i have a Searchbar with a Scopebar in my RootViewController. If I am searching for the items it's working very fine, also if I searching in a Scope Range. But how is it possible to show Scope Results, if no Searchtext was given from the User?
A Code Sample would be very fine.
Here is the Code which filter after the User set Text into the Seachbar.
- (void)filterContentForSearchText:(NSString*)searchText scope:(NSString*)scope
{
[self.filteredContent removeAllObjects]; // First clear the filtered array.
for (test *new in tabelle)
{
//cat1
if ([scope isEqualToString:#"cat1"] && [new.Location isEqualToString:#"cat1"])
{
NSComparisonResult result = [new.TText compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])];
if (result == NSOrderedSame)
{
[self.filteredContent addObject:new];
}
}
//cat2
if ([scope isEqualToString:#"cat2"] && [new.Location isEqualToString:#"cat2"])
{
NSComparisonResult result = [new.TText compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])];
if (result == NSOrderedSame)
{
[self.filteredContent addObject:new];
}
}
//all
if ([scope isEqualToString:#"Alle"])
{
NSComparisonResult result = [new.TText compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])];
if (result == NSOrderedSame)
{
[self.filteredContent addObject:new];
}
}
}
}
I want results without any typed letter in the Searchbar
Like this image but without the typed in letter: http://edumobile.org/iphone/wp-content/uploads/2010/03/search.jpg
Related
The method crashes in iOS9.1 worked earlier. It is called from
(BOOL)searchDisplayController:(UISearchDisplayController *)controller shouldReloadTableForSearchString:(NSString *)searchString
The method is
- (void)filterContentForSearchText:(NSString*)searchText
{
[self.searchResults removeAllObjects]; // First clear the filtered array.
for (NSArray *contactsInSection in self.sections)
{
for (Contact *contact in contactsInSection)
{
NSArray *substringArray = [[contact displayName] componentsSeparatedByString:#", "];
for (NSString *substring in substringArray)
{
NSComparisonResult result = [substring compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])];
if (result == NSOrderedSame)
{
[self.searchResults addObject:contact];
break;
}
}
}
}
}
The line that crashes is the line with the comparison: [substring compare:searchText.... ];
The problem occurs in iOS9.1 with iPhone6 device. Works with iPhone5!!!
Here is a screenshot from the compiler
The problem is your range
range:NSMakeRange(0, [searchText length])];
is longer than the receiver: searchText = #"Po" is 2-character long, while substring = #"n" is only 1-character long. Therefore the method will raise an exception:
range: The range of the receiver over which to perform the comparison. The range must not exceed the bounds of the receiver.
IMPORTANT
Raises an NSRangeException if range exceeds the bounds of the receiver.
(ref: iOS API reference)
Perhaps you should first check searchText.length <= substring.length?
I have a tableview that filters based on a search bar. This works well as long as the search begins with the same characters as the cell text.
I would like to be able to search any part of the cell text, even in the middle. For example. If the cell text is "Jon Bon Jovi" I would like it to still come up if the user types "Bon Jovi" or even just "Jovi" into the search bar.
My current code is below:
for (NSDictionary *item in listItems)
{
if ([scope isEqualToString:#"All"] || [[item objectForKey:#"type"]
isEqualToString:scope] || scope == nil)
{
NSComparisonResult result = [[item objectForKey:#"name"]
compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch)
range:NSMakeRange(0, [searchText length])];
if (result == NSOrderedSame)
{
[filteredListItems addObject:item];
}
}
}
Any help would be awesome. Thank you all!
Instead of using -compare:options:range: (which just sorts your search string relative to your item's name), consider looking at -rangeOfString:options: - that will actually search the entire item name for your search string. You would replace the inner body of your if statement with something like:
NSStringCompareOptions opts = (NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch);
NSRange resultRange = [[item objectForKey:#"name"] rangeOfString:searchText
options:opts];
if (resultRange.location != NSNotFound) {
[filteredListItems addObject:item];
}
I have the method below for filtering some results:
Currently it does this:
array: alpha, apple, aries, bravo
type a:
alpha
apple
aries
type l (now al)
alpha
I wanted to do this:
new search:
type p=
alPha
apple
below is the code
thank you kindly in advance
-(void) filterResults:(NSString *)searchText{
NSMutableArray *test = [NSMutableArray arrayWithArray:self.listContent];
[self.filteredListContent removeAllObjects]; // First clear the filtered array.
for (int i=0; i<[test count]; i++) {
NSString *stringResult = [test objectAtIndex:i];
NSComparisonResult result = [stringResult compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])];
if (result == NSOrderedSame){
[self.filteredListContent addObject:stringResult];
}
}
[self.filteredListContent sortUsingSelector:#selector(localizedCaseInsensitiveCompare:)];//sort alphabetically
NSLog(#"filtered results = %#",self.filteredListContent);
}
To find the letter anywhere in your string, replace this:
NSComparisonResult result = [stringResult compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])];
if (result == NSOrderedSame){
[self.filteredListContent addObject:stringResult];
}
with this:
NSRange range = [stringResult rangeOfString:searchText];
if (range.location != NSNotFound) {
[self.filteredListContent addObject:stringResult];
}
Note that it will have to find all of the characters, in order.
If you want to find any of the characters, then use rangeOfCharacterFromSet:.
Try this one.
NSPredicate *predicate = [NSPredicate predicateWithFormat:[NSString stringWithFormat:#"SELF beginswith '%#'", searchText]];
self.filteredListContent = [self.listContent filteredArrayUsingPredicate:predicate];
Hope this helps you.
I am searching my products like the below. It works fine however when searching between 2 words the results disappear then reappear once the user has entered the first character of the next word. i.e if I search "td pro" or "pro td" the results are there. If I search like this td(i have a result) td(space) I have NO result td p(I have a result) just to add I need to separate the words by space in componentsSeperatedByString because the user may not search for a product in any particular order. Unless there is a better method?
Here is my code:
- (void)filterContentForSearchText:(NSString*)searchText scope:(NSString*)scope
{
[self.filteredListContent removeAllObjects]; // First clear the filtered array.
for (XMLStringFile *new in rssOutputData_MutableArray)
{
//Product scope
if ([scope isEqualToString:#"Product"])
{
// Split into search text into separate "words"
NSArray * searchComponents = [searchText componentsSeparatedByString: #" "];
;
BOOL foundSearchText = YES;
// Check each word to see if it was found
for (NSString * searchComponent in searchComponents) {
NSRange result = [new.xmlItem rangeOfString:searchComponent options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch)];
NSRange descriptionRange = [new.xmlDescription rangeOfString:searchComponent options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch)];
foundSearchText &= (result.location != NSNotFound|| descriptionRange.location != NSNotFound);
}
// If all search words found, add to the array
if (foundSearchText)
{
[self.filteredListContent addObject: new];
}
}
}
}
Many thanks
I fixed it with the help of another stack question that someone helped me with.
- (void)filterContentForSearchText:(NSString*)searchText scope:(NSString*)scope
{
[self.filteredListContent removeAllObjects]; // First clear the filtered array.
for (XMLStringFile *new in rssOutputData_MutableArray)
{
//Product scope
if ([scope isEqualToString:#"Product"])
{
// Split into search text into separate "words"
NSArray * searchComponents = [searchText componentsSeparatedByString: #" "];
//Before searching trim off the whitespace
searchText = [searchText stringByTrimmingCharactersInSet: [NSCharacterSet whitespaceCharacterSet]];
BOOL foundSearchText = YES;
// Check each word to see if it was found
for (NSString * searchComponent in searchComponents) {
NSRange result = [new.xmlItem rangeOfString:searchComponent options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch)];
NSRange descriptionRange = [new.xmlDescription rangeOfString:searchComponent options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch)];
foundSearchText &= (result.location != NSNotFound|| descriptionRange.location != NSNotFound);
}
// If all search words found, add to the array
if (foundSearchText)
{
[self.filteredListContent addObject: new];
}
}
}
}
The winning line is:
//Before searching trim off the whitespace
searchText = [searchText stringByTrimmingCharactersInSet: [NSCharacterSet whitespaceCharacterSet]];
This is my current search code.
-(void)filterContentForSearchText:(NSString *)searchText scope:(NSString *)scope {
[filteredList removeAllObjects];
for(Location *item in list)
{
NSRange result = [item.title rangeOfString:searchText options:NSCaseInsensitiveSearch range:NSMakeRange(0, [searchText length])];
if(result.location != NSNotFound)
{
[filteredList addObject:item];
}
}
}
How would I change this to match any part of the title and not just the start.
Example:
At the moment if I search for 'Las', 'Las Vegas' will appear in the list, but when I search for 'Vegas' it does not.
I want the search term 'Vegas' to come back with 'Las Vegas'
Thanks,
Ashley
Use rangeOfString:options: instead of rangeOfString:options:range:. It is the range parameter that restricts the search to the beginning of the string.
Or if for some reason you want to use rangeOfString:options:range: then use this as range: NSMakeRange(0, [item.title length])