How to get my IP address programmatically on iOS/macOS? - ios

I would like to obtain my iPad's IP address programmatically.
How can I query the networking subsystem to find out what my IPv4 (and IPv6) addresses are?
PS: Can I disable IPv6 somehow?

The following code finds all IPv4 and IPv6 addresses on an iOS or OSX device. The first getIPAddress method acts more or less as the older code in this answer: you can prefer either one or the other type address, and it always prefers WIFI over cellular (obviously you could change this).
More interestingly it can return a dictionary of all addresses found, skipping addresses for not up interfaces, or addresses associated with loopback. The previous code as well as other solutions on this topic will not properly decode IPv6 (inet_ntoa cannot deal with them). This was pointed out to me by Jens Alfke on an Apple forum - the proper function to use is inet_ntop (look at the man page, and or refer to this inet_ntop article also provided by Jens.
The dictionary keys have the form "interface" "/" "ipv4 or ipv6".
#include <ifaddrs.h>
#include <arpa/inet.h>
#include <net/if.h>
#define IOS_CELLULAR #"pdp_ip0"
#define IOS_WIFI #"en0"
//#define IOS_VPN #"utun0"
#define IP_ADDR_IPv4 #"ipv4"
#define IP_ADDR_IPv6 #"ipv6"
- (NSString *)getIPAddress:(BOOL)preferIPv4
{
NSArray *searchArray = preferIPv4 ?
#[ /*IOS_VPN #"/" IP_ADDR_IPv4, IOS_VPN #"/" IP_ADDR_IPv6,*/ IOS_WIFI #"/" IP_ADDR_IPv4, IOS_WIFI #"/" IP_ADDR_IPv6, IOS_CELLULAR #"/" IP_ADDR_IPv4, IOS_CELLULAR #"/" IP_ADDR_IPv6 ] :
#[ /*IOS_VPN #"/" IP_ADDR_IPv6, IOS_VPN #"/" IP_ADDR_IPv4,*/ IOS_WIFI #"/" IP_ADDR_IPv6, IOS_WIFI #"/" IP_ADDR_IPv4, IOS_CELLULAR #"/" IP_ADDR_IPv6, IOS_CELLULAR #"/" IP_ADDR_IPv4 ] ;
NSDictionary *addresses = [self getIPAddresses];
NSLog(#"addresses: %#", addresses);
__block NSString *address;
[searchArray enumerateObjectsUsingBlock:^(NSString *key, NSUInteger idx, BOOL *stop)
{
address = addresses[key];
if(address) *stop = YES;
} ];
return address ? address : #"0.0.0.0";
}
- (NSDictionary *)getIPAddresses
{
NSMutableDictionary *addresses = [NSMutableDictionary dictionaryWithCapacity:8];
// retrieve the current interfaces - returns 0 on success
struct ifaddrs *interfaces;
if(!getifaddrs(&interfaces)) {
// Loop through linked list of interfaces
struct ifaddrs *interface;
for(interface=interfaces; interface; interface=interface->ifa_next) {
if(!(interface->ifa_flags & IFF_UP) /* || (interface->ifa_flags & IFF_LOOPBACK) */ ) {
continue; // deeply nested code harder to read
}
const struct sockaddr_in *addr = (const struct sockaddr_in*)interface->ifa_addr;
char addrBuf[ MAX(INET_ADDRSTRLEN, INET6_ADDRSTRLEN) ];
if(addr && (addr->sin_family==AF_INET || addr->sin_family==AF_INET6)) {
NSString *name = [NSString stringWithUTF8String:interface->ifa_name];
NSString *type;
if(addr->sin_family == AF_INET) {
if(inet_ntop(AF_INET, &addr->sin_addr, addrBuf, INET_ADDRSTRLEN)) {
type = IP_ADDR_IPv4;
}
} else {
const struct sockaddr_in6 *addr6 = (const struct sockaddr_in6*)interface->ifa_addr;
if(inet_ntop(AF_INET6, &addr6->sin6_addr, addrBuf, INET6_ADDRSTRLEN)) {
type = IP_ADDR_IPv6;
}
}
if(type) {
NSString *key = [NSString stringWithFormat:#"%#/%#", name, type];
addresses[key] = [NSString stringWithUTF8String:addrBuf];
}
}
}
// Free memory
freeifaddrs(interfaces);
}
return [addresses count] ? addresses : nil;
}
EDIT1: Code updated on May 16, 2014 (bug pointed out by lhunath, see comments). Loopback addresses now returned, but its easy for you to uncomment the test to exclude them yourself.
EDIT2: (by some unknown person): Improved further March 13, 2015: In case the user uses a VPN (regardless over WiFi or Cellular), the previous code would have failed. Now, it works even with VPN connections. VPN connections are given precedence over WiFi and Cell because that's how the device handles it. This should even work for Macs as the VPN connection on a Mac is also using IF utun0 but not tested.
EDIT3: (9/8/2016) Given the problems experienced by #Qiulang (see comments) with the VPN code (which someone else added), I've commented it out. If anyone knows definitively how to specify a user VPN please chime in with a comment.

In your implementation file .m ,
#import <ifaddrs.h>
#import <arpa/inet.h>
// Get IP Address
- (NSString *)getIPAddress {
NSString *address = #"error";
struct ifaddrs *interfaces = NULL;
struct ifaddrs *temp_addr = NULL;
int success = 0;
// retrieve the current interfaces - returns 0 on success
success = getifaddrs(&interfaces);
if (success == 0) {
// Loop through linked list of interfaces
temp_addr = interfaces;
while(temp_addr != NULL) {
if(temp_addr->ifa_addr->sa_family == AF_INET) {
// Check if interface is en0 which is the wifi connection on the iPhone
if([[NSString stringWithUTF8String:temp_addr->ifa_name] isEqualToString:#"en0"]) {
// Get NSString from C String
address = [NSString stringWithUTF8String:inet_ntoa(((struct sockaddr_in *)temp_addr->ifa_addr)->sin_addr)];
}
}
temp_addr = temp_addr->ifa_next;
}
}
// Free memory
freeifaddrs(interfaces);
return address;
}

Many existing solutions only consider wireless interfaces, which won't work for wired connections via an Ethernet adapter (ie. no Wifi or 3G); see this more recent solution which considers IP addresses obtained through wired interfaces as well.
iPad: How to get IP address programmatically WIRED (not via wireless)

Get IP address using Swift 3:
func getIPAddress() -> String {
var address: String = "error"
var interfaces: ifaddrs? = nil
var temp_addr: ifaddrs? = nil
var success: Int = 0
// retrieve the current interfaces - returns 0 on success
success = getifaddrs(interfaces)
if success == 0 {
// Loop through linked list of interfaces
temp_addr = interfaces
while temp_addr != nil {
if temp_addr?.ifa_addr?.sa_family == AF_INET {
// Check if interface is en0 which is the wifi connection on the iPhone
if (String(utf8String: temp_addr?.ifa_name) == "en0") {
// Get NSString from C String
address = String(utf8String: inet_ntoa((temp_addr?.ifa_addr as? sockaddr_in)?.sin_addr))
}
}
temp_addr = temp_addr?.ifa_next
}
}
// Free memory
freeifaddrs(interfaces)
return address
}

#DavidH's answer works fine till I got this result from some 4G cellular network:
{
"lo0/ipv4" = "127.0.0.1";
"lo0/ipv6" = "fe80::1";
"pdp_ip0/ipv4" = "10.132.76.168";
"utun0/ipv6" = "fe80::72c3:e25e:da85:b730";
}
I am not using vpn so I have no idea why I had a utun0/ipv6.
--- Updated ---
I further debug this issue and found that I can get an fake vpn address even in other 4G networks (is this iOS bug??),
{
""awdl0/ipv6"" = ""fe80::c018:9fff:feb2:988"";
""en0/ipv6"" = ""fe80::181a:2e43:f91b:db2b"";
""lo0/ipv4"" = ""127.0.0.1"";
""lo0/ipv6"" = ""fe80::1"";
""pdp_ip0/ipv4"" = ""10.48.10.210"";
""utun0/ipv4"" = ""192.168.99.2"";
}
If I did use vpn I will get this:
{
"lo0/ipv4" = "127.0.0.1";
"lo0/ipv6" = "fe80::1";
"pdp_ip0/ipv4" = "10.49.187.23";
"utun0/ipv6" = "fe80::5748:5b5d:2bf0:658d";
"utun1/ipv4" = "192.168.99.2"; //the real one
}
So it is utun1 NOT utun0
Without figuring out why I will just have to drop vpn check :(
---- update ----
I raised a bug (28131847) to apple and replied with "Not all utun interfaces are for VPN. There are other OS features that use utun interfaces."
But when I asked how to get a valid vpn IP address then, their answer was rather disappointed, "You can go into Settings -> VPN and look at your VPN configuration to see if the VPN is active. In some cases you can see the assigned IP address there as well. We are now closing this bug report." :(
---- update 2016/11/04 ----
I hit the problem again and I need to further modify #DavidH's answer to fix it:
I was in 4G network and I got this address:
addresses: {
"awdl0/ipv6" = "fe80::98fd:e6ff:fea9:3afd";
"en0/ipv6" = "fe80::8dd:7d92:4159:170e";
"lo0/ipv4" = "127.0.0.1";
"lo0/ipv6" = "fe80::1";
"pdp_ip0/ipv4" = "10.37.212.102";
"utun0/ipv6" = "fe80::279c:ea56:a2ef:d128";
}
With his original answer I will get the wifi IP fe80::8dd:7d92:4159:170e, which was fake and connection failed.
So I modified the code to like,
[searchArray enumerateObjectsUsingBlock:^(NSString *key, NSUInteger idx, BOOL *stop)
{
if ((internetReach.isReachableViaWiFi && [key hasPrefix:IOS_WIFI]) ||
(internetReach.isReachableViaWWAN && [key hasPrefix:IOS_CELLULAR])) {
address = addresses[key];
if(address) *stop = YES;
}
} ];

The current solution doesn't return the en0 device on OS X, the following code uses the System Configuration Framework to get the interfaces then uses standard C functions to get the IP address.
#include <stdio.h>
#include <string.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <sys/ioctl.h>
#include <net/if.h>
#define IFT_ETHER 0x6
#include <SystemConfiguration/SCDynamicStore.h>
+(void)getInterfaces
{
SCDynamicStoreRef storeRef = SCDynamicStoreCreate(NULL, (CFStringRef)#"FindCurrentInterfaceIpMac", NULL, NULL);
CFPropertyListRef global = SCDynamicStoreCopyValue (storeRef,CFSTR("State:/Network/Interface"));
id primaryInterface = [(__bridge NSDictionary *)global valueForKey:#"Interfaces"];
for (NSString* item in primaryInterface)
{
if(get_iface_address([item UTF8String]))
{
NSString *ip = [NSString stringWithUTF8String:get_iface_address([item UTF8String])];
NSLog(#"interface: %# - %#",item,ip);
} else
NSLog(#"interface: %#",item);
}
}
static char * get_iface_address (char *interface)
{
int sock;
uint32_t ip;
struct ifreq ifr;
char *val;
if (!interface)
return NULL;
/* determine UDN according to MAC address */
sock = socket (AF_INET, SOCK_STREAM, 0);
if (sock < 0)
{
perror ("socket");
return NULL;
}
strcpy (ifr.ifr_name, interface);
ifr.ifr_addr.sa_family = AF_INET;
if (ioctl (sock, SIOCGIFADDR, &ifr) < 0)
{
perror ("ioctl");
close (sock);
return NULL;
}
val = (char *) malloc (16 * sizeof (char));
ip = ((struct sockaddr_in *) &ifr.ifr_addr)->sin_addr.s_addr;
ip = ntohl (ip);
sprintf (val, "%d.%d.%d.%d",
(ip >> 24) & 0xFF, (ip >> 16) & 0xFF, (ip >> 8) & 0xFF, ip & 0xFF);
close (sock);
return val;
}

This answer was inspired by #DavidH's answer. I fixed some issues, replaced inet_ntop with getnameinfo which allows a cleaner approach. Note that this yields a dictionary that maps an interface name to an array of IP addresses (an interface can have multiple IPv4 and IPv6's associated with it, technically). It does not distinguish between IPv4 and IPv6:
// Get all our interface addresses.
struct ifaddrs *ifAddresses;
if (getifaddrs( &ifAddresses ) != 0) {
NSLog( #"Couldn't get interface addresses: %d", errno );
return nil;
}
int error;
char host[MAX( INET_ADDRSTRLEN, INET6_ADDRSTRLEN )];
_ipAddressesByInterface = [NSMutableDictionary dictionaryWithCapacity:8];
for (struct ifaddrs *ifAddress = ifAddresses; ifAddress; ifAddress = ifAddress->ifa_next) {
if (!(ifAddress->ifa_flags & IFF_UP) || (ifAddress->ifa_flags & IFF_LOOPBACK))
// Ignore interfaces that aren't up and loopback interfaces.
continue;
if (ifAddress->ifa_addr->sa_family != AF_INET && ifAddress->ifa_addr->sa_family != AF_INET6)
// Ignore non-internet addresses.
continue;
if ((error = getnameinfo( ifAddress->ifa_addr, ifAddress->ifa_addr->sa_len, host, sizeof( host ), NULL, 0, NI_NUMERICHOST )) != noErr) {
// Couldn't to format host name for this address.
NSLog( #"Couldn't resolve host name for address: %s", gai_strerror( error ) );
continue;
}
NSString *ifName = [NSString stringWithCString:ifAddress->ifa_name encoding: NSUTF8StringEncoding];
NSMutableArray *ifIpAddresses = _ipAddressesByInterface[ifName];
if (!ifIpAddresses)
ifIpAddresses = _ipAddressesByInterface[ifName] = [NSMutableArray arrayWithCapacity:2];
[ifIpAddresses addObject:[NSString stringWithCString:host encoding: NSUTF8StringEncoding]];
}
freeifaddrs( ifAddresses );
return _ipAddressesByInterface;

Great solution for swift in This file which serves all the details.
In One of my app I need to fetch wifi IP address. I have used answers above, in swift 3 like this:
let WIFI_IF = "en0"
let UNKNOWN_IP_ADDRESS = ""
var addresses: [AnyHashable: Any] = ["wireless": UNKNOWN_IP_ADDRESS, "wired": UNKNOWN_IP_ADDRESS, "cell": UNKNOWN_IP_ADDRESS]
var interfaces: UnsafeMutablePointer<ifaddrs>? = nil
var temp_addr: UnsafeMutablePointer<ifaddrs>? = nil
var success: Int = 0
success = Int(getifaddrs(&interfaces))
if success == 0 {
temp_addr = interfaces
while temp_addr != nil {
if temp_addr?.pointee.ifa_addr == nil {
continue
}
if temp_addr?.pointee.ifa_addr.pointee.sa_family == UInt8(AF_INET) {
if (String(utf8String: (temp_addr?.pointee.ifa_name)!) == WIFI_IF) {
addresses["wireless"] = String(utf8String: inet_ntoa(((temp_addr?.pointee.ifa_addr as? sockaddr_in)?.sin_addr)!))
}
}
temp_addr = temp_addr?.pointee.ifa_next
}
}
In this code, It crashes because I have to check for nil in each statement I have used as optional with ?. So it is better for me to use given linked file in my class. It becomes easy for me to check now like:
class func getWifiIPAddress() -> String {
var wifiIp = ""
let WIFI_IF = "en0"
let allInterface = Interface.allInterfaces()
for interf in allInterface {
if interf.name == WIFI_IF {
if let address = interf.address {
if address.contains(".") {
wifiIp = address
break
}
}
}
}
return wifiIp
}
I have parsed string for "." because Interface Class returns two interface in my iPhone for en0 address like "fb00::" and address like "101.10.1.1"

I created a simple file for getting the ip address. I based this solution on # lundhjem's, #DavidH's and #Ihunath's answers. It considers wired connections. I haven't included VPN in this solution though.
PCNetwork.h
#import <Foundation/Foundation.h>
NS_ASSUME_NONNULL_BEGIN
#interface PCNetwork : NSObject
+ (NSString *)getIPAddress; // Prefers IPv4
+ (NSString *)getIPAddress:(BOOL)preferIPv4;
+ (NSDictionary *)getIPAddresses;
#end
NS_ASSUME_NONNULL_END
PCNetwork.m
#import "PCNetwork.h"
#include <ifaddrs.h>
#include <arpa/inet.h>
#include <net/if.h>
#define IP_UNKNOWN #"0.0.0.0"
#define IP_ADDR_IPv4 #"ipv4"
#define IP_ADDR_IPv6 #"ipv6"
#implementation PCNetwork
#pragma mark - IP
+ (NSString *)getIPAddress {
return [self getIPAddress:YES];
}
+ (NSString *)getIPAddress:(BOOL)preferIPv4 {
NSArray *searchArray = [self getAllIFSearchArray:preferIPv4];
NSDictionary *addresses = [self getIPAddresses];
DLog(#"addresses: %#", addresses);
__block NSString *address = nil;
[searchArray enumerateObjectsUsingBlock:^(NSString *key, NSUInteger idx, BOOL *stop) {
address = addresses[key];
if(address) *stop = YES;
}];
return address ?: IP_UNKNOWN;
}
+ (NSDictionary *)getIPAddresses {
NSMutableDictionary *addresses = [NSMutableDictionary dictionary];
struct ifaddrs *interfaces;
BOOL success = !getifaddrs(&interfaces); // Retrieve the current interfaces : returns 0 on success
if (success) {
struct ifaddrs *temp_interface;
for (temp_interface = interfaces; temp_interface; temp_interface = temp_interface->ifa_next) { // Loop through linked list of interfaces
if (!(temp_interface->ifa_flags & IFF_UP) || (temp_interface->ifa_flags & IFF_LOOPBACK)) { // Ignore interfaces that aren't up and loopback interfaces.
continue;
}
if (!temp_interface->ifa_addr) {
continue;
}
const struct sockaddr_in *temp_addr = (const struct sockaddr_in*)temp_interface->ifa_addr;
if (temp_addr->sin_family == AF_INET || temp_addr->sin_family == AF_INET6) {
char addrBuf[MAX(INET_ADDRSTRLEN, INET6_ADDRSTRLEN)];
NSString *name = [NSString stringWithUTF8String:temp_interface->ifa_name];
NSString *type = nil;
if (temp_addr->sin_family == AF_INET) {
if (inet_ntop(AF_INET, &temp_addr->sin_addr, addrBuf, INET_ADDRSTRLEN)) {
type = IP_ADDR_IPv4;
}
} else {
const struct sockaddr_in6 *addr6 = (const struct sockaddr_in6*)temp_interface->ifa_addr; // AF_INET6
if (inet_ntop(AF_INET6, &addr6->sin6_addr, addrBuf, INET6_ADDRSTRLEN)) {
type = IP_ADDR_IPv6;
}
}
if (type) {
NSString *key = [NSString stringWithFormat:#"%#/%#", name, type];
addresses[key] = [NSString stringWithUTF8String:addrBuf];
}
}
}
freeifaddrs(interfaces); // Free memory
}
return addresses.count ? addresses.copy : nil;
}
#pragma mark - Inter Frame Spacing
+ (NSArray *)getAllIFSearchArray:(BOOL)preferIPv4 {
NSArray *KNOWN_WIFI_IFS = #[#"en0"];
NSArray *KNOWN_WIRED_IFS = #[#"en1",#"en2",#"en3",#"en4"];
NSArray *KNOWN_CELL_IFS = #[#"pdp_ip0",#"pdp_ip1",#"pdp_ip2",#"pdp_ip3"];
NSMutableArray *searchArray = [NSMutableArray array];
// Add wifi
[searchArray addObjectsFromArray:[self getIFSearchArrayWith:KNOWN_WIFI_IFS preferIPv4:preferIPv4]];
// Add cell
[searchArray addObjectsFromArray:[self getIFSearchArrayWith:KNOWN_CELL_IFS preferIPv4:preferIPv4]];
// Add wired
[searchArray addObjectsFromArray:[self getIFSearchArrayWith:KNOWN_WIRED_IFS preferIPv4:preferIPv4]];
return searchArray.copy;
}
+ (NSArray *)getIFSearchArrayWith:(NSArray *)iFList preferIPv4:(BOOL)preferIPv4 {
NSMutableArray *searchArray = [NSMutableArray array];
for (NSString *iFType in iFList) {
if (preferIPv4) {
[searchArray addObject:[NSString stringWithFormat:#"%#/%#", iFType, IP_ADDR_IPv4]];
[searchArray addObject:[NSString stringWithFormat:#"%#/%#", iFType, IP_ADDR_IPv6]];
} else {
[searchArray addObject:[NSString stringWithFormat:#"%#/%#", iFType, IP_ADDR_IPv6]];
[searchArray addObject:[NSString stringWithFormat:#"%#/%#", iFType, IP_ADDR_IPv4]];
}
}
return searchArray.copy;
}
#end

in iOS 13.4.1 is not work for me .
i use this fix it.
+ (NSString *)getIPAddress{
NSArray *searchArray =
#[ IOS_VPN #"/" IP_ADDR_IPv4, IOS_VPN #"/" IP_ADDR_IPv6, IOS_WIFI #"/" IP_ADDR_IPv4, IOS_WIFI #"/" IP_ADDR_IPv6, IOS_4_3G #"/" IP_ADDR_IPv4, IOS_4_3G #"/" IP_ADDR_IPv6, IOS_CELLULAR #"/" IP_ADDR_IPv4, IOS_CELLULAR #"/" IP_ADDR_IPv6];
__block NSDictionary *addresses = [self getIPAddressArray];
__block NSString *address;
[searchArray enumerateObjectsUsingBlock:^(NSString *key, NSUInteger idx, BOOL *stop)
{
address = addresses[key];
if ([key rangeOfString:#"ipv6"].length > 0 && ![[NSString stringWithFormat:#"%#",addresses[key]] hasPrefix:#"(null)"] ) {
if ( ![addresses[key] hasPrefix:#"fe80"]) {
// isIpv6 = YES;
*stop = YES;
}
}else{
if([self isValidatIP:address]) {
*stop = YES;
}
}
} ];
return address ? address : #"error";
}
+ (NSString *)getIPType{
NSString *ipAddress = [self getIPAddress];
if ([self isValidatIP:ipAddress]) {
return #"04";//ipv4
}else{
return #"06";//ipv6
}
}
+ (NSDictionary *)getIPAddressArray{
NSMutableDictionary *addresses = [NSMutableDictionary dictionaryWithCapacity:8];
// retrieve the current interfaces - returns 0 on success
struct ifaddrs *interfaces;
if(!getifaddrs(&interfaces)) {
// Loop through linked list of interfaces
struct ifaddrs *interface;
for(interface=interfaces; interface; interface=interface->ifa_next) {
if(!(interface->ifa_flags & IFF_UP) /* || (interface->ifa_flags & IFF_LOOPBACK) */ ) {
continue; // deeply nested code harder to read
}
const struct sockaddr_in *addr = (const struct sockaddr_in*)interface->ifa_addr;
char addrBuf[ MAX(INET_ADDRSTRLEN, INET6_ADDRSTRLEN) ];
if(addr && (addr->sin_family==AF_INET || addr->sin_family==AF_INET6)) {
NSString *name = [NSString stringWithUTF8String:interface->ifa_name];
NSString *type;
if(addr->sin_family == AF_INET) {
if(inet_ntop(AF_INET, &addr->sin_addr, addrBuf, INET_ADDRSTRLEN)) {
type = IP_ADDR_IPv4;
}
} else {
const struct sockaddr_in6 *addr6 = (const struct sockaddr_in6*)interface->ifa_addr;
if(inet_ntop(AF_INET6, &addr6->sin6_addr, addrBuf, INET6_ADDRSTRLEN)) {
type = IP_ADDR_IPv6;
}
}
if(type) {
NSString *key = [NSString stringWithFormat:#"%#/%#", name, type];
addresses[key] = [NSString stringWithUTF8String:addrBuf];
}
}
}
// Free memory
freeifaddrs(interfaces);
}
return [addresses count] ? addresses : nil;
}
+ (BOOL)isValidatIP:(NSString *)ipAddress {
if (ipAddress.length == 0) {
return NO;
}
NSString *urlRegEx = #"^([01]?\\d\\d?|2[0-4]\\d|25[0-5])\\."
"([01]?\\d\\d?|2[0-4]\\d|25[0-5])\\."
"([01]?\\d\\d?|2[0-4]\\d|25[0-5])\\."
"([01]?\\d\\d?|2[0-4]\\d|25[0-5])$";
NSError *error;
NSRegularExpression *regex = [NSRegularExpression regularExpressionWithPattern:urlRegEx options:0 error:&error];
if (regex != nil) {
NSTextCheckingResult *firstMatch=[regex firstMatchInString:ipAddress options:0 range:NSMakeRange(0, [ipAddress length])];
if (firstMatch) {
NSRange resultRange = [firstMatch rangeAtIndex:0];
NSString *result=[ipAddress substringWithRange:resultRange];
//输出结果
NSLog(#"%#",result);
return YES;
}
}
return NO;
}

Related

iOS Hotspot find connected ip adresses [duplicate]

as the title, I want to get the detail of my personal hotspot, such as the ip address, the device which connect to my hotspot. what's more, the information I communicate with other devices by my personal hotspot?
Hope for some tips! thanks!
Look around a little. As suggested in this SO question:
Try this:
- (NSString *)getIPAddress
{
struct ifaddrs *interfaces = NULL;
struct ifaddrs *temp_addr = NULL;
NSString *wifiAddress = nil;
NSString *cellAddress = nil;
// retrieve the current interfaces - returns 0 on success
if(!getifaddrs(&interfaces)) {
// Loop through linked list of interfaces
temp_addr = interfaces;
while(temp_addr != NULL) {
sa_family_t sa_type = temp_addr->ifa_addr->sa_family;
if(sa_type == AF_INET || sa_type == AF_INET6) {
NSString *name = [NSString stringWithUTF8String:temp_addr->ifa_name];
NSString *addr = [NSString stringWithUTF8String:inet_ntoa(((struct sockaddr_in *)temp_addr->ifa_addr)->sin_addr)]; // pdp_ip0
NSLog(#"NAME: \"%#\" addr: %#", name, addr); // see for yourself
if([name isEqualToString:#"en0"]) {
// Interface is the wifi connection on the iPhone
wifiAddress = addr;
} else
if([name isEqualToString:#"pdp_ip0"]) {
// Interface is the cell connection on the iPhone
cellAddress = addr;
}
}
temp_addr = temp_addr->ifa_next;
}
// Free memory
freeifaddrs(interfaces);
}
NSString *addr = wifiAddress ? wifiAddress : cellAddress;
return addr ? addr : #"0.0.0.0";
}

cfhoststartinforesolution fails. get device name from IP address on LAN

As a part of assignment I have to scan my LAN and get the names of devices connected to wifi. I went through apples documentation this and many other S.O links like this. However resolution is not happening, some error occurs. I am not a networking guy and hence most of it sounded greek to me. an almost same question has been asked here
This is my code. I have written down the error that is occurring in comments.
An alternate answer would be helpful too.
+ (NSArray *)hostnamesForAddress:(NSString *)address {
// Get the host reference for the given address.
CFStreamError streamError;
struct addrinfo hints;
struct addrinfo *result = NULL;
memset(&hints, 0, sizeof(hints));
hints.ai_flags = AI_NUMERICHOST;
hints.ai_family = PF_UNSPEC;
hints.ai_socktype = SOCK_STREAM;
hints.ai_protocol = 0;
int errorStatus = getaddrinfo([address cStringUsingEncoding:NSASCIIStringEncoding], NULL, &hints, &result);
if (errorStatus != 0) return nil;
CFDataRef addressRef = CFDataCreate(NULL, (UInt8 *)result->ai_addr, result->ai_addrlen);
if (addressRef == nil) return nil;
freeaddrinfo(result);
CFHostRef hostRef = CFHostCreateWithAddress(kCFAllocatorDefault, addressRef);
if (hostRef == nil) return nil;
CFRelease(addressRef);
BOOL isSuccess = CFHostStartInfoResolution(hostRef, kCFHostNames, &streamError);
// always false
if (!isSuccess){
NSLog(#"error:%#",[self convertCFStreamErrorIntoNSError:streamError]);
// error:Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)" UserInfo=0x1cd29190 {kCFGetAddrInfoFailureKey=8}
return nil;
}
// Get the hostnames for the host reference.
CFArrayRef hostnamesRef = CFHostGetNames(hostRef, NULL);
NSMutableArray *hostnames = [NSMutableArray array];
for (int currentIndex = 0; currentIndex < [(__bridge NSArray *)hostnamesRef count]; currentIndex++) {
[hostnames addObject:[(__bridge NSArray *)hostnamesRef objectAtIndex:currentIndex]];
}
return hostnames[0];
}

NSString containsString crashes

I'm trying to filter an array according to one of it's string fields.
Both nameLower and filterLower has NSString value inside, and yet i keep getting:
__NSCFString containsString:]: unrecognized selector sent to instance 0x7f876b79e160
-(void) filterFriendsArray:(NSString*)filter {
[_filteredFriendsArray removeAllObjects];
for (FacebookUser* user in _friendsArray)
{
NSString* nameLower = [user.user.name lowercaseString];
NSString* filterLower = [filter lowercaseString];
if ([nameLower containsString:filterLower])
[_filteredFriendsArray addObject:user];
}
_displayedFriendsArray = _filteredFriendsArray;
}
If you want your code to work on iOS 7 as well as iOS 8 you should use one of the rangeOfString calls instead. Basically if the range returned has a length of zero, the substring is not there.
/* These methods return length==0 if the target string is not found. So, to check for containment: ([str rangeOfString:#"target"].length > 0). Note that the length of the range returned by these methods might be different than the length of the target string, due composed characters and such.
*/
- (NSRange)rangeOfString:(NSString *)aString;
- (NSRange)rangeOfString:(NSString *)aString options:(NSStringCompareOptions)mask;
- (NSRange)rangeOfString:(NSString *)aString options:(NSStringCompareOptions)mask range:(NSRange)searchRange;
- (NSRange)rangeOfString:(NSString *)aString options:(NSStringCompareOptions)mask range:(NSRange)searchRange locale:(NSLocale *)locale NS_AVAILABLE(10_5, 2_0);
Obviously it's trivial to implement containsString yourself in a category using rangeOfString:
#implementation NSString (Contains)
- (BOOL)myContainsString:(NSString*)other {
NSRange range = [self rangeOfString:other];
return range.length != 0;
}
#end
compare rangeOfString with NSNotFound
NSRange range = [self rangeOfString:other];
if(range.location != NSNotFound){
//do something
}
Use following:
if (![[NSString class] respondsToSelector:#selector(containsString)])
{
//ios 7
NSRange range = [mystring rangeOfString:other];
if(range.location != NSNotFound){
//do something
}
}
else //for iOS 8
{
if ([mystring containsString: other])
{
//do something
}
}
For those who encountered this in XLForm, make sure when you install XLForm using pods
platform :ios, '7'
pod 'XLForm'
It is already fixed in 3.1
from
if ([cellClassString contains:#"/"]) {
}
to
if ([cellClassString rangeOfString:#"/"].location != NSNotFound) {
}
I encapsulate my solution in YJKit, and you can call -[NSString containsString:] even for old version which below iOS 8.
bool _yj_streq(const char *str1, const char *str2, size_t length) {
for (int i = 0; i < length; i++) {
if (*str1++ != *str2++) {
return false;
}
}
return true;
}
- (BOOL)yj_containsString:(NSString *)string {
NSAssert(string != nil, #"*** -[%# containsString:] can not use nil argument.", [self class]);
size_t len1 = (size_t)self.length;
size_t len2 = (size_t)string.length;
if (len1 == 0 || len2 == 0 || len1 < len2) {
return NO;
}
const char *str1 = self.UTF8String;
const char *str2 = string.UTF8String;
for (size_t i = 0; i <= len1 - len2; i++) {
const char *substr1 = str1 + i;
if (_yj_streq(substr1, str2, len2)) {
return YES;
} else {
continue;
}
}
return NO;
}
Here is my source code:
https://github.com/huang-kun/YJKit/blob/master/YJKit/Base/Foundation/Categories/Generics/NSString%2BYJCompatible.m
Swift version of the answer given by w0mbat:
extension NSString {
func compatibleContainsString(string: NSString) -> Bool{
let range = self.rangeOfString(string as String)
return range.length != 0
}
}

Is there api for get infor about network usage of an app?

i want to create an app that show all app installed on the device and info about network usage of that app. Is there api for get infor about network usage?
Your own app can find out how much data the device as a how as used by using the code below, but there's no way of knowing how much each particular app has used. Apps like My Data Manager used to give you a breakdown per app but a) that wasn't totally accurate and b) it now longer does this now with iOS 7. There's another app that sends the data through VPN to its server and in the screenshots on the app store makes it look like it can give a breakdown per app, but that's spin but in reality it just can't except for a few and with some interaction from the user. Basically there is no guaranteed accurate way of doing it per every app.
Also there is no guaranteed accurate way of knowing all installed apps. There are some mechanisms to do a good guess of what is installed based against a database but no way of knowing definitely what is installed
#include <arpa/inet.h>
#include <net/if.h>
#include <ifaddrs.h>
#include <net/if_dl.h>
- (void) getDataUsage
{
NSTimeInterval elapsedTime = [[NSDate date] timeIntervalSinceDate: self.timeThatDataMonitoringStarted];
NSLog(#"********* GETTING DATA USAGE. Elapsed time: %f **************",elapsedTime);
NSArray *data = [self getDataCounters];
NSNumber *wifiSentSinceBoot = (NSNumber*)data[0];
NSNumber *wifiReceivedSinceBoot = (NSNumber*)data[1];
NSNumber *wwanSentSinceBoot = (NSNumber*)data[2];
NSNumber *wwanReceivedSinceBoot = (NSNumber*)data[3];
int wifiSentSinceBootAsInt = [wifiSentSinceBoot intValue];
int wifiReceivedSinceBootAsInt = [wifiReceivedSinceBoot intValue];
int wWanSentSinceBootAsInt = [wwanSentSinceBoot intValue];
int wWanReceivedSinceBootAsInt = [wwanReceivedSinceBoot intValue];
static int initialWifiSent;
static int initialWifiReceived;
static int initialWWanSent;
static int initialWWanReceived;
if (!self.initialDataValuesSet)
{
self.initialDataValuesSet = YES;
initialWifiSent = wifiSentSinceBootAsInt;
initialWifiReceived = wifiReceivedSinceBootAsInt;
initialWWanSent = wWanSentSinceBootAsInt;
initialWWanReceived = wWanReceivedSinceBootAsInt;
}
int wifiSentSinceLastRetrieval = wifiSentSinceBootAsInt - initialWifiSent;
int wifiReceivedSinceLastRetrieval = wifiReceivedSinceBootAsInt - initialWifiReceived;
int wWanSentSinceLastRetrieval = wWanSentSinceBootAsInt - initialWWanSent;
int wWanReceivedSinceLastRetrieval = wWanReceivedSinceBootAsInt - initialWWanReceived;
uint dataUsed = wifiSentSinceLastRetrieval + wifiReceivedSinceLastRetrieval + wWanSentSinceLastRetrieval + wWanReceivedSinceLastRetrieval;
NSLog(#"Total data: %d", dataUsed);
}
- (NSArray *) getDataCounters
{
BOOL success;
struct ifaddrs *addrs;
const struct ifaddrs *cursor;
const struct if_data *networkStatisc;
int WiFiSent = 0;
int WiFiReceived = 0;
int WWANSent = 0;
int WWANReceived = 0;
NSString *name=[[NSString alloc]init];
success = getifaddrs(&addrs) == 0;
if (success)
{
cursor = addrs;
while (cursor != NULL)
{
name=[NSString stringWithFormat:#"%s",cursor->ifa_name];
// NSLog(#"ifa_name %s == %#\n", cursor->ifa_name,name);
// names of interfaces: en0 is WiFi ,pdp_ip0 is WWAN
if (cursor->ifa_addr->sa_family == AF_LINK)
{
if ([name hasPrefix:#"en"])
{
networkStatisc = (const struct if_data *) cursor->ifa_data;
WiFiSent+=networkStatisc->ifi_obytes;
WiFiReceived+=networkStatisc->ifi_ibytes;
// NSLog(#"WiFiSent %d ==%d",WiFiSent,networkStatisc->ifi_obytes);
// NSLog(#"WiFiReceived %d ==%d",WiFiReceived,networkStatisc->ifi_ibytes);
}
if ([name hasPrefix:#"pdp_ip"])
{
networkStatisc = (const struct if_data *) cursor->ifa_data;
WWANSent+=networkStatisc->ifi_obytes;
WWANReceived+=networkStatisc->ifi_ibytes;
// NSLog(#"WWANSent %d ==%d",WWANSent,networkStatisc->ifi_obytes);
// NSLog(#"WWANReceived %d ==%d",WWANReceived,networkStatisc->ifi_ibytes);
}
}
cursor = cursor->ifa_next;
}
freeifaddrs(addrs);
}
return [NSArray arrayWithObjects:[NSNumber numberWithInt:WiFiSent], [NSNumber numberWithInt:WiFiReceived],[NSNumber numberWithInt:WWANSent],[NSNumber numberWithInt:WWANReceived], nil];
}

how to get the ipaddress of an iphone device in universal application in ios

I need to get the ipaddress of an iphone/ipad device,
I used the following code
- (NSString *)getIPAddress
{
struct ifaddrs *interfaces = NULL;
struct ifaddrs *temp_addr = NULL;
NSString *wifiAddress = nil;
NSString *cellAddress = nil;
// retrieve the current interfaces - returns 0 on success
if(!getifaddrs(&interfaces)) {
// Loop through linked list of interfaces
temp_addr = interfaces;
while(temp_addr != NULL) {
sa_family_t sa_type = temp_addr->ifa_addr->sa_family;
if(sa_type == AF_INET || sa_type == AF_INET6)
{
name = [[NSString stringWithUTF8String:temp_addr->ifa_name] retain];
addr = [[NSString stringWithUTF8String:inet_ntoa(((struct sockaddr_in *)temp_addr->ifa_addr)->sin_addr)] retain]; // pdp_ip0
if([name isEqualToString:#"en0"])
{
// Interface is the wifi connection on the iPhone
wifiAddress = addr;
NSLog(#"address addr %#",addr);
}
else if([name isEqualToString:#"pdp_ip0"])
{
// Interface is the cell connection on the iPhone
cellAddress = addr;
NSLog(#"address addr %#",addr);
}
}
temp_addr = temp_addr->ifa_next;
}
// Free memory
freeifaddrs(interfaces);
}
addr = wifiAddress ? wifiAddress : cellAddress;
NSLog(#"address addr %#",addr);
return addr ? addr : #"0.0.0.0";
}
It works fine when an application is not universal application.
When i changed the application to universal application it is returning null value as responce
please help me,
Thanks in advance

Resources