I am trying to run Latex on Solaris 10/x86. I have successfully installed the tetex3.0 from sunfree. When I run Latex I get the following error:
ld.so.1: pdfetex: fatal: libstdc++.so.5: open failed: No such file or directory
and ldd pdfetex shows:
libstdc++.so.5 => (file not found)
I have the latest version (libstdc++.so.6) and tried to link libstdc++.so.5 to .6 however, the libstdc++.so.5 is not even installed in my machine. Is there a way to change the dependency from version 5 to 6? Or any other way around this problem? Thanks.
I think you missed their note stating that
[..] that you have the /usr/local/lib/libstdc++.so.5 and /usr/local/lib/libgcc_s.so.1 related files either from the gcc-3.3.2 or libgcc-3.3 or higher packages
Did you install [lib]gcc as well?
Related
I am currently attempting to run an xcode project that creates a Vapor server for the ios application, however, I get an error complaining that 'openssl/conf.h' file is not found. I also get Could not build Objective-C module 'CNIOOpenSSL' on the import package, but I suspect that this is linked to the file not being found by the compiler. I have already brew installed vapor using these instructions https://stackoverflow.com/que[enter image description here]1stions/43070534/openssl-ctls-trouble-with-vapor-2, but no luck. I also installed openssl and libressl, but same results. Any suggestions on what I may be missing? I've linked screenshots of the error below.enter image description here
For me it was installing old version of openssl - openssl 1.1 and setting
echo 'export PATH="/usr/local/opt/openssl#1.1/bin:$PATH"' >> ~/.bash_profile
I am trying to create a class diagram with sphinx. For this I created a virtual environment in Pycharm and added this to conf.py:
extensions = ['sphinx.ext.autodoc','sphinx.ext.inheritance_diagram']
In my spamfilter.rst file I added the following lines:
Diagrams
=================
.. inheritance-diagram:: spamfilter
The output is not a diagram and looks like this.
The following warning is displayed:
WARNING: dot command 'dot' cannot be run (needed for graphviz output), check the graphviz_dot setting
When I look into the folder C:\Users\Name\PycharmProjects\documentation\venv\Lib\site-packages\graphviz, there is a dot.py file, so I do not understand what is wrong. A similar question for Mac OS has been asked here. I tried the solution but it seems like it only works for Mac, because when I paste export PATH=$PATH:~/opt/bin to the Pycharm Terminal, it tells me that the command export could not be found. Honestly I have problems understanding why sometimes you can just use packages and other times they cannot be found even when they are installed, I am self-taught and a beginner.
The "pip install graphviz" command installs a Python package that provides an interface to Graphviz (https://pypi.org/project/graphviz). This package is not required by Sphinx.
In order to create inheritance diagrams with Sphinx, the actual Graphviz toolkit (including dot.exe) must be installed. See https://www.graphviz.org.
If dot.exe is not in the PATH, you can use the graphviz_dot configuration option.
I had the same problem where rendering a C4 model with PlantUML didn't work in the IDE (PyCharm 2022.2.1 Pro) on a newer M1 MacOS Monterey. I had it working on a Big Sur intel Mac prior to the upgrade with no extra effort, so the chip change caused me to go down a lot of paths with Rosetta and so on that were all unsuccessful.
The error was:
Dot Executable: /opt/local/bin/dot
File does not exist
Cannot find Graphviz.
Graphviz was installed correctly, and dot was on my path, but it wasn't in /opt/local/bin/dot. Since it was in /opt/homebrew/bin/dot, all I needed to do was link the actual file with the path it was searching for:
cd /opt
sudo ln -s homebrew local
et voilà, PyCharm is now correctly rendering the puml in the IDE.
I'm trying to install Wine on my Mac via Brew. I'm using Catalina and just updated brew, installed XQuartz and have Xcode installed. When I type the command "Brew install wine" it returns the following:
Error: No available formula with the name "wine"
==> Searching for a previously deleted formula (in the last month)...
Warning: homebrew/core is shallow clone. To get complete history run:
git -C "$(brew --repo homebrew/core)" fetch --unshallow
wine was deleted from homebrew/core in commit 82bd38bc:
wine: delete
To show the formula before removal run:
git -C "$(brew --repo homebrew/core)" show 82bd38bc^:Formula/wine.rb
If you still use this formula consider creating your own tap:
https://docs.brew.sh/How-to-Create-and-Maintain-a-Tap
I'm following this tutorial: https://www.davidbaumgold.com/tutorials/wine-mac/
When I run Brew doctor I get the following:
Please note that these warnings are just used to help the Homebrew maintainers
with debugging if you file an issue. If everything you use Homebrew for is
working fine: please don't worry or file an issue; just ignore this. Thanks!
Warning: "config" scripts exist outside your system or Homebrew directories.
`./configure` scripts often look for *-config scripts to determine if
software packages are installed, and which additional flags to use when
compiling and linking.
Having additional scripts in your path can confuse software installed via
Homebrew if the config script overrides a system or Homebrew-provided
script of the same name. We found the following "config" scripts:
/Library/Frameworks/Python.framework/Versions/3.7/bin/python3.7-config
/Library/Frameworks/Python.framework/Versions/3.7/bin/python3.7m-config
/Library/Frameworks/Python.framework/Versions/3.7/bin/python3-config
Warning: Unbrewed dylibs were found in /usr/local/lib.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected dylibs:
/usr/local/lib/libtcl8.6.dylib
/usr/local/lib/libtk8.6.dylib
Warning: Unbrewed header files were found in /usr/local/include.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected header files:
/usr/local/include/fakemysql.h
/usr/local/include/fakepq.h
/usr/local/include/fakesql.h
/usr/local/include/itcl.h
/usr/local/include/itcl2TclOO.h
/usr/local/include/itclDecls.h
/usr/local/include/itclInt.h
/usr/local/include/itclIntDecls.h
/usr/local/include/itclMigrate2TclCore.h
/usr/local/include/itclTclIntStubsFcn.h
/usr/local/include/mysqlStubs.h
/usr/local/include/odbcStubs.h
/usr/local/include/pqStubs.h
/usr/local/include/tcl.h
/usr/local/include/tclDecls.h
/usr/local/include/tclOO.h
/usr/local/include/tclOODecls.h
/usr/local/include/tclPlatDecls.h
/usr/local/include/tclThread.h
/usr/local/include/tclTomMath.h
/usr/local/include/tclTomMathDecls.h
/usr/local/include/tdbc.h
/usr/local/include/tdbcDecls.h
/usr/local/include/tdbcInt.h
/usr/local/include/tk.h
/usr/local/include/tkDecls.h
/usr/local/include/tkPlatDecls.h
Warning: Unbrewed .pc files were found in /usr/local/lib/pkgconfig.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected .pc files:
/usr/local/lib/pkgconfig/tcl.pc
/usr/local/lib/pkgconfig/tk.pc
Warning: Unbrewed static libraries were found in /usr/local/lib.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected static libraries:
/usr/local/lib/libtclstub8.6.a
/usr/local/lib/libtkstub8.6.a
I'm not sure these warnings has something to do with it.
Thanks in advance!
I was able to build Wine 64 bit from source on macOS Catalina and successfully run Notepad++ 64 bit on it.
My steps were more or less something like that:
Download Wine 4.20 from https://dl.winehq.org/wine/source/4.x/wine-4.20.tar.xz
Extract it
In terminal go to extracted directory
Run: ./configure --enable-win64
It showed that it cannot find some library (I do not remember what exactly) so I installed it with macports (sudo port install name_of_missing_package reported by ./configure)
After I was able to run ./configure --enable-win64 succesfully without errors in terminal run: make
It compiled after more than 30 minutes.
I run it with: ./wine start
It opened windows console and here I was able to cd to Notepad++ 64 bit directory (downloaded from https://notepad-plus-plus.org/repository/7.x/7.0/npp.7.bin.x64.zip note that newest version did not work and throwed some errors about some dll's)
I typed notepad++ to run exe file
It showed some errors about freetype fonts so I installed them with macports and I had to copy them from /opt/X11/lib to /usr/local/lib before wine detected them
After fixing freetype fonts problem I was able to run notepad++
Also you might want to run: sudo spctl --master-disable to disable gatekeeper if you will see some system alerts about loading app from unknown developer.
Also note that instead of ./wine start you can run ./wine explorer for graphical file manager instead of console
Those steps might not be exactly precise, as I'm not sure if I did not miss something but hope it will help someone.
Also note that obviously wine on macOS Catalina will be able to run only some 64 bit windows apps and all 32 bit windows app will not work. I also tested it with IrfanView 64 bit (https://www.fosshub.com/IrfanView.html?dwl=iview453_x64_setup.exe) and it also works fine.
In case you wanted to get wine working for purpose of running 32 bit games then unfortunately it will not work with wine but you can try with virtualbox. You can check https://www.youtube.com/watch?v=3AO8dF0vviQ for some performance improvements tips.
Wine hast been removed from homebrew due to the incompatibility to Macos Catalina
https://discourse.brew.sh/t/issue-with-wine/6188/3
Try using wine64 to run your .exe files after installing wine. The manuals and references don't seem to mention this explicitly.
More Info
I followed the guidance in the wine manual to install using home-brew. After install, I got an error when trying to test the installation like it says in the quickstart.
Install wine-stable using homebrew
brew tap homebrew/cask-versions
brew install --cask --no-quarantine wine-stable
After install, test by opening notepad
wine notepad
zsh: bad CPU type in executable: wine
While uninstalling wine, I noticed one of the linked libraries was called wine64. I immediately reinstalled and tried again using wine64 as the call, as I am using wine on an M1 Mac. This was successful!
You can also use winehelp to get access to more commands that will work with 64bit processor.
Based on https://github.com/Homebrew/homebrew-core/pull/46556#issuecomment-559938873 you can do brew cask install wine-stable on newer version of OS X. And works with recent versions of homebrew since the source version was moved :(
How to install wine on Mac OS Catalina with brew
install homebrew with
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
install xquartz to install wine using brew
brew cask install xquartz
install wine using brew
brew install homebrew/cask-versions/wine-devel
run wine and check the version
wine64 --version
As of Wine 5.0 there is no 32bit support on mac in the official version, but you are able to achieve it via the
Unofficial Wineskin Winery
You can download it from github releases here. And then create a Wineskin with WS11WineCX[64/32]bit19.0.[0/1]. All WS11 versions support Catalina. To use it you also need to turn off the no32exec boot argument. You theoretically can do it by typing:
sudo nvram boot-args="no32exec=0"
into the Terminal while you're logged in but it didn't work out for me, so if you'll have the same problem, reboot into the Recovery mode, in the menubar pick Utilities -> Terminal and type just:
nvram boot-args="no32exec=0"
(without sudo).
Example
To be more exact, to install eg. Steam 32bit, you would:
Install the Unofficiall Wineskin Winery from the provided link
Turn on the 32bit execution boot argument by going into Recovery Mode and entering nvram boot-args="no32exec=0" into the terminal
Open Wineskin, click the '+' sign and scroll down to find the WS11WineCX64bit19.0.1 (the newest version with 64 and 32 bit support, at the time of writing)
Click update/install under the Wrapper Version.
Click Create New Blank Wrapper, name it and click through installation of mono and gecko.
Launch the Wrapper App from Finder. Click Install Software, choose setup executable, and proceed through installation. Then pick the executable from a menu. (In case of steam, Steam.exe)
Note: If you get the "No windows app to open the file"(Like I did) error, click advanced -> configuration and set the Windows EXE to the path to the installer. Then find the place that it has installed in and set that as Windows EXE. Then you can run by clicking Test Run.
Enjoy your windows app, as an .app file!
Hope I helped!
I have got a fresh install of Delphi 2010 on Windows 8.1.
I create a new project, and under Packages, I select "Build with runtime packages".
I compile it and immediately get the error
"[dcc Fatal Error] E2202 Required package 'IndyCore' not found"
I have checked: The package IndyCore140.bpl is available in the $BDS\bin directory as are all the other Indy related packages. The IndyCore.dcp file is also available in $BDS\lib and $BDS\lib\debug.
This is driving me nuts. Any hints?
This is the command line I get when I enable the "Show command line" option (line breaks added for readability):
dcc command line for "Project2.dpr"
c:\delphi\delphi2010\bin\dcc32.exe
--no-config
-LUrtl;vcl;vclx;vclimg;vclactnband;dbrtl;vcldb;vcldbx;bdertl;vcltouch;xmlrtl;
dsnap;dsnapcon;TeeUI;TeeDB;Tee;adortl;VclSmp;vclie;inet;inetdb;webdsnap;
websnap;inetdbbde;inetdbxpress;soaprtl;DbxCommonDriver;DbxClientDriver;
DBXInterBaseDriver;DBXMySQLDriver;dbexpress;dbxcds;tdbf;intrawebdb_100_140;
Intraweb_100_140;IndyCore;IndySystem;IndyProtocols
-M
-Q
-AWinTypes=Windows;WinProcs=Windows;DbiTypes=BDE;DbiProcs=BDE;DbiErrs=BDE
-DDEBUG
-Ic:\delphi\delphi2010\lib;"C:\Users\Public\Documents\RAD Studio\7.0\dcp"
-LE"C:\Users\Public\Documents\RAD Studio\7.0\Bpl"
-LN"C:\Users\Public\Documents\RAD Studio\7.0\Dcp"
-NB"C:\Users\Public\Documents\RAD Studio\7.0\Dcp"
-Oc:\delphi\delphi2010\lib;"C:\Users\Public\Documents\RAD Studio\7.0\dcp"
-Rc:\delphi\delphi2010\lib;"C:\Users\Public\Documents\RAD Studio\7.0\dcp"
-Uc:\delphi\delphi2010\lib;"C:\Users\Public\Documents\RAD Studio\7.0\dcp"
-K00400000
-NO"C:\Users\Public\Documents\RAD Studio\7.0\Dcp"
Project2.dpr
There is nothing suspicious I could find.
EDIT: Stefan Glienke suggested on Google+ to check the PATH environment variable, because it might be too long. It was around 1400 characters long. I reduced it to the bare minimum, 224 characters, but it didn't solve the problem.
The question was answered by Daniela Osterhagen in a Google+ post that is no longer available:
It's probably the indycore.dcp file that the compiler cannot find. Is that file in the library path?
No, it's not! Look at the command line you posted! It doesn't contain
c:\delphi\delphi2010\lib\indy10 !
I just temporarily removed that directory from the library path in my Delphi 2010 installation and got the same error.
As it turned out, that was exactly the problem. $(BDS)\libs\Indy10 was missing from the library path. I have no idea how that came to happen, because as said above, this was a fresh install.
(links removed, Google+ is no longer available and the Internet Archive hasn't got them either)
After the update to the version 0.3.1_r17328 of Dart SDK and Dart Editor I have some trouble to import some library particulary Args library. I have the same problem both directly importing Args or importing Web_ui where Args is one of the dependencies.
Here is my pubspec.yaml:
name: notes
description: A sample application
dependencies:
web_ui: 0.3.0+1
or:
name: notes
description: A sample application
dependencies:
args: 0.3.1+1
Here is the error generate from build.dart
Unable to open file: C:/Users/Fabio/Dropbox/progetti/note/packages/args/args.dart'package:web_ui/component_build.dart': Error: line 25 pos 1: library handler failed
import 'package:args/args.dart';
'file:///C:/Users/Fabio/Dropbox/progetti/note/build.dart': Error: line 1 pos 1: library handler failed
import 'package:web_ui/component_build.dart';
I solved the problem. It seems that the Cache folder (Pub) has been corrupted.
I have deleted the folder Cache: C:\Users\<UserName>\AppData\Roaming\Pub
Then i run pub install from command line and it works.
Unfortunately, I was getting the same error with my windows XP machine.
In the end, I logged into my windows 7 machine and was able to
download the packages, zipped them up and pasted the libraries into my
windows XP dart editor. Success!
I had no reason to believe I had the exact proxy issue #shindokaku had as I am using my home computer.
I tried all the suggestions on deleting the .cache files, pub.lock files and the packages folder and retrying. I uninstalled dart editor and tried again. I also tried using the git resources to download web-ui and running commands through the command line to no avail
Including suggestions in this similar questions:
cannot-find-referenced-source-packages
is-there-a-workaround-for-pub-dependency-resolution-through-proxies
This problem has been haunting me over and over for a few weeks. I am not using Windows, so this answer is not intended to help the original poster who is using Windows 7.
If you are using Linux here are the steps I use to repair corrupted pub cache.
Go to the top level directory of your app. You should see at least pubspec.lock, pubspec.yaml, a folder named packages, and a folder named web.
Delete your pubspec.lock, and packages folder.
[Make sure you aren't storing your own libraries in the packages folder]
cd ~/dart/myApp/
rm -r packages
rm pubspec.lock
Now once you have removed these files:
pub cache repair
Note 1: if your dart-sdk is not in your systems $PATH, than you will want to use the absolute path to the sdk when using the above command. Comment if you need that explained.
Note 2: This is working solution with Dart 1.5.3. I have not tested this on earlier versions.
Try deleting your pubspec.lock file and packages directory in the root folder of the project. Then run pub install again, when things get wacky thats what I do.
You should try to run pub update. I have sometimes found that this doesn't work as expected from the editor, but generally works quite smoothly when called from the command line.