I have a .eps file that I can look at in Photoshop, and it has a very high resolution, sharp edges, etc. at even larger than 1024x1024.
With ImageMagick I want to convert this .eps to a 1024x1024 .jpg with very high resolution.
However, with the following command, the image is very blurry:
convert -resize "1024x1024" -colorspace RGB -flatten test.eps test.jpg
What ImageMagick parameters do I have to use so that the resulting .jpg is 1024x1024 and a high quality, sharp image?
here's some XMP data we found, perhaps what is causing it to not be resized with -size:
For vector graphics, ImageMagick has both a render resolution and an output size that are independent of each other.
Try something like
convert -density 300 image.eps -resize 1024x1024 image.jpg
Which will render your eps at 300dpi. If 300 * width > 1024, then it will be sharp. If you render it too high though, you waste a lot of memory drawing a really high-res graphic only to down sample it again. I don't currently know of a good way to render it at the "right" resolution in one IM command.
The order of the arguments matters! The -density X argument needs to go before image.eps because you want to affect the resolution that the input file is rendered at.
This is not super obvious in the manpage for convert, but is hinted at:
SYNOPSIS
convert [input-option] input-file [output-option] output-file
Maybe you should try it with -quality 100 -size "1024x1024", because resize often gives results that are ugly to view.
Related
im trying to resize image from 72x72 to 512x512 with following command
convert input.png -resize 512x512 output.png
but the output image (output.png) become blur
how to prevent resized images from becoming blurred
how to prevent resized images from becoming blurred
If you want a pixelated image of the original use -sample
# Create small image.
convert -size 72x72 plasma: 72x72.png
# Magnify the image with pixel subsampling.
convert 72x72.png -sample 512 512x512_sample.png
It's true that you can't restore missing data when upscaling images, but there's a lot of various algorithms to calculate what may be missing.
Try using the -filter option in addition to -resize, and checkout the wonderful usage examples here.
Probably the best you can do is use a sharper -filter such as catrom and then do post processing using -unsharp.
convert input.png -filter catrom -resize 512x512 -unsharp 0xSigma output.png
where sigma is the sharpening value, try sigma=1 or 2 (or as desired)
But it will not maintain the same quality as the input as others have mentioned above.
See -unsharp at http://www.imagemagick.org/script/command-line-options.php#unsharp
You can't. For an equal sharpness, you would need more data in the bigger image. Since you have only the data from a small image the result is blurred.
Look at it the other way, if what you asked was possible, instead of compressing the 512x512 image, we would first scale it down to 72x72, compress that (much smaller file) and sent it over with instructions to scale it up to 512x512.
I've read the ImageMagick documentation here and here and been unable to achieve a couple of simple tasks. Would appreciate any simple pointers or direction, or even commands I can execute that will work on Linux.
I want to convert any image-type (JPG, GIF, PNG, TIFF) to save to a PNG, losslessly, and as compressed as possible without any loss of quality. Ideally in 96 DPI so they look good in Retina screens.
To then take the above generated PNG and also resize it in specific sizes, with height and width specified.
What am I missing with the convert command?
If you want to convert a TIF, GIF or JPEG to PNG, the command is:
convert image.tif result.png
or
convert image.jpg result.png
In answer to your questions...
Question 1
PNG is lossless by definition, so that is not an issue. To get better compression of a PNG, you generally need to reduce the colours, i.e.
convert image.jpg -colors 64 result.png # or try 255 which allows a palettised image
The dpi is pretty irrelevant until you print on paper. More pixels are needed if you want more quality on screen.
Question 2
If you want to resize an image without destroying its aspect ratio, use
convert image.jpg -resize 200x100 result.png # retain aspect ratio
If you don't care if that makes the image look stretched or distorted, and you want exactly 200x100, tell ImageMagick that you really mean it by shouting:
convert image.jpg -resize 200x100! result.png # ignore aspect ratio
i'm having a large jpg, which has a resolution of x * 256 / x * 256. I want to cut this image into 256x256 tiles with a naming convention {zoom}-{x}-{y}.jpg. In the past i've used ZoomifyExpress Converter which does the cutting and zooming. I also want 6 different zoom levels. I've started so far with this command:
convert example.jpg -crop 256x256 +gravity -set filename:tile
./tiles/%[fx:page.x/256]-%[fx:page.y/256] %[filename:tile].jpg
This produces a lot of x-y.jpg tiles.I don't know how i can add different zoomlevels. I'm relativly new to ImageMagick and this feels like a basic thing to do. Hopefully somebody can help me out. Thanks in advance.
I found the solution:
I just resize the image to the appropriate size and then crop it. The first number in the filename is the zoom level.
convert example.jpg -resize 256x256 -crop 256x256 -set filename:tile
./tiles/0-%[fx:page.x/256]-%[fx:page.y/256] %[filename:tile].jpg
convert example.jpg -resize 512x512 -crop 256x256 -set filename:tile
./tiles/1-%[fx:page.x/(256)]-%[fx:page.y/(256)] %[filename:tile].jpg
.. and so on until i reach the highest resolution.
I converted a 2.9M jpg to a 20x20 using 8 as the quality. but that file's size is still 48k.
here is my command
convert 238832c58dc3bc0b_29M.jpg -quality 8 -resize '20x20>' +repage 238832c58dc3bc0b_20x20.jpg
and after conveted, 238832c58dc3bc0b_20x20.jpg is 48k. I tried smalled size and quality, still 48k. it shouldn't be so big. it should be less than 10k. anybody know how to enhance it? thanks
Use -thumbnail instead of -resize or add -strip to your command.
Thumbnail removes the EXIF information apart from the color profile and strip removes the color profile as well.
What flag in magick.exe convert <flags> will reduce the dimensions of my image?
This is the command I'm using: magick.exe input.png[0] -depth 8 -type Grayscale -dresize 400x300.
The [0] after the source-image filename is meant to strip the first frame of any animated gifs.
How can I do reduce my output gif sizes? My file sizes are too large: my outputs need to be less than 100k. Any methods other than reducing the dimensions are also welcome.
convert test.gif -fuzz 10% -layers Optimize result.gif
Adding a -fuzz 2% produced a better optimization, but still not very good. At -fuzz 15% It isolated the differences for frame optimization to just the visible color band changes I noted before.
At 25% the differences were almost to just the text changes.
Finally at a massive 30% fuzz factor (ignore color changes below that figure, did it optimize to just the text changes.
You can try gifsicle:
gifsicle -O3 old.gif -o new.gif
If it's an animation, you could try skipping frames (see how it works).
magick.exe convert -resize 100x100 .\step1.jpg .\step2.jpg -delay 100 -loop 0 animation.gif
Thanks to Nate.
//IMPORTANT: -resize should come first.
//BY DEFAULT: the aspect ratio will be locked with the longest dimension being set to 100px.
//GENERALIZATION: this order `magick convert 1st<input_file(s)> 2nd<switch(es)> 3rd<output_file>`.
//IMPORTANT-RELATED: `-delay` will not work on second brush! Use `-set delay` for existing files.
Please, also be sure to refresh your folder view to ensure that you're not viewing old output files: Windows Explorer (F5).
Try to use the option:
-type Palette
It might help to reduce your gif file sizes smaller, oh and I believe -depth 8 can only be used for png images.