Everytime I try to deploy my rails app onto heroku it says
Michael$ heroku create
Creating stormy-window-812..... done, stack is bamboo-mri-1.9.2
http://stormy-window-812.heroku.com/ | git#heroku.com:stormy-window-812.git
Michael$ git push heroku master
! Invalid path.
! Syntax is: git#heroku.com:.git where is your app's name
fatal: The remote end hung up unexpectedly
I'm not sure what's wrong. I do a normal heroku create and my git is working for github to load code. Is there something I'm missing? The path seems to be the right format so I don't know that the problem is.
Your .git/config is borked.
Ensure that the remote for heroku points to:
git#heroku.com:stormy-window-812.git
There must be a bit of misstep somewhere in your process, I created a sample app, using the following commands - hopefully this will help you identify where things aren't going right.
Just the list of commands:
$ rails new sample_app
$ cd sample_app/
$ git init
$ git add .
$ git commit -m "Initial commit"
$ heroku create
$ git push heroku master
$ heroku open
And the commands, with some truncated output:
$ rails new sample_app
create
create README
create Rakefile
create config.ru
create .gitignore
# ..snip..
$ cd sample_app/
$ git init
Initialized empty Git repository in /sample_app/.git/
$ git add .
$ git commit -m "Initial commit"
[master (root-commit) 487a313] Initial commit
37 files changed, 1138 insertions(+), 0 deletions(-)
create mode 100644 .gitignore
create mode 100644 Gemfile
create mode 100644 Gemfile.lock
create mode 100644 README
# ..snip..
$ heroku create
$ git push heroku master
Counting objects: 63, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (47/47), done.
Writing objects: 100% (63/63), 24.81 KiB, done.
Total 63 (delta 2), reused 0 (delta 0)
-----> Heroku receiving push
-----> Ruby/Rails app detected
-----> Detected Rails is not set to serve static_assets
Installing rails3_serve_static_assets... done
-----> Configure Rails 3 to disable x-sendfile
Installing rails3_disable_x_sendfile... done
-----> Configure Rails to log to stdout
Installing rails_log_stdout... done
-----> Gemfile detected, running Bundler version 1.0.7
Unresolved dependencies detected; Installing...
Using --without development:test
Fetching source index for http://rubygems.org/
Installing rake (0.9.2)
Installing multi_json (1.0.3)
Installing activesupport (3.1.0.rc6)
# ..snip..
-----> Compiled slug size is 5.6MB
-----> Launching... done, v4
http://gentle-water-874.heroku.com deployed to Heroku
To git#heroku.com:gentle-water-874.git
* [new branch] master -> master
$ heroku open
I think you need to cd into your app directory. Then do the push again.
Also, make sure you add heroku as your remote then you can try again:
git remote add heroku git#heroku.com:appname.git
I had this problem after renaming my app. If you do
heroku rename newname
you will then have to do
git remote rm heroku
git remote add heroku git#heroku.com:newname.git
My .git/config was clearly dorked - I attempted changing to first_app as shown above (newby: RoR Tutorial chapter 1) several times. Deleting the /.git/config and doing the steps above starting with 'git init' fixed the config: url = git#heroku.com:dry-eyrie-8108.git
It also be as simple as:
$ heroku login
$ heroku git:clone -a appname ( this line right here solved it for me)
$ git add .
$ git commit -am "make it better"
$ git push heroku master
Not sure if anyone else has ran into this same misunderstanding. The error from heroku mentions the url to your app needs to meet this syntax, "https://git.heroku.com/my-app.git".
This did not work for me. However, the syntax, "my-app.herokuapp.com", resolved the error.
Related
I am trying to get into my rails heroku database. Usually I just run:
heroku run rails console
but it's giving me an error: bash: rails: command not found
I have no idea what caused this. Haven't updated my project code.
heroku --version
heroku-toolbelt/3.36.5 (x86_64-darwin15) ruby/2.2.4
heroku-cli/5.6.14-b0cc983 (darwin-amd64) go1.7.4
=== Installed Plugins
heroku-redis#1.2.8
The same happened to me. My problem was that I didn't commit my changes before the first push, so I didn't have the project up. I did:
git add .
git commit -m "first commit"
git push origin heroku
then, before trying rails c, you need to setup the database.
heroku run rake db:migrate
I followed this devcenter.heroku: getting started with rails4
I am trying to push some ruby code with git and keep getting stopped part way through. Here is my setup and error I get..
root#slacker:~/ruby# git remote -v
heroku https://git.heroku.com/warm-woodland-27175.git (fetch)
heroku https://git.heroku.com/warm-woodland-27175.git (push)
root#slacker:~/ruby# ls
config.ru myapp.rb
root#slacker:~/ruby# git push heroku master
Counting objects: 4, done.
Compressing objects: 100% (3/3), done.
Writing objects: 100% (4/4), 398 bytes | 0 bytes/s, done.
Total 4 (delta 0), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: ! No default language could be detected for this app.
remote: HINT: This occurs when Heroku cannot detect the buildpack to use for this application automatically.
remote: See https://devcenter.heroku.com/articles/buildpacks
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to warm-woodland-27175.
remote:
To https://git.heroku.com/warm-woodland-27175.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/warm-woodland- 27175.git'
root#slacker:~/ruby#
I am still trying to understand the ins and outs of git but I am pretty lost as to why git doesn't recognize the file extensions in my compilation folder. I thought that was how it fetched what language to use, .rb .pl etc... Any help would be much appreciated.
I had this error when trying to deploy my Sinatra app to Heroku.
heroku buildpacks:set heroku/ruby
I read https://devcenter.heroku.com/articles/buildpacks which helped me finish the solution.
But I started with https://devcenter.heroku.com/articles/rack
which helped me understand the files that you need to add such as the Gemfile etc. Make sure you do the bundle install.
Make sure you committed your changes after you added the Gemfile, etc. So
git add .
or whatever you need to do it then commit
git commit -m "Added files for Heroku deployment"
or change the message as you want. and then can you deploy using
git push heroku master
Now I have my site running using heroku
If I am missing something that you need, just ask in comments so I can clarify.
I had the same issue when I was trying to deploy to Heroku with Ruby Sinatra. The issue in my case was that I'm brand new to Ruby and Sinatra and didn't know anything about the gems and bundling.
I literally only had my app.rb file in the folder.
I took the following steps, based on some guides 1 I read:
If my app is called app.rb, create a file called config.ru:
require './hello'
run Sinatra::Application
Create a file called Gemfile:
source 'https://rubygems.org'
gem 'sinatra'
Then I found this article that reminded me that I need to run bundle install.
Then I add these files to my git, pushed it, and mine is working!
I haven't been able to get Heroku to update my app for some reason. This is the first app I've had problems with this happening. I've tried a couple different methods, but everything I've tried just says in the command "everything is up to date." and when I check heroku, it's just an early version of my app. Any idea why it won't update on Heroku?
Here is what I've tried:
$ bundle exec rake test
$ git add -A
$ git commit -m "..."
$ git checkout master
$ git merge blah
$ bundle exec rake test
$ git push
$ git push heroku
$ heroku run rake db:migrate
and I've also tried this as well:
$ git status
$ git add .
$ git commit -m "..."
$ git push heroku master
$ heroku run db:migrate
Heres the git status:
$ git status
On branch master
Your branch is up-to-date with 'origin/master'.
nothing to commit, working directory clean
Here's trying to force it
$ git push heroku master --force
Everything up-to-date
Here's with git remote -v
heroku https://git.heroku.com/stupidapp1.git (fetch)
heroku https://git.heroku.com/stupidapp1.git (push)
origin https://github.com/Tyrantt47/stupidapp1.git (fetch)
origin https://github.com/Tyrantt47/stupidapp1.git (push)
Curtis, I feel like this answer could be judged as the antithesis of a good dev, but if you have the code you want to deploy checked into version control and locally, why not just push it to a new Heroku app.
If the name of the repository is any indication of the scale of the application, I would say try it and see the results.
Heroku provides good documentation on migrating a database from one app to another and its add-on services are easy to get setup, if either one of those are a concern.
Food for thought...
I think that the syntax is
git push -f heroku master
I've setup a post-update hook for my project. I have a bare repository (/var/git/myproject) which I push to, and a live repository (/var/www/myproject) where my app is running. I also included bundle install and bundle exec rake db:migrate to install gems and update db.
Below is my post-update hook
#!/bin/bash
echo "Pulling changes into Live..."
cd /var/www/myproject || exit
unset GIT_DIR
git pull origin master
# check if ruby app
if [ -f /var/www/myproject/Gemfile ];
then
echo " Ruby app detected..."
bundle install --without development test
bundle exec rake db:migrate # migrate database
fi
exec git-update-server-info
When I push my changes though I get the following message (notice the "bundle command not found" error):
martyn#localhost:~/www/myproject$ git push -u origin master
martyn#192.168.0.100's password:
Counting objects: 832, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (783/783), done.
Writing objects: 100% (832/832), 487.70 KiB, done.
Total 832 (delta 434), reused 0 (delta 0)
remote: Pulling changes into Live...
remote: From /var/git/myproject
remote: * branch master -> FETCH_HEAD
remote: Ruby app detected...
remote: hooks/post-update: line 13: bundle: command not found
remote: hooks/post-update: line 14: bundle: command not found
To 192.168.24.100:/var/git/myproject.git
* [new branch] master -> master
Branch master set up to track remote branch master from origin.
Why is bundle not running? I cd to the live app directory in the script. When I'm in terminal myself and I cd to the live directory and run bundle install it works so bundle is there.
Your hook shell ins't the same than the one you logged in (and which has the proper PATH)
You can try using at the beginning your your hook script:
#!/bin/bash -l
(See this answer
The -l parameter executes the command in a login shell, which means that it inherits your path and other settings from your shell profile.
)
Or you can make sure your script gets the same environment than your current session, by adding in the first lines of your hook:
$ source $HOME/.bash_profile # single user RVM setup
$ source /etc/profile # multi user RVM setup
Or (final alternative) you can add (before calling bundle) (for a single-user rvm installation)
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"
My first time pushing to Heroku using Git and I'm getting the error message: Gemfile.lock is required. Please run "bundle install" locally and commit your Gemfile.lock.
I have ran bundle install, added the files to the git repo, commited the changes. See the Gemfile.lock in both the repository and my directory but when I run the command git push heroku master it consistently throws that error.
What am I doing wrong:
Here is the git repo on my PC
$git ls-files
.bundle/config
.gitignore
.rspec
Gemfile
Gemfile.lock
README
Rakefile
app/assets/images/rails.png
app/assets/javascripts/application.js
app/assets/stylesheets/application.css
..<snip>..
Here is the git status of the repo.
$git status
# On branch ch_ruby_intro
# Your branch is ahead of 'origin/ch_ruby_intro' by 6 commits.
#
nothing to commit (working directory clean)
Error when I try to deploy.
$git push heroku master
Counting objects: 239, done.
Compressing objects: 100% (140/140), done.
Writing objects: 100% (239/239), 50.30 KiB, done.
Total 239 (delta 74), reused 215 (delta 67)
-----> Heroku receiving push
-----> Ruby/Rails app detected
!
! Gemfile.lock is required. Please run "bundle install" locally
! and commit your Gemfile.lock.
!
! Heroku push rejected, failed to compile Ruby/rails app
Why is it not seeing the Gemfile.lock file?
Might it be that you're committing to the wrong branch? You're pushing master and committing to ch_ruby_intro.