I have created a very sample SOA application with HTTP binding. The end point URL of my HTTP Binding is a sample netbeans application ( Calculator as a service ) . The service runs through glassfish server and is working fine.
I have created a simple BPEL synchrounous processs , which inputs 2 numbers ( defined using complex type schema ) and outputs response ( i.e sum of the 2 numbers ) . Whenver i have compiled the application i get the same fault
Warning(24,74): Failed to Find Binding "SesisonLocator":"{http://xmlns.oracle.com/pcbpel/adapter/http/Application3/http_session_locator2/SesisonLocator}GetSessionLocatorMethod_pt" in WSDL Manager
I dont know what WSDL changes have to be performed in order to get the application up and running.
PS: The calculator service is running is developer machine and BPEL application is to be deployed in other system.
Related
I need to find the WSDL of a proxy service that I have defined in the Oracle Service Bus.
Export WSDL option in the console gives me jar file which contains the .WSDL file but in a different format,
<WL5G3N0:definitions name="PollAddressFromDB-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/DBPoll_Adapter/PollAddressFromDB/PollAddressFromDB" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/DBPoll_Adapter/PollAddressFromDB/PollAddressFromDB" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
I want to run a test on my web service using Soap UI but Sap UI would not accept this WSDL format.
How and Where can I retrieve the actual WSDL file.
Thanks!
As SiKing mentioned, if it's a http proxy, just go to the endpoint URL and append ?wsdl to the end. SoapUI can create a project from that.
Please refer to my following answer How to access the WSDL URL of a OSB proxy service in web browser
Reproducing it here:
There are three ways to access an effective WSDL:
In a Web browser, enter the URL for an HTTP-based proxy service,
appended with ?WSDL. This works only for HTTP-transport-based services for which Oracle Service Bus can generate effective WSDLs.)
In a Web browser, enter the fixed HTTP URL, for example:
[http://host:port/sbresource?PROXY/project_path/proxy_service_name]
or
[http://host:port/sbresource?BIZ/project_path/business_service_name]
This works for all services for which Oracle Service Bus can generate effective WSDLs.
Export the WSDL from the console
I am trying to create a sample Delphi XE7 desktop app that will connect to SSRS 2005 web service but every time I try to call LoadReport web method, the following error is shown:
This is what I have done so far:
Create a desktop app.
Import WSDL for ReportExecution2005 and ReportService2005.
Create a button that call the web service based on the code shown
here. The web service locations as well as report are hardcoded for
simplicity purposes.
This is the code snippet from the link:
HTExec := tHttpRio.Create(nil);
rsExec := GetReportExecutionServiceSoap(False, ExecURL, HTExec);
// Load the selected report.
LRParams.Report := 'ReportName';
LoadParamsResponse := rsExec.LoadReport(LRParams); //here it fails
Note: I have already created a .NET win form app (VS2010 and VS2013) that consumes this web service without any issues, thus I know the web service and report to render are working OK. Sadly our requirements is for a Delphi solution, My educated guess is that the WSDL importer generated code is not correct and somebody out there may have come across with this issue before and know how to solve it.
I did a quick search for "http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices/LoadReport"
and found this.
If it applies to you as well, it may be the case you're calling the service on an incorrect URL, use the one with ReportExecution2005.asmxin it, not ReportService2005.asmx
(There's a lot more here)
To find out differences between the Delphi version and the working version, use a HTTP proxy (Fiddler2) to capture the SOAP HTTP traffic in both setups.
If you have no access to the working environment, use SoapUI to create SOAP requests.
I've setup a demo NSB Gateway pretty much based on the samples. all working fine when running from visual studio. msg send from SiteA being received on SiteB.
However after I host SiteB in my local Windows Service (NServiceBus.Host.exe /install), I've noticed that SiteB's url is no longer accessible (ie. http://localhost:25899/SiteB) hence msg sent from SiteA all went into error queue.
Help would be apprecaited!
I've got it sorted!
when installing on the server i just need to add "NServiceBus.Lite NServiceBus.MultiSite" to the command line.
and it's all working as intended.
We are using IBM Web Experience Factory 7.0.1 for our project. In one of the models we are connecting to a WSDL based service. For that we are using Web Service Multiple Operation Builder. I have enabled testing support for the builder. But when I am testing by launching the model and try to invoke any methods I get the follwing error:
An error has occurred. The error message returned was: "Error in
method sd_WSMultiOpServicesGetOrdersGotoOperation. Error in method
sd_WSMultiOpServicesGetOrders_ShowResults. Error in method
getOrdersExecute. Error in method getOrders.invoke. Error in method
getOrders.invokeInternal. (404)Not Found".
Both of the Web Experience Factory (WEF) Web Service builders have an advanced input (checkbox) to tell them to log the requests and responses they're making/getting back. Check that checkbox then save the model and run it again (redeploy if not auto-synching the project to the deployed WAR). Then when you run the action that hits the web service, it should log additional debugging info into the deployed WAR's WEB-INF/logs folder in debugTracing.txt. That should tell you what URL it's trying to hit with the web service that you're receiving the 404 error back from.
I hope that info helps,
..Mike Burati
The postings on this site are my own and do not necessarily represent the positions, strategies, or opinions of IBM.
I have an application named “LeafTest” which has Server Edition and Client Edition. The server Service is “Mss.exe” which is running under account “stepup” account which I checked from “services.msc” and system configuration is 2003 server 32bit standard edition with SP2. But yesterday means November 20 it suddenly stopped , I don’t know what is the reason behind it.
When I checked my application logs I can see these errors just before it reported service stopped
The entries in event log are
Following error also i can see somewhere
Event ID ( 8500 ) in Source ( LeafTest)
cannot be found. The local computer may not have the necessary registry
information or message DLL files to display messages from a remote computer.
When I go0gled somewhere its mentioning my application may not be installed properly or registered or I need to work with registry. Can any body tell me what will be the reason behind the service stpped by reading logs which i have posted
A service may halt if there is an unhandled exception. Check that you are handling all exceptions. Also, if the service uses any COM objects I have, in the past, had exceptions that could not be caught in my .NET 2.0 applications.