After doing a bundle install, I run 'rails s' it runs into this error.
$ rails s
/Users/XXXX/.rvm/gems/ruby-1.8.7-p352#r3/gems/json-1.5.3/ext/json/ext/json/ext/parser.bundle: [BUG] Segmentation fault
ruby 1.8.7 (2011-06-30 patchlevel 352) [i686-darwin10.8.0]
Abort trap
Any help would be greatly appreciated
rvm gemset empty
rvm use ree#my-gemset
gem install bundler
bundle install
This solved the issue for me. Must be some extension got compiled against the wrong version of Ruby (in my case). Hope it works for you!
If you are not using RVM, I found this command to uninstall all gems:
'gem list | cut -d" " -f1 | xargs gem uninstall -aIx'
gem install bundler
bundle install
Also you might want to try using bundle exec rails s
Your gemset is not compiled for the version of ruby you are using. I found this worked for me:
rvm gemset empty
rvm gemset create your_gem_set_name
rvm use 1.8.7#your_gem_set_name --default
bundle install
The new version of Ruby 1.8.7 caused this issue. Had to downgrade back to one from the past.
Pull out the json gem and see if things work. If they don't then I'm lost. If they do work then you have to figure out why that gem won't work with your version of rails and your version of ruby.
If you look in Gemfile.lock you will see a "treeview" of gems, and the nested ones are ones that were pulled in by a dependency from the one they're nested under. See if you are using this json gem for something important or if it can go.
I had a very similar issue when I took my rails 3.0.9 and tried to deploy it on a host that only had 3.0.3 on it. It turned out that the json gem was for some 3.0.9 version of a rails gem...maybe ActiveSupport? I can't remember that part.
Can you tell us what version of rails you're using?
Related
I'm desperate, please help. I can't figure out how to change Ruby on Rails to run with 2.0.0, even though I think I've done everything to set 2.0.0 as the default, and rvm -list doesn't even show 1.8.7 as an option. I don't know what files I need to move/what pathways I need to change, and my attempts to uninstall rails have been unsuccessful as there's a "missingBundle" error.
$ ruby - v
returns ruby 2.0.0p247
$ rvm--default use 2.0.0
Using /Users/ericafischer-colbrie/.rvm/gems/ruby-2.0.0-p247
Then,
$ rails -s
Rails prefers to run ruby 2.0. You're running ruby 1.8.7 (2012-02-08 patchlevel 358)
[universal-darwin12.0]. Please upgrade to Ruby 1.9.3 or new to continue.
I've spent a lot of time looking at similar questions posted on stackoverflow and those solutions so far have not yielded any results.
Since you're using rvm, make sure you create a gemset and ruby-version file and install the version of rails you want to use.
E.g inside you're working dir tell rvm which ruby to use, which gemset to use, create both a gemset and ruby-version file:
rvm use ruby-2.0.0#my_cool_project --ruby-version --create
Then
gem install rails
To check run which ruby in that directory to make sure it's ruby 2 - - which rails will show you that it's using the gem of rails inside the ruby 2 my cool project gemset. Should be ok
Looks like you may have used something like sudo gem install rails.
When installing gems, you want to be sure to not use the sudo command.
Try sudo gem uninstall rails; rvm use ruby-2.0.0#myapp --create; gem install rails
Install rvm in your Macintosh
Then do rvm install 2.0.0 or rvm install version(whatever version you need)
Where ever you need a particular version of Ruby(say 2.0.0), do rvm use 2.0.0 and whichever version you need you can switch similarly.
If you are not sure how to install rvm or stuck with something else. Please see link for detailed explanation.
Updated, thanks #Momer.
I had already installed rails 1.8.7, forgot about it, then installed 1.9.3 through RVM. I was getting weird errors, so I purged my Mac of the system version of Ruby and started again using RVM. So far I've
Installed Ruby:
rvm reinstall 1.9.3-p0
which ruby
/Users/User/.rvm/rubies/ruby-1.9.3-p0/bin/ruby
Manually setup Rubygems
which gem
/Users/User/.rvm/rubies/ruby-1.9.3-p0/bin/gem
Tried to install rails
sudo gem install rails
Successfully installed rails-3.2.1
1 gem installed
gem list
rails (3.2.1, 3.2.0)
It says rails is installed, but which gem does not work, and when I try to use rails new I get:
-bash: rails: command not found
I'm definitely missing something here. The only explanation I can think of is that there are remnants of a previous ruby or rails install that's causing problems. Is there a way to start completely from scratch?
If you are using RVM, you should not use "sudo" when you install gems. That will install gems to your system ruby version (not on the RVM rubies).
First, set up default rvm ruby like
rvm use ruby-1.9.3-p0 --default
Then, install rails on it by running:
gem install rails -v=3.2.1
It's actually better to use gemsets so you can have different gems set for the same ruby version. Check here for more info.
I'm going through the rails by example tutorial.
Its seems that every time I close terminal rails defaults back to 2.3.5 & I have to go through the process of installing 3.0.3 every time I open the terminal?
I installed rails using: $ [sudo] gem install rails --version 3.0.3
Has anyone experienced a similar issue? I've tried googling around and searching stack to no avail.
The problem is almost-assuredly RVM interpreting 2.3.5 as your default rails version in your default gem set. I ran into this problem myself when first experimenting with RVM. Try this:
rvm --default use 1.9.2 (or whatever you want your default ruby interpreter to be)
rvm gemset create rails-3.0.3
rvm use 1.9.2#arails-3.0.3 --default
gem install rails
That will:
Set your default ruby interpreter to the desired ruby version
Create a gemset for your Rails 3.0.3 install and make it your default gemset
Install rails
Once you close the terminal and open it back up, it'll load RVM's defaults, putting you back on Rails 3.0.3 again.
Try uninstalling the rails gem:
gem uninstall rails
If you are prompted to select a version, select 2.3.5 and leave the 3.0.3 version intact.
P.S: Are you using RVM? If not, I would highly recommend it.
I've had this problem using RVM, if you're using RVM do: $rvm 1.9.2 (or whatever ruby version you installed the rails 3 gem with).
Check the output of $ ruby -v when you seem to have access to rails3 and again $ ruby -v when you can only seem to get to v2.3.5. If it shows different versions of ruby then you most likley are using RVM.
#Ads If youre using RVM and you install rails using sudo like so
$ [sudo] gem install rails --version 3.0.3
youre doing it wrong. RVM depends on you using a ruby distro that was installed by RVM into your user directory. If youre using sudo, youre installing rails gem into your system-wide ruby.
So check that youre using the right ruby version by doing 'rvm info' and then do your 'gem install rails --version 3.0.3' without sudo
I'm trying to setup clockingit but...
even after
gem install -v=2.3.8 rails
1 gem installed
i'm getting
rails -v
Rails 2.3.5
I need 2.3.8 to rake the gems for clockingit
help greatly apreciated
Try gem install -v 2.3.8 rails (no equal sign). You should also check if the version of Ruby on Rails installed through RubyGems is used at all. Maybe a version of Ruby on Rails installed through the package management of your operating system overlaps the version installed through RubyGems.
Try to use rvm. It is dead simple to deal with, and makes managing gems very easy. If you already on rvm, try to create another gemset
rvm gemset create new_gemset
and the try to install rails
I am running Ruby 1.9.1 & rails 2.3.8. Everything is installed fine as far as I can tell but when I run rake db:migrate I get this error:
Missing the Rails 2.3.8 gem. Please gem install -v=2.3.8 rails, update your RAILS_GEM_VERSION setting in config/environment.rb for the Rails version you do have installed, or comment out RAILS_GEM_VERSION to use the latest version installed.
So I wanted to make sure I had rails installed and ran from the command line rails -v & it says Rails 2.3.8. So I am not sure what gives here. Can anyone point me in the right direction? thank you very much.
Well, if you really have those versions installed and you get the error, something may be wrong.
But, you can do as the message recommends and comment out the setting in your config/environment.rb so it tries to use whatever version you have installed.
Did you install rails with a different package manager? If I install rails with "sudo apt-get install rails" then "rails -v" uses the rails binary in /bin (even if it's 2.3.5 or 2.0.2) because that is first in my path. If after that I install rails with "sudo gem install rails -v=2.3.8" typing "rails -v" still gives me the version of the /bin rails. I haven't verified, but I would guess this is the same issue if you're using macports. If you uninstall the package you installed with the non rubygems package manger and then reinstall rails with rubygems that may fix your issue.
Hope this helps.