I've run "bundle install" on an existing Rails 3 app which has the gems in vendor/cache (I guess they were packed via "bundle package" before) and valid Gemfile and Gemfile.lock files.
What I saw is, it created a folder .bundle in my home dir.
I am using also RVM. When I tried "gem list", I didn't see any of the gems in vendor/cache installed.
Am I doing something wrong? Everywhere the bundler articles say, execute "bundle" or "bundle install" to install the gems in the Gemfile and Gemfile.lock files. Is the problem connected with the RVM usage?
Thanks for any advice.
If you give an argument to bundle install, it will keep installing the gems inside this directory, even if you rm -rf that directory and start from scratch with the pure bundle install, as noted in Emil's comment. This new directory is taken by default by bundler, and it even supersedes what you declare in the .rvmrc file.
To remove this constraint, simply edit the .bundle/config file and delete the file declaring BUNDLE_PATH, e.g.,
BUNDLE_PATH: /usr/local/lib/
Look in rvm env gemdir, also check what you've got set in .rvmrc in terms of a gemset. Do bundle install and it should get all the gems.
Check .bundle by doing $ cat .bundle to see its content , and check if it is copying the gems to vendor/ruby. This will only be the case if bundle install --path vendor/ruby was supplied (Ref).
Related
I was reading the book Rails Way. And it discusses running "bundle package". This will store all the .gem files your app uses in vendor/cache. Running bundle install will prefer gems in vendor/cache to gems in other locations. I am using rvm, so I tested this with rvm:
rvm gemset create rent_prototype
rvm use 2.2.1#rent_prototype
gem install rails
rvm gemdir
/home/viggy/.rvm/gems/ruby-2.2.1#rentme_prototype
$ cd /home/viggy/.rvm/gems/ruby-2.2.1#rentme_prototype
$ ls -l devise-4.1.1
ls: cannot access devise-4.1.1: No such file or directory
Above I created a gemset with rvm and checked if the devise gem was installed, and it was not since it is not in Gemfile. Now I use bundle package:
$ cd -
$ bundle package
Updating files in vendor/cache
* rake-11.1.2.gem
* i18n-0.7.0.gem
* json-1.8.3.gem
...
$ cd vendor/cache
$ ls -l devise-4.1.1
ls: cannot access devise-4.1.1: No such file or directory
Of course, no devise gem in vendor/cache either.
Then I modify Gemfile and add:
gem 'devise'
Then I run bundle install.
Now I check where devise was installed:
$ bundle show devise
/home/viggy/.rvm/gems/ruby-2.2.1#rentme_prototype/gems/devise-4.1.1
$ cd vendor/cache
$ ls -l devise-4.1.1
ls: cannot access devise-4.1.1: No such file or directory
So when I install a gem, it installs in the rvm folder. It does not prefer vendor/cache to other locations. If that is the case, what is the purpose of "bundle package" when you are using rvm?
As per my comment. You didn't run package after adding devise to your gem file which is why it isn't in vendor/cache. Bundle install still needs to install the gems on your system.
From bundler website
The package command will copy the .gem files for your gems in the bundle into ./vendor/cache. Afterward, when you run bundle install,
Bundler will use the gems in the cache in preference to the ones on rubygems.org.
Additionally, if you then check that directory into your source
control repository, others who check out your source will be able to
install the bundle without having to download any additional gems.
The rvm gemset and bundler solve some of the same problems with which set of gems/versions are to be used / activated. With bundler now you don't need to use rvm gemsets , the gemfile handles it. But this wasn't always the case.
I've somehow changed the configuration of bundle install, so it now creates a /vendor/bundle folder in my rails project, and puts all the gems there.
How can I reset my bundle config, so it installs the gems globally instead?
Remove the .bundle directory from your project root and then do a bundle install instead of the bundle install --path vendor like previously.
The .bundle/config file stores the local path for installing gem location, if gems are installed within the app, and bundler picks up those settings next time onwards by default.
Whenever I do bundle install all of the gems get installed at
app_dir/vendor/bundle
path and consumes loads of disk space. I also tried installing gems where it should get installed i.e gemsets while development by this:
bundle install --no-deployement
but this isn't working for me and installeing gems at vendor/bundle. How can I make it to be installed globally for all applications or in ruby gemsets location ? I also tried removing .bundle/config but nothing changed.
I am using:
rvm version: 1.23.14
ruby version: 2.0.0-p247
rails 3.2.13
Here is my ~/.bash_profile:
export PATH=/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin
eval "$(rbenv init -)"
alias pg='pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log'
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # Load RVM function
My ~/.bashrc:
PATH=$PATH:$HOME/.rvm/bin # Add RVM to PATH for scripting
Some other information that you might need:
aman#Amandeeps-MacBook-Pro ~/Projects/qe (develop)*$ which bundle
/Users/aman/.rvm/gems/ruby-2.0.0-p247#global/bin/bundle
aman#Amandeeps-MacBook-Pro ~/Projects/qe (develop)*$ rbenv which bundle
/Users/aman/.rbenv/versions/2.0.0-p247/bin/bundle
amandeep#Amandeeps-MacBook-Pro ~/Projects/qe (develop)*$ rbenv which ruby
/Users/aman/.rbenv/versions/2.0.0-p247/bin/ruby
aman#Amandeeps-MacBook-Pro ~/Projects/qe (develop)*$ rbenv gemset active
rbenv: NO such command `gemset'
aman#Amandeeps-MacBook-Pro ~/Projects/qe (develop)*$ which rails
/Users/aman/.rvm/gems/ruby-2.0.0-p247#global/bin/rails
I tried this also but didn't helped:
bundle install --system
and removing .bundle directory.
Please help me in installing gems in gemsets not vendor/bundle or a default place.
In your project folder you will have .bundle directory that holds configuration for bundler. try deleting that folder. it should reset the install path for your gems back to system-wide settings.
In the case you just want to edit the install path, opening .bundle/config with your favorite editor should show you the path to vendor/bundle. Removing that line will restore it to defaults without removing other configs you might have.
Also, another less frequent scenario is your system-wide settings being messed up. According to #NaoiseGolden:
I had to delete .bundle from my Home folder (rm -rf ~/.bundle). You can check out your configuration running bundle env
Try installing using
bundle install --system
I think initially the bundle install was run with --path flag and bundler now rememebers that confguration.
From the bundler man page
Some options are remembered between calls to bundle install, and by the Bundler runtime.
Subsequent calls to bundle install will install gems to the directory originally passed to --path. The Bundler runtime will look for gems in that location. You can revert this option by running bundle install --system.
EDIT: As mentioned in comments below, and also otherwise, this installs the gems system wide. In case you are using rvm etc to manage your environment for different apps, check #IuriG's answer mentioned above.
Use bundle env to view paths and bundle configuration
After this set bundle path to ~/.rvm/gems/ruby-2.0.0-p247 like this:
bundle install --path ~/.rvm/gems/ruby-2.0.0-p247
which is global and also you can use your own custom path.
Post this bundle install will never need path again and will always install all of your gems in that directory(~/.rvm/gems/ruby-2.0.0-p247 in my case) for that app not in app_folder/vendor/bundle
Try running bundle env. This will tell you where the path configuration is set.
First of all, acording to your info, it seems that you have installed both rvm and rbenv. Thats a very bad idea. You have to delete one of them (rbenv + bundler works like a charm for me, didnt try rvm).
In regard to your question check .bundle/config in your project, as all the configuration for bundle to that project lies there (if its still deleted, you can create a new one). You migh want to add this line (or change it, if its already there): BUNDLE_DISABLE_SHARED_GEMS: '0' for sharing gems, they go where your BUNDLE_PATH: is set (BUNDLE_PATH: vendor in my case).
For the global configuration file look in ~/.bundle/config
Also this man page could be of use: bundle config
To Install Gem in system wide avoiding path vendor/bundle, just run the following command in project directory
bundle install --system
$ brew install rbenv
$ rbenv install 2.7.6
$ rbenv install -l
2.7.6
$ rbenv global 2.7.6
$ gem install bundler
$ brew install rbenv-gemset
$ rbenv gemset create 2.7.6 mygemset
$ gem env home
/Users/myuser/.rbenv/versions/2.7.6/gemsets/mygemset
$ gem install rails
$ rails new myapp && cd myapp
$ bundle install
$ bundle show --paths
/Users/myuser/.rbenv/versions/2.7.6/gemsets/myapp/gems/actioncable-7.0.1
...
$ bundle config set --local path 'vendor/bundle'
$ file .bundle
$ .bundle: directory
$ cat .bundle/config
---
BUNDLE_PATH: "vendor/bundle"
$ bundle install # Note from time to time you will get some bizarre error "Could not find timeout-0.2.0 in any of the sources". Simply delete Gemfile.lock and run bundle install again.
$ bundle show --paths
/Users/myuser/myapp/vendor/bundle/ruby/2.7.0/gems/actioncable-7.0.4
$ bundle config set --local system 'true' # or you may want to delete BUNDLE_PATH: "vendor/bundle" from .bundle/config
$ rm -rf vendor/bundle
$ rbenv gemset active
mygemset global
$ bundle install
$ bundle show --paths
/Users/myuser/.rbenv/versions/2.7.6/gemsets/mygemset
All in all, when you install a ruby version manager, such as the preferable rbenv, then it will install gems according to its setup. However, if you update .config/bundle in your project to use 'vendor/bundle', then that's where 'bundle install' will install gems. Sometimes this is used to keep project specific gems, instead of using a gemset tool like rbenv-gemset. Other times it is required for deployment, such as deploying to AWS Lambda on its ruby2.7 runtime. The use of 'vendor/bundle' can be easily removed by removing its reference from .config/bundle as shown above. Once it is removed, it will default to the gem environment that exists globally, which in the above case is managed by rbenv.
When i try to do bundle install, my gem_path and gem_home point to /usr/local/rvm/gems/ which i don't have write access and it fails because of invalid permissions. because of this i've changed both paths to a local directory where i do have write access.
when doing so, i do a bundle install, i get :
bruno#test6:~$ bundle install
Fetching gem metadata from https://rubygems.org/.........
Fetching gem metadata from https://rubygems.org/..
Bundler::GemspecError: Could not read gem at /afs/varda.io/user/b/br/bruno/test6/cache/rake-10.1.0.gem. It may be corrupted.
An error occurred while installing rake (10.1.0), and Bundler cannot continue.
Make sure that `gem install rake -v '10.1.0'` succeeds before bundling.
well, if i do a gem install, it works just fine.
but bundle would just not work; even if a try to delete the cache folder that it complains about.
i did try "bundle install --no-cache" and it fails in the same way. (bundle install --deployment works fine too) how do i get bundle install to work ?
i've spent quite a bit of time, if anyone would have any guidance , i would really appreciate it!
Fixed it by deleting cache file and re-running bundle install.
rm -rf <location_of_cache>. In your case:
rm -rf /afs/varda.io/user/b/br/bruno/test6/cache
okay, first of all, you could solve all this issues easily by using rvm (user installation), see http://rvm.io, if that is not an option, you could try using project-specific gem paths.
for example i have the following bundler config file (~/.bundle/config)
---
BUNDLE_PATH: .bundle
BUNDLE_DISABLE_SHARED_GEMS: "1"
which causes bundler to install all gems in a .bundle sub directory (inside your project folder, where you run bundle install). now, if you remember to use bundle exec for your bins (e.g. cap(istrano)), you're fine.
if you somehow f*cked up your bundler / cache, try deleting the .bundle folder (in your project folder)
rvm reinstall all worked for me.
Before you do that, I would try
gem update --system
gem pristine --all --no-extensions
please note that rvm reinstall all takes a lot of time to complete...
If it's feasible, I recommend installing your own copy of rvm in ~/.rvm so you aren't tied to the system one. Trying to have a hybrid system+user approach will likely lead to more headaches later on.
Or, if you're open to alternate solutions, rbenv is a leaner & cleaner ruby manager.
Try to tell to bundler which folder it must use, something like bundle install --path <myfolder> or bundle install --path gems.
Note that I didn't test this yet, but it seems promising, please post the result for us.
I have rvm installed and have created .ruby-version specifying 1.9.3 and .ruby-gemset specifying my_project in my project directory. And when i run gem env gemdir it returns: /Users/danielfriisjensen/.rvm/gems/ruby-1.9.3-p392#my_project.
However, when I run bundle install, all the gems that I have specified in my gemfile are put in my_project/vendor/bundle/gems
Bundler was remembering the location from the first time I ran bundle install. Had to 'reset' bundler's memory be running rm -r .bundle/config