using .net mvc 3 and trying to increase the allowable file upload size.
This is what I've added to web.config:
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules runAllManagedModulesForAllRequests="true">
<add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" preCondition="managedHandler" />
<add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" preCondition="managedHandler" />
<add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah" preCondition="managedHandler" />
</modules>
<handlers>
<add name="Elmah" path="elmah.axd" verb="POST,GET,HEAD" type="Elmah.ErrorLogPageFactory, Elmah" preCondition="integratedMode" />
</handlers>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="104857600"/>
</requestFiltering>
</security>
*ignore the elmah stuff.
it's still not allowing file sizes larger than 50MB and this should allow up to 100MB no?
any ideas?
In case other people stumble across this later on, you can also set a max file size for specific routes. This is what I have in my one project.
<configuration>
<!-- This will allow this setting only for this one action method. -->
<location path="Attachment/HandleUpload">
<system.web>
<!-- I needed to set for 20 MB. -->
<httpRuntime maxRequestLength="20480"/>
</system.web>
</location>
<!-- other configuration settings here, including appSettings -->
</configuration>
Related
I am using Elmah.MVC 2 with MVC3, ASP.NET 4.5 on Azure Websites.
I have set it up to log, via the web.config, to XML files on the webserver. This all works. However I want to stop it temporarily, as I believe it may be slowing the web server, since it is taking up time writing these error files. I plan to log to SQL Server. But for now I need to stop Elmah.
My Web.config Elmah sections are :
<sectionGroup name="elmah">
<section name="security" requirePermission="false" type="Elmah.SecuritySectionHandler, Elmah" />
<section name="errorLog" requirePermission="false" type="Elmah.ErrorLogSectionHandler, Elmah" />
<section name="errorMail" requirePermission="false" type="Elmah.ErrorMailSectionHandler, Elmah" />
<section name="errorFilter" requirePermission="false" type="Elmah.ErrorFilterSectionHandler, Elmah" />
</sectionGroup>
and
<add key="elmah.mvc.disableHandler" value="true" />
<add key="elmah.mvc.disableHandleErrorFilter" value="false" />
<add key="elmah.mvc.requiresAuthentication" value="true" />
<add key="elmah.mvc.IgnoreDefaultRoute" value="false" />
<add key="elmah.mvc.allowedRoles" value="Admin" />
<add key="elmah.mvc.allowedUsers" value="Admin" />
<add key="elmah.mvc.route" value="elmah" />
and
<httpModules>
<add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" />
<add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" />
<add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah" />
</httpModules>
and
<system.webServer>
<modules runAllManagedModulesForAllRequests="true">
<add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" preCondition="managedHandler" />
<add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" preCondition="managedHandler" />
<add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah" preCondition="managedHandler" />
</modules>
and
<elmah>
<security allowRemoteAccess="yes" />
<errorLog type="Elmah.SqlErrorLog, Elmah" connectionStringName="myDatabaseCS" />
<errorLog type="Elmah.XmlFileErrorLog, Elmah" logPath="~/App_Data" />
</elmah>
</configuration>
I thought this line stopped it:
<add key="elmah.mvc.disableHandler" value="true" />
But alas not. However I cannot get to the Elmah page ie /Elmah just returns me to the login page.
How can I stop Elmah logging?
Thanks.
EDIT 1:
it may be to do with this in Global.asa:
//filters.Add(new ElmahHandledErrorLoggerFilter());
filters.Add(new HandleErrorAttribute());
THe first line is commented out as I do not believe it is required in V2. All error handling is now merged with Elmah I believe.
Just remove the <errorLog> elements from your <elmah> section. Or comment it out. This will disable the logging functionality, and all you have to do to restore functionality when you want it is add those <errorLog> elements back in again. This way, you don't have to remove any of the core Elmah components that could lead to problems later on when you want to restore functionality, particularly if you miss something.
Just to note - removing <errorLog> from <elmah> in web.config does not stop the logging, it just reverts it to in-memory logging as described in this SO answer. (cannot comment on the accepted answer due to insufficient rep.)
If the intent is to stop logging entirely, you can use the Elmah's ErrorFilterModule (assuming that it is added in web.config) for that, like so (global.asax.cs excerpt):
protected void ErrorMail_Filtering(object sender, ExceptionFilterEventArgs e)
{
e.Dismiss();
}
I have a .NET application which uses some images stored in a folder on a server. the folder does not belong to my application. The images in this folder are used as background images of some div within the application. I published the image folder to the web along with my application and so everything work fine. However, Is there a way to limit the access of the folder to my .net application or a setting that can be set so that the content of the folder is not browsable/searchable? Right now, my application uses a url like www.domain.com/iisfoldername/picture.png to set the background of divs. Similarly if you use such URL in a browser, an image will be served. Is it possible to prevent this URL from being served when it is not requested from my application? That is, if someone enters this url in the browser, the image is not displayed, but the image displays when my application requests it.
I know of setting a authentication for a folder. But How can I limit an http request to a user and then impersonate this user(if possible)?
'
EDIT
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=5.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
<section name="system.identityModel" type="System.IdentityModel.Configuration.SystemIdentityModelSection, System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
<section name="system.identityModel.services" type="System.IdentityModel.Services.Configuration.SystemIdentityModelServicesSection, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
</configSections>
<appSettings>
<add key="webpages:Version" value="1.0.0.0" />
<add key="ClientValidationEnabled" value="true" />
<add key="UnobtrusiveJavaScriptEnabled" value="true" />
<add key="ida:FederationMetadataLocation" value="https:ccc.com/Federation.xml" />
<add key="ida:Issuer" value="https://ccc.com" />
<add key="ida:ProviderSelection" value="productionSTS" />
</appSettings>
<location path="Federation">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<system.web>
<authorization>
<deny users="?" />
</authorization>
<authentication mode="None" />
<compilation debug="true" targetFramework="4.5" />
<!--Commented by Identity and Access VS Package-->
<!--<authentication mode="Forms"><forms loginUrl="~/Account/LogOn" timeout="2880" /></authentication>-->
<pages>
<namespaces>
<add namespace="System.Web.Helpers" />
<add namespace="System.Web.Mvc" />
<add namespace="System.Web.Mvc.Ajax" />
<add namespace="System.Web.Mvc.Html" />
<add namespace="System.Web.Routing" />
<add namespace="System.Web.WebPages" />
</namespaces>
</pages>
<httpRuntime targetFramework="4.5" requestValidationMode="4.5" />
<profile defaultProvider="DefaultProfileProvider">
<providers>
<add name="DefaultProfileProvider" type="System.Web.Providers.DefaultProfileProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" applicationName="/" />
</providers>
</profile>
<membership defaultProvider="DefaultMembershipProvider">
<providers>
<add name="DefaultMembershipProvider" type="System.Web.Providers.DefaultMembershipProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" applicationName="/" />
</providers>
</membership>
<roleManager defaultProvider="DefaultRoleProvider">
<providers>
<add name="DefaultRoleProvider" type="System.Web.Providers.DefaultRoleProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" applicationName="/" />
</providers>
</roleManager>
<sessionState mode="InProc" customProvider="DefaultSessionProvider">
<providers>
<add name="DefaultSessionProvider" type="System.Web.Providers.DefaultSessionStateProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" />
</providers>
</sessionState>
</system.web>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-2.0.0.0" newVersion="3.0.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="itextsharp" publicKeyToken="8354ae6d2174ddca" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-5.4.3.0" newVersion="5.4.3.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.SqlConnectionFactory, EntityFramework" />
</entityFramework>
<connectionStrings>
</connectionStrings>
<system.webServer>
<modules>
<remove name="FormsAuthentication" />
<add name="WSFederationAuthenticationModule" type="System.IdentityModel.Services.WSFederationAuthenticationModule, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" preCondition="managedHandler" />
<add name="SessionAuthenticationModule" type="System.IdentityModel.Services.SessionAuthenticationModule, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" preCondition="managedHandler" />
</modules>
</system.webServer>
<system.identityModel>
<identityConfiguration>
<audienceUris>
<add value="https://localhost/App/" />
</audienceUris>
<!--Commented by Identity and Access VS Package-->
<!--<issuerNameRegistry type="System.IdentityModel.Tokens.ValidatingIssuerNameRegistry, System.IdentityModel.Tokens.ValidatingIssuerNameRegistry"><authority name="LocalSTS"><keys><add thumbprint="9B74CB2F320F7AAFC156E1252270B1DC01EF40D0" /></keys><validIssuers><add name="LocalSTS" /></validIssuers></authority></issuerNameRegistry>-->
<!--certificationValidationMode set to "None" by the the Identity and Access Tool for Visual Studio. For development purposes.-->
<certificateValidation certificateValidationMode="None" />
<issuerNameRegistry type="System.IdentityModel.Tokens.ValidatingIssuerNameRegistry, System.IdentityModel.Tokens.ValidatingIssuerNameRegistry">
<authority name="http://ccc.com">
<keys>
<add thumbprint="BA86062DD810B95F49FBF85F448507D63D15FB92" />
</keys>
<validIssuers>
<add name="http://ccc.com" />
</validIssuers>
</authority>
</issuerNameRegistry>
</identityConfiguration>
</system.identityModel>
<system.identityModel.services>
<federationConfiguration>
<cookieHandler requireSsl="true" />
<wsFederation passiveRedirectEnabled="true" issuer="https://ccc.com/" realm="https://localhost/App/" requireHttps="true" />
</federationConfiguration>
</system.identityModel.services>
</configuration>
Given your configuration, I believe your best option is to use URL rewriting. In this case, redirect users to a "fake" image if they are requesting images directly or as referred from some other website (but allowing access to them if referred from a page in your application).
To accomplish this, use Microsoft's IIS URL Rewrite extension, which you can download here:
http://www.iis.net/downloads/microsoft/url-rewrite
Once it is installed on your server, configure it by adding the following to your web.config (since you already have a system.webServer section in your web.config, just add the "rewrite" node into it). Note the inline comments and replacements required.
<system.webServer>
<rewrite>
<rules>
<rule name="Whitelist Image Access" stopProcessing="true">
<!-- Evaluated for all image file requests -->
<match url="(?:jpg|jpeg|png|gif|bmp)$" />
<conditions>
<!--
Rule applies when user tries to access URL directly (no referrer)
-->
<add input="{HTTP_REFERER}" matchType="Pattern" pattern="^$" ignoreCase="true" />
<!--
Rule does NOT apply when pages on our site are the referrer
*** NOTE: Replace "ccc" and "com" with appropriate parts form your domain ***
-->
<add input="{HTTP_REFERER}" matchType="Pattern" pattern="^https?://(.*\.)?ccc\.com/.*$" ignoreCase="true" negate="true" />
<!--
Rule does NOT apply when accessing the replacement image when real ones are refused
*** NOTE: replace "no_access.png" with the name of the "fake" image you want to use ***
-->
<add input="{REQUEST_FILENAME}" matchType="Pattern" pattern="no_access.png" ignoreCase="true" negate="true" />
</conditions>
<!--
Temporary redirect (status code 307) to "fake" image
*** NOTE: Replace the URL below with the "fake" image URL ***
-->
<action type="Redirect" url="http://ccc.com/images/no_access.png" appendQueryString="false" redirectType="Temporary" />
</rule>
</rules>
</rewrite>
</system.webServer>
I getting error on server while running "Failed to find or load the registered .Net Framework Data Provider.". I have Sql Compact 4 database included to ASP.NET MVC 4 + Entity Framework, uploading on godaddy server... web.config is following
Web.Config
<?xml version="1.0" encoding="utf-8"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=169433
-->
<configuration>
<configSections>
<!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=4.4.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<connectionStrings>
<add name="EShip" connectionString="Data Source=|DataDirectory|\EShip.sdf" providerName="System.Data.SqlServerCe.4.0" />
</connectionStrings>
<appSettings>
<add key="webpages:Version" value="2.0.0.0" />
<add key="webpages:Enabled" value="false" />
<add key="PreserveLoginUrl" value="true" />
<add key="ClientValidationEnabled" value="true" />
<add key="UnobtrusiveJavaScriptEnabled" value="true" />
</appSettings>
<system.web>
<compilation debug="true" targetFramework="4.0" />
<customErrors mode="Off"/>
<pages>
<namespaces>
<add namespace="System.Web.Helpers" />
<add namespace="System.Web.Mvc" />
<add namespace="System.Web.Mvc.Ajax" />
<add namespace="System.Web.Mvc.Html" />
<add namespace="System.Web.Optimization" />
<add namespace="System.Web.Routing" />
<add namespace="System.Web.WebPages" />
</namespaces>
</pages>
</system.web>
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
<modules runAllManagedModulesForAllRequests="true" />
<handlers>
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" />
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" />
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
</system.webServer>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.LocalDbConnectionFactory, EntityFramework">
<parameters>
<parameter value="v11.0" />
</parameters>
</defaultConnectionFactory>
</entityFramework>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="WebGrease" publicKeyToken="31bf3856ad364e35" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-1.3.0.0" newVersion="1.3.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-4.0.0.0" newVersion="4.0.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.WebPages" publicKeyToken="31bf3856ad364e35" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-2.0.0.0" newVersion="2.0.0.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
<system.data>
<DbProviderFactories>
<remove invariant="System.Data.SqlServerCe.4.0"/>
<add name="Microsoft SQL Server Compact Data Provider 4.0"
invariant="System.Data.SqlServerCe.4.0"
description=".NET Framework Data Provider for Microsoft SQL Server Compact"
type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=4.0.0.1,
Culture=neutral,
PublicKeyToken=89845dcd8080cc91"/>
</DbProviderFactories>
</system.data>
</configuration>
[/xml]
Using the comment of the OP, I have a slightly more verbose version.
With nuget in hand, one can run the command
install EntityFramework.SqlServerCompact
to download SqlServerCompact When I try that, I see 3 dependencies come along with that so you get 4 installs in total:
Microsoft.SqlServer.Compact
SqlServerCompact
EntityFramework
EntityFramework.SqlServerCompacy
It can therefore be inferred that a likely cause of running into this problem is missing SqlServerCompact for your installation.
I had a similar problem with a simple test app.
Install-Package EntityFramework.SqlServerCompact got rid of the message 'Failed to find or load the registered .Net Framework Data Provider' by adding SqlServer Compact dlls to the app 'packages' directory. It added the following to the packages.config;
<?xml version="1.0" encoding="utf-8"?>
<packages>
<package id="EntityFramework" version="5.0.0" targetFramework="net40-Client" />
<package id="EntityFramework.SqlServerCompact" version="4.3.6" targetFramework="net40-Client" />
<package id="Microsoft.SqlServer.Compact" version="4.0.8876.1" targetFramework="net40-Client" />
<package id="SqlServerCompact" version="4.0.8854.1" targetFramework="net40-Client" />
</packages>
It also added System.Data.SqlServerCe and System.DataSqlServerCe.Entity to the app references.
I then got an exception like this;
System.IO.FileLoadException was unhandled
Message=Could not load file or assembly 'System.Data.SqlServerCe, Version=4.0.0.1, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Source=mscorlib
FileName=System.Data.SqlServerCe, Version=4.0.0.1, Culture=neutral, PublicKeyToken=89845dcd8080cc91
FusionLog==== Pre-bind state information ===
LOG: User = mulcahy\mulcahy_admin
LOG: DisplayName = System.Data.SqlServerCe, Version=4.0.0.1, Culture=neutral, PublicKeyToken=89845dcd8080cc91
(Fully-specified)
LOG: Appbase = file:///C:/Users/mulcahy_admin/Dropbox/projects/ons/CSLCE4CL/CSLCE4CL/bin/Debug/
LOG: Initial PrivatePath = NULL
Calling assembly : System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089.
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\mulcahy_admin\Dropbox\projects\ons\CSLCE4CL\CSLCE4CL\bin\Debug\CSLCE4CL.vshost.exe.Config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Redirect found in application configuration file: 4.0.0.1 redirected to 4.0.0.1.
LOG: Post-policy reference: System.Data.SqlServerCe, Version=4.0.0.1, Culture=neutral, PublicKeyToken=89845dcd8080cc91
LOG: Attempting download of new URL file:///C:/Users/mulcahy_admin/Dropbox/projects/ons/CSLCE4CL/CSLCE4CL/bin/Debug/System.Data.SqlServerCe.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Revision Number
ERR: Failed to complete setup of assembly (hr = 0x80131040). Probing terminated.
This seems to suggest that the app is configured to use SqlServerCE v4.0.0.1 - but finds v4.0.0.0
So i used Eriks suggestion and changed the DbProviderFactories entry to say v4.0.0.0 and removed the bindingRedirect entry that refered to a new version at v4.0.0.1.
This seems to work. Hope it helps anyone following this path...
Meanwhile I'm a bit puzzled;
Why is the System.Data.SqlServerCe.dll at version 4.0.8876.1 - how could I know that this is actually v4.0.0.0
Where did the v4.0.0.1 reference come from - I must have this version somewhere on my machine?
I'm working on an MVC application. On my original draft of the service I had this method in one of my controllers:
[AcceptVerbs(HttpVerbs.Post)]
[ActionName("UpdateRelationship")]
public ActionResult UpdateRelationship(string aParameter)
And that worked fine. In the latest revision I've been asked to change this into a PUT request to differentiate it from a similar add mechanism which uses post. So I changed it to this:
[AcceptVerbs(HttpVerbs.Put)]
[ActionName("UpdateRelationship")]
public ActionResult UpdateRelationship(string aParameter)
And suddenly I'm getting a 404 on my requests, all from just changing the AcceptVerbs. From the look of the error, it appears as though IIS is trying to route the request as a standard webforms page rather than using MVC extensionless url re-writing.
Googling this it seems that a common cause is browsers not allowing PUT requests but I'm not using a browser to test this - I'm using Fiddler. So there should be no problem there. I also think the correct settings are already in the web.config:
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
<modules runAllManagedModulesForAllRequests="true">
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="UrlRoutingHandler" />
<remove name="MvcHttpHandler" />
<remove name="WebDAV" />
<add name="MvcHttpHandler" preCondition="integratedMode" verb="*" path="*.mvc" type="System.Web.Mvc.MvcHttpHandler, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</handlers>
<security>
<requestFiltering>
<verbs>
<add verb="PUT" allowed="true" />
</verbs>
</requestFiltering>
</security>
</system.webServer>
So what have I missed?
EDIT: This code works on a colleagues' machine. So it looks like my local setup of IIS as at fault. Still at a loss to explain what I need to change though - any ideas?
Cheers,
Matt
I had to remove the WebDav Module completely a stated in this blog post
<configuration>
<system.webServer>
<handlers>
<remove name="WebDAV" />
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" />
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" />
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
<modules>
<remove name="WebDAVModule" />
</modules>
</system.webServer>
</configuration>
After much fruitless searching and blind alleys involving WebDAV I found the answer on another SO family site :)
https://serverfault.com/questions/93424/how-to-enable-put-and-delete-in-iis7
The configuration that worked for us was the following.
<system.webServer>
<modules runAllManagedModulesForAllRequests="false">
<remove name="UrlRoutingModule" />
<add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" preCondition="" />
</modules>
<handlers>
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,POST,PUT,DELETE" type="System.Web.Handlers.TransferRequestHandler" resourceType="Unspecified" requireAccess="Script" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
</system.webServer>
This is specific to extension-less URLs.
BTW the general recommendation is to set runAllManagedModulesForAllRequests = false.
So I've been using elmeh forever.
I've got an app I've recently converted to MVC3 .net4, and vs2010, and it's developed on a server 2008 box (as opposed to my other apps developed on an XP box).
I set up elmah normally and it does not work...
I've got a reference to ELMAH.dll already, it's in my CommonDLLs folder.
I add the sectiongroups
<sectionGroup name="elmah">
<section name="security" requirePermission="false" type="Elmah.SecuritySectionHandler, Elmah" />
<section name="errorLog" requirePermission="false" type="Elmah.ErrorLogSectionHandler, Elmah" />
<section name="errorMail" requirePermission="false" type="Elmah.ErrorMailSectionHandler, Elmah" />
<section name="errorFilter" requirePermission="false" type="Elmah.ErrorFilterSectionHandler, Elmah" />
</sectionGroup>
I add the sections
<elmah>
<security allowRemoteAccess="1" />
<errorLog type="Elmah.XmlFileErrorLog, Elmah" logPath="~/ELMAH" />
<!--<errorLog type="Elmah.XmlFileErrorLog, Elmah" logPath="~/App_Data" />-->
<errorMail from="change.me#CCCC.org" to="brown.ericw#CCCC.org" subject="Application: StudentPortal3G, Environment:Dev, ServerBoxName: Dev" async="true" />
</elmah>
I add the module and handlers
<httpHandlers>
<add verb="*" path="*.pdfx" type="JCDCHelper.Web.UI.RunAsASPXHandler, JCDCHelper.Web" />
<add verb="*" path="*.mvc" validate="false" type="System.Web.Mvc.MvcHttpHandler, System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add verb="POST,GET,HEAD" path="elmah.axd" type="Elmah.ErrorLogPageFactory, Elmah" />
</httpHandlers>
<httpModules>
<add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" />
<add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" />
</httpModules>
I add the SMTP section for Email support
<system.net>
<!--Required for Elmah Mail Processing-->
<mailSettings>
<smtp deliveryMethod="Network">
<network host="10.10.10.10" port="25" defaultCredentials="true" />
</smtp>
</mailSettings>
</system.net>
I goto the "~\ELMAH" folder, select my machine, and give the network service account full control of the folder (did the same for Everyone, just in case)
I set up the routing for elmah.axd to go throguh as a web page.
routes.IgnoreRoute("elmah.axd");
I add a location tag, so I can hit elmah.axd without being logged in
<location path="elmah.axd">
<system.web>
<authorization>
<!--<deny users="?" /> in prod and qa change to this, otherwise anyoen can look at the logs - EWB-->
<allow users="*" />
</authorization>
</system.web>
</location>
But I get nothing, no elmah emails, no XML logs in the ELMAH folder, and a 404 when I goto elmah.axd
What am I missing? ANy help is appreaicted.
Thanks,
Cal-
Under IIS7 you need to add the httpHandlers and httpModulea under the system.webserver node of the web.config.
This thread should help: http://groups.google.com/group/elmah/browse_thread/thread/4bbef2f26e0c5fd1