I'm following the first Ruby on Rails 3 tutorial from PeepCode and at around 27-29 minutes in, they have us start the Rails server. To the best of my knowledge, I have Rails (and Ruby) successfully installed.
When I run the command rails server (from Windows 7 Command Prompt per the instructions of the video), I get the message:
=> Booting WEBrick
=> Rails 3.1.3 application starting in development on http://0.0.0.0:3000
=> Call with -d to detach
=> Ctrl-C to shutdown server
[2011-12-02 18:37:57] INFO WEBrick 1.3.1
[2011-12-02 18:37:57] INFO ruby 1.9.3 (2011-10-30) [i386-mingw32]
[2011-12-02 18:37:57] INFO WEBrick::HTTPServer#start: pid=5584 port=3000
And it doesn't return to the prompt, indicating that it is running. Also, to me (and compared to the video), this looks like a successful message.
However, when I browse to the URL, http://0.0.0.0:3000, as directed by the video, I get an error (while the video opens to the default index page for Ruby). The error I get is:
Error 108 (net::ERR_ADDRESS_INVALID): Unknown error.
Since I'm using Google Chrome, it also says:
The webpage at http://0.0.0.0:3000/ might be temporarily down or it may have moved permanently to a new web address.
So, I was wondering how to fix this?
0.0.0.0 is the ip address that Webrick is binding to. It means 'listen on all interfaces'. In other words, you can connect to this application from the internal address (localhost or 127.0.0.1) as well as the external address on the network (192.168.1.x or 10.0.10.x or a domain name that resolves to an address this machine has on the network). The server doesn't care where the request comes from.
If, however, you started rails server with the '-b' or '--binding' option and told the server to bind to 127.0.0.1, the server would not respond to requests to the external interface. You could still use 127.0.0.1 or localhost but you could not connect to this server using it's external ip address locally or from another machine.
Going to http:// 0.0.0.0:3000 works on my Linux system and most likely the screencast you were watching was using a mac which would also work. My guess is that 0.0.0.0 isn't supported on Windows.
Just use localhost if you are on the box or the ip address of the box if you are accessing it from another machine. That is what I do, even when I'm running a machine that understands 0.0.0.0.
You can start the server with this command:
rails server -b localhost
But as a lazy typist, in my .bash_aliases, I have this alias
alias rs='r s -b localhost'
With the alias, I can start the server with just:
rs
Related
I'm working at getting a very basic ruby/rails environment up and running, and I am presently unable to connect to it.
I'm working on a Macbook (updates current), and I've got an Ubuntu VM running that I'm using as my test server.
I have port-forwarding set up for connecting with the VM (hypervisor = VirtualBox)
8083 to 80 (http)
9307 to 3306 (mysql)
2223 to 22 (ssh)
3010 to 3000 (WEBrick)
VM Port-Forwarding Setup Screen
I have not setup a firewall on the server
Using this, I can ssh in, and I can hit "non-rails" sites just fine via Apache. What I can't do is get a basic "hello-world" screen up for the rails environment. I CAN get there if I cut out the VM and start WEBrick ("rails s") directly from the Mac environment and then go to localhost's port 3000, but when I attempt the same thing on the VM and then try to hit port 3010 the same way, I get back a "no data received" response.
WEBrick appears to be running just fine
myserver$ rails s
=> Booting WEBrick
=> Rails 4.2.5.1 application starting in development on http://localhost:3000
=> Run `rails server -h` for more startup options
=> Ctrl-C to shutdown server
[2016-02-08 09:01:30] INFO WEBrick 1.3.1
[2016-02-08 09:01:30] INFO ruby 2.1.5 (2014-11-13) [x86_64-linux-gnu]
[2016-02-08 09:01:30] INFO WEBrick::HTTPServer#start: pid=3756 port=3000
Turning Apache on/off does not change anything beyond changing the accessibility of the content served by Apache.
I've tried monitoring "log/development.log" in my rails application, and I've also poked around to see if I noticed any clues in any of the various log files under "/var/log", but nothing's jumping out at me.
I am not doing anything fancy here. I just want to get to the "Welcome Aboard!" screen for rails. I thought that getting started would be as simple as setting up the port-forwarding, creating the rails-application, and hitting it from my browser; it's been a few hours now and I'm getting nowhere with this. Apologies if this has a super easy solution that I'm just not seeing.
I am new to programming and Ruby on rails (and stackoverflow as well :) . I have setup an ubuntu test server. I can access my ruby application over internet which is configured on this server. I am using weBrick as webserver for my application.
I am able to start the Webrick server using command:
rails s -b ip address -p portnumber
through putty and then access my application over internet.
The problem is: when i close putty session after that I cannot access my application. the error that appears in chrome browser is
connection refused
It appears to me that the webserver(webrick) shutsdown when I disconnect putty which should not happen. Please correct me where ever I am interpreting the scenario incorrectly.
Also please let me know what additional information is required to seek the resolution. Thanks
I have an xUbuntu(14.04) virtualBox(4.3.15) server running on Windows 7. I have a 2 sites on the server and when I run rails server for either application it can be accessed internally at localhost:3000 without issue. However, when I access one app externally from a browser on the windows machine at the [virtualbox ip]:3000 the site renders without issue and the other displays 'cannot connect'. Additionally I can ping [virtualbox ip]:3000 for the one site, but the other will receive no response. Just the [virtualbox ip] can be pinged successfully when either site has rails server running.
Both sites are Rails 4.2.0.rc2, Ruby 2.0.0, and WEBrick 1.3.1.
Is there something that needs to be setup specifically so that the 2nd site works?
Haven't been able to locate any differences between the two which might cause an issue.
Was able to determine what the issue was. The one app was starting on http://0.0.0.0:3000 which to my understanding means it is listening on all interfaces, while the other app was starting on http://localhost:3000. The localhost app was therefore not listening for external requests. The solution was to start the rails server with the following.
rails server -b 0.0.0.0
This binds the app to the 0.0.0.0 ip address and I can now access it outside of my virtualbox xUbuntu instance by using [vm ip address]:3000 as the url.
I am learning Ruby on Rails with railstutorial.org
I had set everything up and working fine from Chapter 1. However, all of a sudden my next app has an issue.
I run "rails server"
=> Booting WEBrick
=> Rails 3.2.9 application starting in development on http://0.0.0.0:3000
=> Call with -d to detach
=> Ctrl-C to shutdown server
[2012-11-15 00:45:08] INFO WEBrick 1.3.1
[2012-11-15 00:45:08] INFO ruby 1.9.3 (2012-11-10) [x86_64-linux]
[2012-11-15 00:45:08] INFO WEBrick::HTTPServer#start: pid=2752 port=3000
Seems to be working fine, just like with my previous app.
However, I try connecting to localhost:3000 , 0.0.0.0:3000 , 127.0.0.1:3000 on various browsers and they all cannot establish a connection to the server.
Some things to note:
-I was able to connect to localhost just a while ago--it just seems like it suddenly stopped working out of the blue.
-My first app was working perfectly fine, but now it doesn't work for my first app either.
-I don't have firewalls blocking the port, and my hosts file is not the problem.
-I am on Ubuntu 12.10
I almost always find solutions via search, but not this time.. so I need some help please. It's very frustrating as I feel like it's a simple problem that I spent way too long being stuck on.
Thank you.
Try running it in some other port like say 3001 as:
rails server -p 3001
If its working than than try it again on 3000 as the command above.
I thing some other software is using your 3000 port that's why its not responding.
Or for some advanced things see here
with rails 4.2.0, the server binds to localhost by default, instead of 0.0.0.0. When working with a rails in a virtual box, accessing the server from the host computer, the binding address needs to be 0.0.0.0
Start rails server with -b0.0.0.0 to make the rails server accessible from the host computer/browser.
http://guides.rubyonrails.org/4_2_release_notes.html#default-host-for-rails-server
https://github.com/samuelkadolph/unicorn-rails/issues/12#issuecomment-60875268
Make sure you run rake db:create before launching rails s.
I'm using rails 5.0.0.beta3 and was running into this issue. #andrewleung's answer helped me a lot.
It seems like Rails default binding address is messed up on my computer (macOS 10.11.6) ; on some others, it works fine.
The simple solution is just to use rails server -b 127.0.0.1. You can then access your localhost:3000.
My guess here is (hinted from https://serverfault.com/a/544188) that localhost binding is messed up on my computer whereas 127.0.0.1 is more specific.
I had the same issues and i realized it was in the config/environment/production.rb file where config.assets.compile = false must be changed to config.assets.compile = true
However this might in a way render some javascript and sass elements unworking
The issue that it turned out I was having was that my VM had run out of hard drive space and there wasn't even enough left to create the server.pid file. For some reason though, it wasn't throwing an error for this, as the file was being created, but was left blank.
I run into the same issue. It turned out that browser-sync is also running on localhost:3000.
Due to some Rails developer would use browser-sync to test out the front end scripts quickly, I think that could be a popular reason that port 3000 is used.
check your /etc/hosts file..is ip 0.0.0.0 or localhost pointing to some other address.
for me...I was behind a proxy at work and had to do rails s -b 0.0.0.0 -p 3000
When I tried to follow the official "Getting Started" Ruby on Rails tutorial, it went wrong very quickly. Basically it said :
…navigate to http://localhost:3000. You should see Rails’ default information page.
But when I follow the instructions, I get
=> Rails 2.3.4 application starting on http://0.0.0.0:3000
After trying both addresses, I know that they point to the same thing, but can someone explain to me why Ruby on Rails uses http://0.0.0.0:3000 instead of http://localhost:3000?
Is there a way to always have the WEBrick server use localhost?
Localhost means quite literally "your local host", usually identified by 127.0.0.1 and all traffic to that address is routed via a loopback interface. If your Web server is listening for connections on 127.0.0.1, this means that it only accepts requests coming from the same host.
0.0.0.0 means that Rails is listening on all interfaces, not just the loopback interface.
0.0.0.0 means all interfaces. Including 127.0.0.1 a.k.a. localhost.
Just so everyone knows, my firefox browser correctly displays the locally hosted server if I access
http://localhost:3000/
but it does NOT display when I attempt to access
http://0.0.0.0:3000/
as recommended by Ruby. Clearly, in some sense, they are not equivalent.
I'm on Windows btw.
If you want localhost, one quick way is to specify the binding rails s -blocalhost (and the port with -pNNNN, more options with rails s --help).
My server started running by default on localhost for reasons to be investigated. As a result lvh.me stopped working, preventing me from specifying subdomains (eg: www.lvh.me:3000).
I "solved" this specifying the binding:
rails s -b0.0.0.0 # will work with lvh.me
Rails 4.1 Warning Message.
FYI, on Rails 4.1 you will get a warning message on boot that looks like this:
=> Run `rails server -h` for more startup options
=> Notice: server is listening on all interfaces (0.0.0.0). Consider using 127.0.0.1 (--binding option)
This indicates that binding to 0.0.0.0 is not recommended and instead you should use 127.0.0.1.
In Rails 4.2+ the Rails server default binding is to localhost instead of 0.0.0.0 or even 127.0.0.1.
For those of us using Nitrous.io virtual server envrionment for development, I believe we have to bind to 0.0.0.0 as there is no localhost per se.
Restarted the os works for me. (On Mac v 10.12)