I have a UIWebView in the detail view of my split view controller application. Everything works fine, but the width of the web view does not change when the iPad is rotated. How can I ensure that the web view always occupies all available space in the detail view outside of the UIToolbar that lives at the top?
set the uiwebview frame property to match that of the parent view, adding some padding as needed.
WebView = [[UIWebView alloc] initWithFrame:CGRectMake(5, 5, self.view.frame.size.width -5, self.view.frame.size.height -5)];
use the "autoresize" and set flexible width and/or height. that should do the trick
WebView.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight;
Related
I'm trying to implement a ScrollView, but when I put a View inside, the View looks good in the preview but it's not the same when I run the application:
http://i.stack.imgur.com/ZZfEg.jpg
And I don't know how to resize a text of the width of the view.
Without the ScrollView I can do a good structured view but when I use ScrollView I cannot get a good view, how to do ?
Code here: http://pastebin.com/LN5FySku
I think this task is very easy if you use code rather than storyboard.
Use this code..
You can do this in Storyboard as well but i prefer using code for such tasks. Hope that helped.
UIScrollView *scrollView = [[UIScrollView alloc] initWithFrame:CGRectMake(0, 0, 320, 520)]; // little less than 568 to accommodate the tabBar
[scrollView setContentSize:CGSizeMake(320, 1500)];
UIView *largeView = [[UIView alloc] initWithFrame:CGRectMake(10, 10, 320, 100)];
[scrollView addSubview:largeView];
[self.view addSubview:scrollView];
for further more information check this link.
My problem is solved, the reasons:
UIImageView: I think my view have lost the images when i did a copy past of the view, so click on your UIImageView and set the image field.
UILabel: For the cropped text you have to create the Equal Width Constraint between the ContentView and the View, select the ContentView on the view hierarchy and Control + Drag to the View – you should get a pop-up that gives you the “Equal Widths” option.
I have a UiWebView that is accessed via a UiNavigation controller. In its view the toolbar is visible and the navigation bar is hidden.
I am trying to get the WebView to take up all the available space. I found this code:
- (void)viewDidLayoutSubviews
{
//make sure web view takes up all space
self.webView.frame = CGRectMake(0, 0, self.view.frame.size.width, self.view.frame.size.height);
}
This seems to work, but I would like to do this without using code and have it work for 3.5in and 4in screens.
Is this possible?
Set the AutoresizingMask property of the webview to flexible width and height.
webview.autoresizingMask=UIViewAutoresizingFlexibleHeight|UIViewAutoresizingFlexibleWidth;
I have a custom UIViewController which create a view containing an action bar at the top (view with 4 buttons), a tableview and then another view below the tableview. Layout is done all in code and is not using auto layout.
Everything works perfectly on various device with iOS 7.0 and 7.0.2, but in the simulator, the root view of the controller get anchored at the top right corner of the screen (0,0) instead of below the navigation bar.
I'm going to force the relay out in the viewDidAppear: method, but this seem like a hack...
Thanks for any insights
Edit: added an image. You can see the UIView highlighted. As ManicMonkOnMac mentioned, the UIView is under the toolbar (but this only happens in the simulator, on the device, the view lines up fine)
In the loadView method on the controller, i set the frame when creating the view:
- (void)loadView
{
// Our parent view controller will resize us appropriately. The size set
// here is a convenience for initial view layout.
self.view = [[UIView alloc] initWithFrame:CGRectMake(0, 0, 320, 320)];
self.view.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight;
}
But this frame is later changed. Not by my code, though, but by UIkit code)
Edit2: addded loadView method body
EDIT: After going through session 201 of WWDC 2013, I think I have the solution.
in iOS 7 there is a property that you can set on your view controllers to specify whether you want the views to be overlapped by navigation bar.
viewController.edgesForExtendedLayout = UIRectEdgeNone;//UIRectEdgeAll specifies that nav bars should overlap the view.
Unlike iOS 6, navigation bars are placed over the views in iOS 7.
Use the frame size that excludes the navigation bar.
code:
CGRect frame = CGRectMake(self.view.frame.origin.x,self.view.frame.origin.y+self.navigationController.navigationBar.frame.size.height,self.view.frame.size.width,self.view.frame.size.height);
CustomView *view = [[CustomView alloc] initWithFrame:frame];
[self.view addSubview: view];
I'm trying to make a square (50 x 50) UIView in the lower right hand of my main view, but I'm confused about why it's not entirely visible. In this instance, only the tip of it is visible from the bottom. Am I confusing some concept?
CGFloat width = CGRectGetWidth(self.view.bounds);
CGFloat height = CGRectGetHeight(self.view.bounds);
UIView *transparentFloater = [[UIView alloc] initWithFrame:CGRectMake(width - 50.f, height - 50.0f, 50.0f, 50.0f)];
[self.view addSubview:transparentFloater];
Try to add the autoresizing mask:
transparentFloater.autoresizingMask = UIViewAutoresizingFlexibleTopMargin | UIViewAutoresizingFlexibleLeftMargin;
If I am not wrong, You have created your ViewController with xib and in the attributes of view, you have forgot to mention that you are using a "navigation bar" as "top bar".
Reason
So in ViewDidLoad, view in .xib with a height X is returned. But as you might have loaded the viewController using UINavigationController, after loading the height of view is decreased by 44pixels.
Suggestions :
1) Whenever you know that you are going to have navigation bar on top please mention it in .xib file as well.
For doing so click on the view in xib and select the option called topbar in attributes Inspector of utilities area
2) Call the following api
NSLog(#"In ViewDidAppear %#",NSStringFromCGRect(self.view.bounds));
in
viewDidLoad
viewDidAppear
to track whats happening with the bounds of view
You does not need to do anything just put
transparentFloater.backgroundColor = [UIColor redColor];
because your view (custom) is invisible (because your main view color and custom view color are same (white) ) may be. I tried your code in my demo project. it worked perfectly for me.
I noticed that with a NavigationController on an iPhone, the height is 460. So it includes the whole screen except the status bar.
However, when I add something at coordinate 0, it shows up after the NavigationBar, although the size of the navigation bar is included in the height (meaning the entire frame of this view sticks off the screen).
Did I make a mistake? If not, why is it structured this way?
NSLog(#"Frame: %#", [NSValue valueWithCGRect: self.view.frame]); // prints {(0, 20), (320, 460)}
UIScrollView* scrollView = [[UIScrollView alloc] initWithFrame: CGRectMake(0, self.navigationController.navigationBar.frame.size.height, self.view.frame.width, 50)];
[self.view addSubview: scrollView]; // showing up 44px *after* the nav bar
I already answered your other similar question, but here is one for this.
In viewDidLoad you will see the views height as 460 because at that point it hasn't resized to account for the Nav Bar.
But If you printed the same frame out in say viewWillAppear you will see that now the frames height has adjusted for the Nav Bar.
So if you want to add something in viewDidLoad, you need to add it based on the views frame, add whichever resizing mask will do the job you want, and see it adjust correctly once the view appears.