I installed wamp server and it works fine as the icon color is green and even the localhost works fine, but the problem happens when I add any PHP file inside www folder and try to access the file it gives me this message:
404 error The requested URL was not found on this server.
Any help will be appreciated.
How to run PHP project or files on wamp server at localhost?
Run wamp server
Create PHP project or file inside C://wamp/www/ directory.
Run your project or file means open URL in Browser ex: http://localhost/file_name.php or folder name
If a folder has an index.php file it will run by calling folder name in URL.
Running your project or file; means opening the URL in a browser
Example:
http://localhost/file_name.php or folder name
You should check the httpd-vhosts.conf file via /wamp64/bin/apache/apache2.4.41/conf/extra/httpd-vhosts.conf. the follwings; the port numbers here for example 83 cause it was my choice:
# Virtual Hosts
#
<VirtualHost *:83>
ServerName localhost
ServerAlias localhost
DocumentRoot "${INSTALL_DIR}/www"
<Directory "${INSTALL_DIR}/www/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
#
<VirtualHost *:83>
ServerName myProject
DocumentRoot "d:/wamp64/www/spip-projet-v"
<Directory "d:/wamp64/www/spip-projet-v/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
I have installed the Skeleton Application manually. My application is kept in "D:\xampp\htdocs\zf2". I've created a virtual host in the following way, in httpd-vhosts.conf
NameVirtualHost *:80
<VirtualHost *:80>
DocumentRoot "D:\xampp\htdocs"
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
ServerName zf2
DocumentRoot "D:/xampp/htdocs/zf2/public/index.php"
<Directory "D:/xampp/htdocs/zf2/public/index.php">
#DirectoryIndex index.php
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
but it does not shown properly and it gives the output
and the remain ing application with module and database shows also not shows in the proper way
but if i slightly modify in virtual host settings of
DocumentRoot "D:/xampp/htdocs/zf2/public/index.php"
to
DocumentRoot "D:/xampp/htdocs/zf2/public"
then, skeleton application shows fine but when i configure module and database it gives error "The server encountered an internal error and was unable to complete your request. Either the server is overloaded or there was an error in a CGI script. zend sleleton application error"
can any one help me i have waste lot of time to set it but didn't.
You need to set document root to the folder not a file. The page looks messed up when pointing to index.php as documentroot because it cannot find the stylesheets.
The issue with configuring the module/database is probably a different issue, and you would have to post your module/database configuration to get help there.
On a Windows machine, there's a system running on the local wampserver, but while the application is running on localhost, the URL says otherwise.
While I would expect the URL to be like this based on the directory structure:
http://localhost/pro/include/db_report.php
The developer has managed to do this:
http://ap-mispro/pro/include/db_report.php
So instead of localhost, the URL says ap-mispro.
And both URLs work fine.
How is the second URL made? I tried checking out the wampmanager.ini and wampmanager.tpl but maybe I didn't know what to look for?
WINDOWS + WAMP solution
Step 1
Go to C:\wamp\bin\apache\Apache2.2.17\conf\ open httpd.conf file and change #Include conf/extra/httpd-vhosts.conf to Include conf/extra/httpd-vhosts.conf i.e. uncomment the line so that it can includes the virtual hosts file.
Step 2
Go to C:\wamp\bin\apache\Apache2.2.17\conf\extra and open httpd-vhosts.conf file and add the following code
<VirtualHost myWebsite.local>
DocumentRoot "C:/wamp/www/myWebsite/"
ServerName myWebsite.local
ServerAlias myWebsite.local
<Directory "C:/wamp/www/myWebsite/">
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
change myWebsite.local and C:/wamp/www/myWebsite/ as per your requirements.
Step 3
Open hosts file in C:/Windows/System32/drivers/etc/ and add the following line ( Don't delete anything )
127.0.0.1 myWebsite.local
change myWebsite.local as per your name requirements
Step 4
restart your server. That's it
WINDOWS + XAMPP solution
Same steps as that of WAMP just change the paths according to XAMPP which corresponds to path in WAMP
Copy the hosts file and add 127.0.0.1 and name which you want to show or run at the browser link. For example:
127.0.0.1 abc
Then run abc/ as a local host in the browser.
They are probably using a virtual host (http://www.keanei.com/2011/07/14/creating-virtual-hosts-with-wamp/)
You can go into your Apache configuration file (httpd.conf) or your virtual host configuration file (recommended) and add something like:
<VirtualHost *:80>
DocumentRoot /www/ap-mispro
ServerName ap-mispro
# Other directives here
</VirtualHost>
And when you call up http://ap-mispro/ you would see whatever is in C:/wamp/www/ap-mispro (assuming default directory structure). The ServerName and DocumentRoot do no have to have the same name at all. Other factors needed to make this work:
You have to make sure httpd-vhosts.conf is included by httpd.conf for your changes in that file to take effect.
When you make changes to either file, you have to restart Apache to see your changes.
You have to change your hosts file
http://en.wikipedia.org/wiki/Hosts_(file) for your computer to know
where to go when you type http://ap-mispro into your browser. This
change to your hosts file will only apply to your computer - not
that it sounds like you are trying from anyone else's.
There are plenty more things to know about virtual hosts but this should get you started.
please refer http://complete-concrete-concise.com/web-tools/how-to-change-localhost-to-a-domain-name
this is best solution ever
for new version of Wamp
<VirtualHost *:80>
ServerName domain.local
DocumentRoot C:/wamp/www/domain/
<Directory "C:/wamp/www/domain/">
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
After another hour or two I can actually answer my own question.
Someone on another forum mentioned that you need to keep a mention of plain ol' localhost in the httpd-vhost.conf file, so here's what I ended up with in there:
ServerName localhost
DocumentRoot "c:/wamp/www/"
DocumentRoot "C:/wamp/www/pocket/"
ServerName pocket.clickng.com
ServerAlias pocket.clickng.com
ErrorLog "logs/pocket.clickng.com-error.log"
CustomLog "logs/pocket.clickng.com-access.log" common
<Directory "C:/wamp/www/pocket/">
Options Indexes FollowSymLinks Includes
AllowOverride All
Order allow,deny
Allow from all
</Directory>
Exit WAMP, restart - good to go. Hope this helps someone else :)
go to C:\Windows\System32\drivers\etc and open hosts file and add
this
127.0.0.1 example.com
127.0.0.1 www.example.com
then go to C:\xampp\apache\conf\extra open httpd-ajp.conf file and add
<VirtualHost *:80>
DocumentRoot "C:/xampp/htdocs/pojectroot"
ServerName example.com
ServerAlias www.example.com
<Directory "C:/xampp/htdocs/projectroot">
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
WINDOWS + MAMP solution
Step 1
Go to S:\MAMPenter code here
\bin\apache\conf\ open httpd.conf file and change
#Include conf/extra/httpd-vhosts.conf
to
Include conf/extra/httpd-vhosts.conf i.e. uncomment the line so that it can includes the virtual hosts file.
Step 2
Go to S:\MAMP\bin\apache\conf\extra and open httpd-vhosts.conf file and add the following code
<VirtualHost myWebsite.local>
DocumentRoot "S:\MAMP\htdocs/myWebsite/"
ServerName myWebsite.local
ServerAlias myWebsite.local
<Directory "S:\MAMP\htdocsmyWebsite/">
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
change myWebsite.local and S:\MAMP\htdocs/myWebsite/ as per your requirements.
Step 3
Open hosts file in C:/Windows/System32/drivers/etc/ and add the following line ( Don't delete anything )
127.0.0.1 myWebsite.local
change myWebsite.local as per your name requirements
Step 4
restart your server. That's it
This method will work for xamp/wamp/lamp
1st go to your server directory, for example, C:\xamp
2nd go to apache/conf/extra and open httpd-vhosts.conf
3rd add following code to this file
<VirtualHost myWebsite.local>
DocumentRoot "C:/wamp/www/php-bugs/"
ServerName php-bugs.local
ServerAlias php-bugs.local
<Directory "C:/wamp/www/php-bugs/">
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
For DocumentRoot and Directory add your local directory
For ServerName and ServerAlias give your server a name
Finally go to C:/Windows/System32/drivers/etc and open hosts file
add 127.0.0.1 php-bugs.local and nothing else
For the finishing touch restart your server
For Multile local domain add another section of code into httpd-vhosts.conf
<VirtualHost myWebsite.local>
DocumentRoot "C:/wamp/www/php-bugs2/"
ServerName php-bugs.local2
ServerAlias php-bugs.local2
<Directory "C:/wamp/www/php-bugs2/">
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
and add your host into host file 127.0.0.1 php-bugs.local2
I put a folder called simple_cms in my httpdocs directory but my server won't start because my http.conf file is being written wrong how am I supposed to write it.
<VirtualHost *:80>
ServerName www.webappcompany.com
DocumentRoot /simple_cms/public
<Directory /simple_cms/public>
AllowOverride all
Options -MultiViews
</Directory>
Try changing the file paths in the DocumentRoot and Directory commands to the full path from your root directory: /???/httpdocs/simple_cms/public. I'm also using Mongrel + Passenger, and that's what my paths look like.
I've also got a RailsEnv production and some SSL stuff in mine, but other that that, yours looks just like it - hopefully it's just the file paths that are holding you back...
Hope this helps!
I'm trying to get multiple rails apps hosted under the same domain, but different directories. My configuration before attempting to host multiple apps (which works great), looks like this:
<VirtualHost *:443>
ServerName secure.mydomain.com
DocumentRoot /root/store/public
</VirtualHost>
I google'd around and found documentation suggesting I use the following configuration:
<VirtualHost *:443>
ServerName secure.mydomain.com
DocumentRoot /root
RailsBaseURI /store/public
RailsBaseURI /store2/public
</VirtualHost>
That configuration, however, only causes my directory structure to be revealed, and no app appears to run. Any advice would be great!
Not sure what you found on the Googles, but you might want to re-read the mod_rails docs on Deploying to sub URIs
I'm guessing you'll need to create some symbolic links (aliases) in your /root directory to the public folder of each application
ln -s /store/public /root/store