A best practice in DI I've read in a few places is not to inject object B just to get at object C, but to inject C instead.
But if a single method from C is all that is required, would you just inject that method instead of C?
If so, what about if a few methods from C were required? Is there a point that it's just more convenient to pass in the full object and live with the fact that you're getting stuff you have no interest in?
Or does that point indicate that maybe class C has too many varied responsibilities and needs to be extracted into multiple smaller classes, the objects of which can then be injected without as much baggage?
Don't be afraid to state the obvious, this is all new to me.
If the dependency has (many) more methods than you care about, it's a pretty good sign that it's a Header Interface that violates the Interface Segregation Principle.
If you have control over the interface, I'd suggest splitting it up into several smaller Role Interfaces. You can still have one concrete class implementing more than one Role Interface if that makes more sense for your specific implementation.
If you don't control the design of the dependency, I'd tend towards injecting the whole interface, as it still represents a cohesive collection of behavior (even if we don't agree with the design choice of the original designer). You might need more of that behavior later on.
Related
If it was created by the class that is injecting it into the object that uses it then isn't it just moving object creation one step up the stack? And wouldn't this mean that all objects needed by lower level classes would need to be passed through each object one at a time until it reached the object that needed it?
All objects and their dependencies could be set up at the very beginning, but wouldn't this dent performance as objects will be hanging around until needed?
Yes, it is moving the object instantiation up the stack. But it is moving it up the stack to a place where you can make a better decision as to which implementation to actually use. If I want to replace my data access layer with a stubbed version to do performance testing of the business logic, I can without changing a single line of the business logic code.
There are may ways to inject your dependencies. In my case, I use constructor injection everywhere. Using this method, if a lower level class needs a dependency, it just puts the interface for that dependency in its constructor. No need to pass from a class higher up in the stack. If you need the same instance in both classes, then you should look at the lifestyle/scope of when registering your dependency into the container so that both classes happen to get passed the same instance.
Some DI implementations use lazy loading to instantiate their objects. (i.e. it's not until the object is attempted to be used that it is actually instantiated) Some do not. Also, you would need quite the large dependency graph to make a dent in performance. Keep your constructors simple and fast (a good practice anyway) and this will not be a problem, I assure you. And DI containers are smart about releasing objects that are no longer in use (again, pay special attention to lifestyle/scope).
I hope this helps.
Heyho,
There´s a question in my mind for some time now, which hopefully can be cleared quickly by some of you:
I am a big fan of MVC, ASP.Net Mvc in my case.
What I have noticed is the hype about interfaces. Every video, tutorial and book seems to solve any kind of abstraction with interfaces. I have adapted these patterns, understood why and how and I am basically very happy with it.
But I just don´t get why interfaces are used everywhere. I´ve almost never seen some abstraction being done with abstract base classes, which I don´t understand. Maybe I miss something? I know that you can only inherit from one base class while multiple interfaces are possible. But interfaces do have disadvantages, especially when some changes need to be done, which breaks your implementations.
In my projects so far, I only used to pick interfaces for completely different classes.
For example, the whole repository pattern could be done with an abstract base class, still providing testability and exchangeability, or did I miss something?
Please point me to the part where my brain laggs :)
Interfaces are used in tutorials, blogs and elsewhere because those authors are particularly influenced by a group of methodology called "design for testability".
Primarily, design for testability school of thoughts used interface every way because they want to be able to mock any component under tests. If you use concrete class, then a lot of mocking tools can't mock those class, and hence will make it difficult to test your code.
A Story
I once attended a Java user group
meeting where James Gosling (Java's
inventor) was the featured speaker.
During the memorable Q&A session,
someone asked him: "If you could do
Java over again, what would you
change?" "I'd leave out classes," he
replied. After the laughter died down,
he explained that the real problem
wasn't classes per se, but rather
implementation inheritance (the
extends relationship). Interface
inheritance (the implements
relationship) is preferable. You
should avoid implementation
inheritance whenever possible.
While using only or mostly Interfaces does have code reuse problems(as well as eliminating nice base classes), It makes it a lot easier to do Multiple Inheritance like things. As well as having widely different implementations that will work and where you don't have to worry about the base class changing or even what it does(you do have to implement the whole thing though so its a trade off).
P.S. I think the new Go language is based on interfaces rather then inheritance(looks sort of interesting).
If the language doesn't support multiple inheritance or mix-ins abstract base classes are limited in scope compared to interfaces. E.g. in .NET if you must inherit from some other type such as MarshalByRef, you can't use an abstract base class to implement a pattern. Interfaces do not impose this restriction.
Besides the fact you mentioned that you can inherit from a single base class only (which is pretty inconvenient if you want to use an existing class that already inherits from some class with the new framework base class), you also avoid the fragile base class problem if you use interfaces instead.
Coding against interfaces makes your design more flexible and extensible. For instance, plugin frameworks and dependency injection. Without interfaces, the extensibility of it is pretty much limited.
Read about interfaces, abstract classes, breaking changes, and MVC here: http://ayende.com/Blog/archive/2008/02/21/Re-Versioning-Issues-With-Abstract-Base-Classes-and-Interfaces.aspx.
One solution that is presented there (or somewhere else on Ayende's blog) is: do use interface but also provide abstract classes. Those who case about breaking changes can base their implementations on abstract classes. Those who need power of interfaces are also satisfied. But do make sure your methods accept interfaces, not abstract classes, as input.
I've had a certain feeling these last couple of days that dependency-injection should really be called "I can't make up my mind"-pattern. I know this might sound silly, but really it's about the reasoning behind why I should use Dependency Injection (DI). Often it is said that I should use DI, to achieve a higher level of loose-coupling, and I get that part. But really... how often do I change my database, once my choice has fallen on MS SQL or MySQL .. Very rarely right?
Does anyone have some very compelling reasons why DI is the way to go?
Two words, unit testing.
One of the most compelling reasons for DI is to allow easier unit testing without having to hit a database and worry about setting up 'test' data.
DI is very useful for decoupling your system. If all you're using it for is to decouple the database implementation from the rest of your application, then either your application is pretty simple or you need to do a lot more analysis on the problem domain and discover what components within your problem domain are the most likely to change and the components within your system that have a large amount of coupling.
DI is most useful when you're aiming for code reuse, versatility and robustness to changes in your problem domain.
How relevant it is to your project depends upon the expected lifespan of your code. Depending on the type of work you're doing zero reuse from one project to the next for the majority of code you're writing might actually be quite acceptable.
An example for use the use of DI is in creating an application that can be deployed for several clients using DI to inject customisations for the client, which could also be described as the GOF Strategy pattern. Many of the GOF patterns can be facilitated with the use of a DI framework.
DI is more relevant to Enterprise application development in which you have a large amount of code, complicated business requirements and an expectation (or hope) that the system will be maintained for many years or decades.
Even if you don't change the structure of your program during development phases you will find out you need to access several subsystems from different parts of your program. With DI each of your classes just needs to ask for services and you're free of having to provide all the wiring manually.
This really helps me on concentrating on the interaction of things in the software design and not on "who needs to carry what around because someone else needs it later".
Additionally it also just saves a LOT of work writing boilerplate code. Do I need a singleton? I just configure a class to be one. Can I test with such a "singleton"? Yes, I still can (since I just CONFIGURED it to exist only once, but the test can instantiate an alternative implementation).
But, by the way before I was using DI I didn't really understand its worth, but trying it was a real eye-opener to me: My designs are a lot more object-oriented as they have been before.
By the way, with the current application I DON'T unit-test (bad, bad me) but I STILL couldn't live with DI anymore. It is so much easier moving things around and keeping classes small and simple.
While I semi-agree with you with the DB example, one of the large things that I found helpful to use DI is to help me test the layer I build on top of the database.
Here's an example...
You have your database.
You have your code that accesses the database and returns objects
You have business domain objects that take the previous item's objects and do some logic with them.
If you merge the data access with your business domain logic, your domain objects can become difficult to test. DI allows you to inject your own data access objects into your domain so that you don't depend on the database for testing or possibly demonstrations (ran a demo where some data was pulled in from xml instead of a database).
Abstracting 3rd party components and frameworks like this would also help you.
Aside from the testing example, there's a few places where DI can be used through a Design by Contract approach. You may find it appropriate to create a processing engine of sorts that calls methods of the objects you're injecting into it. While it may not truly "process it" it runs the methods that have different implementation in each object you provide.
I saw an example of this where the every business domain object had a "Save" function that the was called after it was injected into the processor. The processor modified the component with configuration information and Save handled the object's primary state. In essence, DI supplemented the polymorphic method implementation of the objects that conformed to the Interface.
Dependency Injection gives you the ability to test specific units of code in isolation.
Say I have a class Foo for example that takes an instance of a class Bar in its constructor. One of the methods on Foo might check that a Property value of Bar is one which allows some other processing of Bar to take place.
public class Foo
{
private Bar _bar;
public Foo(Bar bar)
{
_bar = bar;
}
public bool IsPropertyOfBarValid()
{
return _bar.SomeProperty == PropertyEnum.ValidProperty;
}
}
Now let's say that Bar is instantiated and it's Properties are set to data from some datasource in it's constructor. How might I go about testing the IsPropertyOfBarValid() method of Foo (ignoring the fact that this is an incredibly simple example)? Well, Foo is dependent on the instance of Bar passed in to the constructor, which in turn is dependent on the data from the datasource that it's properties are set to. What we would like to do is have some way of isolating Foo from the resources it depends upon so that we can test it in isolation
This is where Dependency Injection comes in. What we want is to have some way of faking an instance of Bar passed to Foo such that we can control the properties set on this fake Bar and achieve what we set out to do, test that the implementation of IsPropertyOfBarValid() does what we expect it to do, i.e. return true when Bar.SomeProperty == PropertyEnum.ValidProperty and false for any other value.
There are two types of fake object, Mocks and Stubs. Stubs provide input for the application under test so that the test can be performed on something else. Mocks on the other hand provide input to the test to decide on pass\fail.
Martin Fowler has a great article on the difference between Mocks and Stubs
I think that DI is worth using when you have many services/components whose implementations must be selected at runtime based on external configuration. (Note that such configuration can take the form of an XML file or a combination of code annotations and separate classes; choose what is more convenient.)
Otherwise, I would simply use a ServiceLocator, which is much "lighter" and easier to understand than a whole DI framework.
For unit testing, I prefer to use a mocking API that can mock objects on demand, instead of requiring them to be "injected" into the tested unit from a test. For Java, one such library is my own, JMockit.
Aside from loose coupling, testing of any type is achieved with much greater ease thanks to DI. You can put replace an existing dependency of a class under test with a mock, a dummy or even another version. If a class is created with its dependencies directly instantiated it can often be difficult or even impossible to "stub" them out if required.
I just understood tonight.
For me, dependancy injection is a method for instantiate objects which require a lot of parameters to work in a specific context.
When should you use dependancy injection?
You can use dependancy injection if you instanciate in a static way an object. For example, if you use a class which can convert objects into XML file or JSON file and if you need only the XML file. You will have to instanciate the object and configure a lot of thing if you don't use dependancy injection.
When should you not use depandancy injection?
If an object is instanciated with request parameters (after a submission form), you should not use depandancy injection because the object is not instanciated in a static way.
I've read a lot about IoC and DI, but I'm not really convinced that you gain a lot by using them in most situations.
If you are writing code that needs pluggable components, then yes, I see the value. But if you are not, then I question whether changing a dependency from a class to an interface is really gaining you anything, other than more typing.
In some cases, I can see where IoC and DI help with mocking, but if you're not using Mocking, or TDD then what's the value? Is this a case of YAGNI?
I doubt you will have any hard data on it, so I will add some thoughts on it.
First, you don't use DI (or other SOLID principles) because it helps you do TDD. Its the other way around, you do TDD because it helps you with the design - which usually means you get code that follow those principles.
Discussing why to use interfaces is a different matter, see: https://stackoverflow.com/questions/667139/what-is-the-purpose-of-interfaces.
I will assume you agree that having your classes do many different things results in messy code. Thus, I am assuming you are already going for SRP.
Because you have different classes that do specific things, you need a way to relate them. If you relate them inside the classes (i.e. the constructors), you get plenty of code that uses specific versions of the classes. This means that making changes to the system will be hard.
You are going to need to change the system, that's a fact of software development. You can call YAGNI about not adding specific extra features, but not on that you won't be needing to change the system. In my case that's something really important as I do weekly sprints.
I use a DI framework where configuration is done through code. With a really small code configuration, you hook up lots of different relations. So, when you take away the discussion on interface vs. concrete classes, you are actually saving typing not the other way around. Also for the cases a concrete class is on the constructor, it hooks it up automatically (I don't have to configure) building the rest of the relations. It also allows me to control some objects life time, in particular I can configure an object to be a Singleton and it hands a single instance all the time.
Also note that just using these practices isn't more overhead. Using them for the first times, is what causes the overhead (because of the learning process + in some cases mind set change).
Bottom line: you ain't gonna need to put all those constructor calls all over the place to go faster.
The most significant gains from DI are not necessarily due to the use of interfaces. You do not actually need to use interfaces to have beneficial effects of dependency injection. If there's only one implementation you can probably inject that directly, and you can use a mix of classes and interfaces.
You're still getting loose coupling, and quite a few development environments you can introduce that interface with a few keypresses if needed.
Hard data on the value of loose coupling I cannot give, but it's been a vision in textbooks for as long as I can remember. Now it's real.
DI frameworks also give you some quite amazing features when it comes to hierarchical construction of large structures. Instead of looking for the leanest DI framework around, I'd recommend you look for a full-featured one. Less isn't always more, at least when it comes to learning about new ways of programming. Then you can go for less.
Apart from testing also the loose coupling is worth it.
I've worked on components for an embedded Java system, which had a fixed configuration of objects after startup (about 50 mostly different objects).
The first component was legacy code without dependency injection, and the subobjects where created all over the place. Now it happened several times that for some modification some code needed to talk to an object which was only available three constructors away. So what can you do but add another parameter to the constructor and pass it through, or even store it in a field to pass it on later. In the long run things became even more tangled than they already where.
The second component I developed from scratch, and used dependency injection (without knowing it at the time). That is, I had one factory which constructed all objects and injected then on a need to know basis. Adding another dependency was easy, just add it to the factory and the objects constructor (or add a setter to avoid loops). No unrelated code needed to be touched.
I've been using StructureMap recently and have enjoyed the experience thoroughly. However, I can see how one can easily get carried away with interfacing everything out and end up with classes that take in a boatload of interfaces into their constructors. Even though that really isn't a huge problem when you're using a dependency injection framework, it still feels that there are certain properties that really don't need to be interfaced out just for the sake of interfacing them.
Where do you draw the line on what to interface out vs just adding a property to the class?
The main problem with dependency injection is that, while it gives the appearance of a loosely coupled architecture, it really doesn't.
What you're really doing is moving that coupling from the compile time to the runtime, but still if class A needs some interface B to work, an instance of a class which implements interface B needs still to be provided.
Dependency injection should only be used for the parts of the application that need to be changed dynamically without recompiling the base code.
Uses that I've seen useful for an Inversion of Control pattern:
A plugin architecture. So by making the right entry points you can define the contract for the service that must be provided.
Workflow-like architecture. Where you can connect several components dynamically connecting the output of a component to the input of another one.
Per-client application. Let's say you have various clients which pays for a set of "features" of your project. By using dependency injection you can easily provide just the core components and some "added" components which provide just the features the client have paid.
Translation. Although this is not usually done for translation purposes, you can "inject" different language files as needed by the application. That includes RTL or LTR user interfaces as needed.
Think about your design. DI allows you to change how your code functions via configuration changes. It also allows you to break dependencies between classes so that you can isolate and test objects easier. You have to determine where this makes sense and where it doesn't. There's no pat answer.
A good rule of thumb is that if its too hard to test, you've got some issues with single responsibility and static dependencies. Isolate code that performs a single function into a class and break that static dependency by extracting an interface and using a DI framework to inject the correct instance at runtime. By doing this, you make it trivial to test the two parts separately.
Dependency injection should only be used for the parts of the
application that need to be changed dynamically without recompiling
the base code
DI should be used to isolate your code from external resources (databases, webservices, xml files, plugin architecture). The amount of time it would take to test your logic in code would almost be prohibitive at a lot of companies if you are testing components that DEPEND on a database.
In most applications the database isn't going to change dynamically (although it could) but generally speaking it's almost always good practice to NOT bind your application to a particular external resource. The amount involve in changing resources should be low (data access classes should rarely have a cyclomatic complexity above one in it's methods).
What do you mean by "just adding a property to a class?"
My rule of thumb is to make the class unit testable. If your class relies on the implementation details of another class, that needs to be refactored/abstracted to the point that the classes can be tested in isolation.
EDIT: You mention a boatload of interfaces in the constructor. I would advise using setters/getters instead. I find that it makes things much easier to maintain in the long run.
I do it only when it helps with separation of concerns.
Like maybe cross-project I would provide an interface for implementers in one of my library project and the implementing project would inject whatever specific implementation they want in.
But that's about it... all the other cases it'd just make the system unnecessarily complex
Even with all the facts and processes in the world.. every decision boils down to a judgment call - Forgot where I read that
I think it's more of a experience / flight time call.
Basically if you see the dependency as a candidate object that may be replaced in the near future, use dependency injection. If I see 'classA and its dependencies' as one block for substitution, then I probably won't use DI for A's deps.
The biggest benefit is that it will help you understand or even uncover the architecture of your application. You'll be able to see very clearly how your dependency chains work and be able to make changes to individual parts without requiring you to change things that are unrelated. You'll end up with a loosely coupled application. This will push you into a better design and you'll be surprised when you can keep making improvements because your design will help you keep separating and organizing code going forward. It can also facilitate unit testing because you now have a natural way to substitute implementations of particular interfaces.
There are some applications that are just throwaway but if there's a doubt I would go ahead and create the interfaces. After some practice it's not much of a burden.
Another item I wrestle with is where should I use dependency injection? Where do you take your dependency on StructureMap? Only in the startup application? Does that mean all the implementations have to be handed all the way down from the top-most layer to the bottom-most layer?
I use Castle Windsor/Microkernel, I have no experience with anything else but I like it a lot.
As for how do you decide what to inject? So far the following rule of thumb has served me well: If the class is so simple that it doesn't need unit tests, you can feel free to instantiate it in class, otherwise you probably want to have a dependency through the constructor.
As for whether you should create an interface vs just making your methods and properties virtual I think you should go the interface route either if you either a) can see the class have some level of reusability in a different application (i.e. a logger) or b) if either because of the amount of constructor parameters or because there is a significant amount of logic in the constructor, the class is otherwise difficult to mock.