?
Again it was Barry Kelly who clued me in. Basically, an instrumenting profiler like AQTime does not necessarily do the job for microoptimization. It adds an overhead to each line which may swamp the results which is shown clearly in these numbers. The 34 million lines executed in my new "optimized code" overwhelm the several million lines of my original code, with apparently little or no overhead from the Pos and PosEx routines.
Barry gave me a sample of code using QueryPerformanceCounter to check that he was correct, and in that case he was.
Okay, so let's do the same now with QueryPerformanceCounter to prove that my new routine is faster and not 9 times slower as AQTime says it is. So here I go:
function TimeIt(const Title: string): double;
var i: Integer;
start, finish, freq: Int64;
Seconds: double;
begin
QueryPerformanceCounter(start);
for i := 1 to 250000 do
GetTokOld('This is a string|that needs|parsing', '|', 1);
for i := 1 to 250000 do
GetTokOld('This is a string|that needs|parsing', '|', 2);
for i := 1 to 250000 do
GetTokOld('This is a string|that needs|parsing', '|', 3);
for i := 1 to 250000 do
GetTokOld('This is a string|that needs|parsing', '|', 4);
QueryPerformanceCounter(finish);
QueryPerformanceFrequency(freq);
Seconds := (finish - start) / freq;
Result := Seconds;
end;
So this will test 1,000,000 calls to GetTok.
My old procedure with the Pos and PosEx calls took 0.29 seconds.
The new one with PChars took 2.07 seconds.
Now I am completely befuddled! Can anyone tell me why the PChar procedure is not only slower, but is 8 to 9 times slower!?
Mystery solved! Andreas said in his answer to change the Delim parameter from a string to a Char. I'll always be using just a Char, so at least for my implementation this is very possible. I was amazed at what happened.
The time for the 1 million calls went down from 1.88 seconds to .22 seconds.
And surprisingly, the time for my original Pos/PosEx routine went UP from .29 to .44 seconds when I changed it's Delim parameter to a Char.
Frankly, I'm disappointed by Delphi's optimizer. That Delim is a constant parameter. The optimizer should have noticed that the same conversion is happening within the loop and should have moved it out so that it would only be done once.
Double checking my Code generation parameters, yes I do have Optimization True and String format checking Off.
Bottom line is that the new PChar routine with Andrea's fix is about 25% faster than my original (.22 versus .29).
I still want to follow up on the other comments here and test them out.
Turning off optimization and turning on String format checking only increases the time from .22 to .30. It adds about the same to the original.
The advantage to using assembler code, or calling routines written in assembler like Pos or PosEx is that they are NOT subject to what code generation options you have set. They will always run the same way, a pre-optimized and non-bloated way.
I have reaffirmed in the last couple of days, that the best way to compare code for microoptimization is to look at and compare the Assembler code in the CPU window. It would be nice if Embarcadero could make that window a bit more convenient, and allow us to copy portions to the clipboard or to print sections of it.
Also, I unfairly slammed AQTime earlier in this post, thinking that the extra time added for my new routine was solely because of the instrumentation it added. Now that I go back and check with the Char parameter instead of String, the while loop is down to .30 seconds (from 2.66) and the inc line is down to .14 seconds (from .47). Strange that the inc line would go down as well. But I'm getting worn out from all this testing already.
I took Carl's idea of looping by characters, and rewrote that code with that idea. It makes another improvement, down to .19 seconds from .22. So here is now the best so far:
function GetTok(const Line: string; const Delim: Char; const TokenNum: Byte): string;
{ LK Nov 8, 2009 - Reoptimized using PChars instead of calls to Pos and PosEx }
{ See; https://stackoverflow.com/questions/1694001/is-there-a-fast-gettoken-routine-for-delphi }
var
I, CurToken: Integer;
PLine, PStart: PChar;
begin
CurToken := 1;
PLine := PChar(Line);
PStart := PLine;
for I := 1 to length(Line) do begin
if PLine^ = Delim then begin
if CurToken = TokenNum then
break
else begin
CurToken := CurToken + 1;
inc(PLine);
PStart := PLine;
end;
end
else
inc(PLine);
end;
if CurToken = TokenNum then
SetString(Result, PStart, PLine - PStart)
else
Result := '';
end;
There still may be some minor optimizations to this, such as the CurToken = Tokennum comparison, which should be the same type, Integer or Byte, whichever is faster.
But let's say, I'm happy now.
Thanks again to the StackOverflow Delphi community.
It makes a big difference what "Delim" is expected to be. If it's expected to be a single character, you're far better off stepping through the string character by character, ideally through a PChar, and testing specifically.
If it's a long string, Boyer-Moore and similar searches have a set-up phase for skip tables, and the best way would be to build the tables once, and reuse them for each subsequent find. That means you need state between calls, and this function would be better off as a method on an object instead.
You might be interested in this answer I gave to a question some time before, about the fastest way to parse a line in Delphi. (But I see that it is you that asked the question! Nevertheless, in solving your problem, I would hew to how I described parsing, not using PosEx like you are using, depending on what Delim normally looks like.)
UPDATE: OK, I spent about 40 minutes looking at this. If you know the delimiter is going to be a character, you're pretty much always better off with the second version (i.e. PChar scanning), but you have to pass Delim as a character. At the time of writing, you're converting the PLine^ expression - of type Char - to a string for comparison with Delim. That will be very slow; even indexing into the string, with Delim[1] will also be somewhat slow.
However, depending on how large your lines are, and how many delimited pieces you want to pull out, you may be better off with a resumable approach, rather than skipping unwanted delimited pieces inside the tokenizing routine. If you call GetTok with successively increasing indexes, like you are currently doing in your mini benchmark, you'll end up with O(n*n) performance, where n is the number of delimited sections. That can be turned into O(n) if you save the state of the scan and restore it for the next iteration, or pack all extracted items into an array.
Here's a version that does all tokenization once, and returns an array. It needs to tokenize twice though, in order to know how large to make the array. On the other hand, only the second tokenization needs to extract the strings:
// Do all tokenization up front.
function GetTok4(const Line: string; const Delim: Char): TArray<string>;
var
cp, start: PChar;
count: Integer;
begin
// Count sections
count := 1;
cp := PChar(Line);
start := cp;
while True do
begin
if cp^ <> #0 then
begin
if cp^ <> Delim then
Inc(cp)
else
begin
Inc(cp);
Inc(count);
end;
end
else
begin
Inc(count);
Break;
end;
end;
SetLength(Result, count);
cp := start;
count := 0;
while True do
begin
if cp^ <> #0 then
begin
if cp^ <> Delim then
Inc(cp)
else
begin
SetString(Result[count], start, cp - start);
Inc(cp);
Inc(count);
end;
end
else
begin
SetString(Result[count], start, cp - start);
Break;
end;
end;
end;
Here's the resumable approach. The loads and stores of the current position and delimiter character do have a cost, though:
type
TTokenizer = record
private
FSource: string;
FCurrPos: PChar;
FDelim: Char;
public
procedure Reset(const ASource: string; ADelim: Char); inline;
function GetToken(out AResult: string): Boolean; inline;
end;
procedure TTokenizer.Reset(const ASource: string; ADelim: Char);
begin
FSource := ASource; // keep reference alive
FCurrPos := PChar(FSource);
FDelim := ADelim;
end;
function TTokenizer.GetToken(out AResult: string): Boolean;
var
cp, start: PChar;
delim: Char;
begin
// copy members to locals for better optimization
cp := FCurrPos;
delim := FDelim;
if cp^ = #0 then
begin
AResult := '';
Exit(False);
end;
start := cp;
while (cp^ <> #0) and (cp^ <> Delim) do
Inc(cp);
SetString(AResult, start, cp - start);
if cp^ = Delim then
Inc(cp);
FCurrPos := cp;
Result := True;
end;
Here's the full program I used for benchmarking.
Here are the results:
*** count=3, Length(src)=200
GetTok1: 595 ms
GetTok2: 547 ms
GetTok3: 2366 ms
GetTok4: 407 ms
GetTokBK: 226 ms
*** count=6, Length(src)=350
GetTok1: 1587 ms
GetTok2: 1502 ms
GetTok3: 6890 ms
GetTok4: 679 ms
GetTokBK: 334 ms
*** count=9, Length(src)=500
GetTok1: 3055 ms
GetTok2: 2912 ms
GetTok3: 13766 ms
GetTok4: 947 ms
GetTokBK: 446 ms
*** count=12, Length(src)=650
GetTok1: 4997 ms
GetTok2: 4803 ms
GetTok3: 23021 ms
GetTok4: 1213 ms
GetTokBK: 543 ms
*** count=15, Length(src)=800
GetTok1: 7417 ms
GetTok2: 7173 ms
GetTok3: 34644 ms
GetTok4: 1480 ms
GetTokBK: 653 ms
Depending on the characteristics of your data, whether the delimiter is likely to be a character or not, and how you work with it, different approaches may be faster.
(I made a mistake in my earlier program, I wasn't measuring the same operations for each style of routine. I updated the pastebin link and benchmark results.)
Your new function (the one with PChar) should declare "Delim" as Char and not as String. In your current implementation the compiler has to convert the PLine^ char into a string to compare it with "Delim". And that happens in a tight loop resulting is an enormous performance hit.
function GetTok(const Line: string; const Delim: Char{<<==}; const TokenNum: Byte): string;
{ LK Feb 12, 2007 - This function has been optimized as best as possible }
{ LK Nov 7, 2009 - Reoptimized using PChars instead of calls to Pos and PosEx }
{ See; http://stackoverflow.com/questions/1694001/is-there-a-fast-gettoken-routine-for-delphi }
var
I: integer;
PLine, PStart: PChar;
begin
PLine := PChar(Line);
PStart := PLine;
inc(PLine);
for I := 1 to TokenNum do begin
while (PLine^ <> #0) and (PLine^ <> Delim) do
inc(PLine);
if I = TokenNum then begin
SetString(Result, PStart, PLine - PStart);
break;
end;
if PLine^ = #0 then begin
Result := '';
break;
end;
inc(PLine);
PStart := PLine;
end;
end; { GetTok }
Delphi compiles to VERY efficient code; in my experience, it was very difficult to do better in assembler.
I think you should just point a PChar (they still exist, don't they? I parted ways with Delphi around 4.0) at the beginning of the string and increment it while counting "|"s, until you've found n-1 of them. I suspect that will be faster than calling PosEx repeatedly.
Take note of that position, then increment the pointer some more until you hit the next pipe. Pull out your substring. Done.
I'm only guessing, but I wouldn't be surprised if this was close to the quickest this problem can be solved.
EDIT: Here's what I had in mind. This code is, alas, uncompiled and untested, but it should demonstrate what I meant.
In particular, Delim is treated as a single char, which I believe makes a world of difference if that will fulfill the requirements, and the character at PLine is tested only once. Finally, there's no more comparison against TokenNum; I believe it's faster to decrement a counter to 0 for counting delimiters.
function GetTok(const Line: string; const Delim: string; const TokenNum: Byte): string;
var
Del: Char;
PLine, PStart: PChar;
Nth, I, P0, P9: Integer;
begin
Del := Delim[1];
Nth := TokenNum + 1;
P0 := 1;
P9 := Line.length + 1;
PLine := PChar(line);
for I := 1 to P9 do begin
if PLine^ = Del then begin
if Nth = 0 then begin
P9 := I;
break;
end;
Dec(Nth);
if Nth = 0 then P0 := I + 1
end;
Inc(PLine);
end;
if (Nth <= 1) or (TokenNum = 1) then
Result := Copy(Line, P0, P9 - P0);
else
Result := ''
end;
Using assembler would be a micro-optimization. There are much greater gains to be had by optimizing the algorithm. Not doing work beats doing work in the fastest possible way, every time.
One example would be if you have places in your program where you need several tokens of the same line. Another procedure that returns an array of tokens which you can then index into should be faster than calling your function more than once, especially if you let the procedure not return all tokens, but only as many as you need.
But in general I agree with Carl's answer (+1), using a PChar for scanning would probably be faster than your current code.
This is a function that I've had in my personal library for quite some time that I use extensively. I believe this is the most current version of it. I've had multiple versions in the past being optimized for a variety of different reasons. This one tries to take into account Quoted strings, but if that code is removed it makes the function a slight bit faster.
I actually have a number of other routines, CountSections and ParseSectionPOS being a couple of examples.
Unfortuately this routine is ansi/pchar based only. Although I don't think it would be difficult to move it to unicode. Maybe I've already done that...I'll have to check on that.
Note: This routine is 1 based in the ParseNum indexing.
function ParseSection(ParseLine: string; ParseNum: Integer; ParseSep: Char; QuotedStrChar:char = #0) : string;
var
wStart, wEnd : integer;
wIndex : integer;
wLen : integer;
wQuotedString : boolean;
begin
result := '';
wQuotedString := false;
if not (ParseLine = '') then
begin
wIndex := 1;
wStart := 1;
wEnd := 1;
wLen := Length(ParseLine);
while wEnd <= wLen do
begin
if (QuotedStrChar <> #0) and (ParseLine[wEnd] = QuotedStrChar) then
wQuotedString := not wQuotedString;
if not wQuotedString and (ParseLine[wEnd] = ParseSep) then
begin
if wIndex=ParseNum then
break
else
begin
inc(wIndex);
wStart := wEnd+1;
end;
end;
inc(wEnd);
end;
result := copy(ParseLine, wStart, wEnd-wStart);
if (length(result) > 0) and (QuotedStrChar <> #0) and (result[1] = QuotedStrChar) then
result := AnsiDequotedStr(result, QuotedStrChar);
end;
end; { ParseSection }
In your code, I think this is the only line that can be optimized:
Result := copy(Line, P+1, MaxInt)
If you calculate the new Length there, it might get a bit faster, but not the 10% you are looking for.
Your tokenizing algorithm seems pretty OK.
For optimizing it, I would run it through a profiler (like AQTime from AutomatedQA) with a representative subset of your production data. That will point you to the weakest spot.
The only RTL function that comes close is this one in the Classes unit:
procedure TStrings.SetDelimitedText(const Value: string);
It tokenizes, but uses both QuoteChar and Delimiter, but you only use a Delimiter.
It uses the SetString function in the System unit which is a pretty fast way to set the content of a string based on a PChar/PAnsiChar/PUnicodeChar and a length.
That might get you some improvement as well; on the other hand, Copy is really fast too.
I'm not the person always blaming the algorithm, but if I look at the first piece of source,
the problem is that for string N, you do the POS/posexes for string 1..n-1 again too.
This means for N items, you do sum (n, n-1,n-2...1) POSes (=+/- 0.5*N^2) , while only N are needed.
If you simply cache the position of the last found result, e.g. in a record that is passed by VAR parameter, you can gain a lot.
type
TLastPosition = record
elementnr : integer; // last tokennumber
elementpos: integer; // character index of last match
end;
and then something
if tokennum=(lastposition.elementnr+1) then
begin
newpos:=posex(delim,line,lastposition.elementpos);
end;
Unfortunately, I don't have the time now to write it out, but I hope you get the idea