I m trying setup a cassandra cluster as a test bed but gave the JMX remote connection error. I seem to found the answer for my error from cassandra FAQ page
Nodetool says "Connection refused to host: 127.0.1.1" for any remote host. What gives?
Nodetool relies on JMX, which in turn relies on RMI, which in turn sets up it's own listeners and connectors as needed on each end of the exchange. Normally all of this happens behind the scenes transparently, but incorrect name resolution for either the host connecting, or the one being connected to, can result in crossed wires and confusing exceptions.
If you are not using DNS, then make sure that your /etc/hosts files are accurate on both ends. If that fails try passing the -Djava.rmi.server.hostname=$IP option to the JVM at startup (where $IP is the address of the interface you can reach from the remote machine).
But can somebody help me on how to do -Djava.rmi.server.hostname=$IP
Or what to add is hosts file, i know that in hosts normally we add "IP Alias", but whose ip and alias.
I dont know much java or either linux
I m currently working on ubuntu v10.04 and cassandra v0.74
Sudesh
For JMX you need to enable JMX-remoting:
java -Dcom.sun.management.jmxremote
Depending on from where you want to access the jmx-server, you also need to specify a port:
-Dcom.sun.management.jmxremote.port=12345
and set or disable passwords.
Have a look at http://download.oracle.com/javase/1.5.0/docs/guide/management/agent.html for more details.
Related
I created the 3 necessary containers for NuoDB using the NuoDB instructions.
My Docker environment runs on a virtual Ubuntu Linux environment (VMware).
Afterwards I tried to access the database using a console application (C# .Net Framework 4.8) and the Ado.Net technology. For this I used the Nuget "NuoDb.Data.Client" from Nuget.org.
Unfortunately the connection does not work.
If I choose port 8888, my thread disappears to infinity when I open the connection.
For this reason I tried to open the port 48004 to get to the admin container.
On this way I get an error message.
"System.IO.IOException: A connection attempt failed because the remote peer did not respond properly after a certain period of time, or the established connection was faulty because the connected host did not respond 172.18.0.4:48006, 172.18.0.4"
Interestingly, if I specify a wrong database name, it throws an error:
No suitable transaction engine found for database.
This tells me that it connects to the admin container.
Does anyone have any idea what I am doing wrong?
The connection works when I establish a connection with the tool "dbvisualizer".
This tool accesses the transaction engine directly. For this reason I have opened the port 48006 in the corresponding container.
But even with these settings it does not work with my console application.
Thanks in advance.
Port 8888 is the REST port that you would use from the administration tool such as nuocmd: it allows you to start/stop engines and perform other administrative commands. You would not use this port for SQL clients (as you discovered). The correct port to use for SQL clients is 48004.
Port 48004 allows a SQL client to connect to a "load balancer" facility that will redirect it to one of the running TEs. It's not the case that the SQL traffic is routed through this load balancer: instead, the load balancer replies to the client with the address/port of one of the TEs then the client will disconnect from the load balancer and re-connect directly to the TE at that address/port. For this reason, all the ports that TEs are listening on must also be open to the client, not just 48004.
You did suggest you opened these ports but it's not clear from your post whether you followed all the instructions on the doc page you listed. In particular, were you able to connect to the database using the nuosql command line tool as described here? I strongly recommend that you ensure that simple access like this works correctly, before you attempt to try more sophisticated client access such as using Ado.Net.
I've developed a Grails application and I want my coworkers to be able to test it. They are on my network so I figure they can access it by using my IP address and the port number (8080). I've tried running it according to the steps laid out here and here to no avail.
I noticed that whenever I run the program, even when I follow those instructions, it says:
Grails application running at http://localhost:8080 in environment: development
Basic networking stuff here.
When something starts on interface 127.0.0.1 port something
Usually that port is then available for all the interfaces on the machine
if you run netstat -plant you will see running ports open on the machine.
Basically what ever ipconfig or ifconfig tells under Linux as your internal interface something like 192.168.1.x
The app is then available on http://192.168.1.x:8080
If you can't access it from other machines on network start by trying to ping {your machine ip}
It sounds like network security stopping local access from 1 machine accessing another.
Or even better still your good old MS firewall try stopping your security stuff on your desktop
It's not clear if you can access the app yourself on your own machine? It should be available at:
http://localhost:8080/appname
Your co-workers should be able to access the app by changing localhost to your computer name:
http://mycomputername:8080/appname
The new version of Docker (version 1.10) includes a DNS server to pass alias information from other hosts on the same network. There used to be hosts file entries for resolving linked containers (or containers on the same network). I am wondering if it is possible to use this embedded DNS server on an overlay network? I have looked in the documentation (and in issues) and cannot find information about this.
So the way the new embedded DNS "server" works is that it isn't a formal server. It's just an embedded listener for traffic to 127.0.0.11:53 (udp of course). When docker sees that query traffic on the container's network interface, it steps in with its embedded DNS server and replies with any answers it might have to the query. The documentation has some options you can set to affect how this DNS server behaves, but since it only listens for query traffic on that localhost address, there is no way to expose this to an overlay network in the way that you are thinking. However this seems to be a moving target, and I have seen this question before in IRC, so it may one day be the case that this embedded DNS server at least becomes pluggable, or possibly exposable in the way you would like.
I believe the way to creating a remote connection is by changing this line in conf/neo4j-server.properties, specifically by removing the comment and restarting the server.
org.neo4j.server.webserver.address=0.0.0.0
My URL is https://0.0.0.0:7473/browser/ and works on the local machine, but when I test the URL in Safari on iPhone over 3G, it cannot connect.
What do I set the address to in the properties file?
I thought it was the IP address of my computer, but after trying the remote address which I got from Googling “ip address mac” that didn’t work, nor did (obviously) the local IP address of my machine, 192.168.0.14
I should point out that setting it to the IP address from Google throws an error and the log reads:
2015-01-29 17:10:08.888+0000 INFO [API] Failed to start Neo Server on port [7474], reason [MultiException[java.net.BindException: Can't assign requested address, java.net.BindException: Can't assign requested address]]
With default configuration Neo4j only accepts local connections
In neo4j-community-3.1.0 edit conf/neo4j.conf file and uncomment the following to accept non-local connections
dbms.connectors.default_listen_address=0.0.0.0
By setting
org.neo4j.server.webserver.address=0.0.0.0
enables Neo4j on all network interfaces.
The remainder of that reply is not Neo4j related at all - it's regular networking. Double check if port 7473 (and/or 7474) are not blocked neither be a locally running firewall nor by your router. You local IP 192.168.0.14 indicates you're behind a router doing NAT. Therefore you have to setup a port forwarding in your router for the ports mentioned above.
Please be aware that this is potentially dangerous since everyone knowing your external IP can access your Neo4j instance. Consider using either https://github.com/neo4j-contrib/authentication-extension or use a VPN in favour of port forwarding.
in 3.0:
##### To have HTTP accept non-local connections, uncomment this line
dbms.connector.http.address=0.0.0.0:7474
Confused myself with the setting. Anyone who has the same problem, 0.0.0.0 just means “this server isn’t local any more” and so to access it you use the public IP address of the computer that’s hosting the Neo4j server.
Just make sure that the ports you set in the server properties (default are 7474 and 7473) are open for incoming connections on your router/firewall etc.
I think there's some confusion here. That configuration property org.neo4j.server.webserver.address is about which IP address the server you're starting listens on for external connections. Relevant documentation is here.
It seems you're asking how to configure your database to talk to a remote database. I don't think you can do that. Rather, by editing that file you're planning on running a database on the host where that file is. Your local database on that host will write files to wherever the org.neo4j.server.database.location configuration parameter points.
A remote connection is something that the neo4j shell might establish, or that you browser might make to a foreign server running neo4j; but you don't establish that sort of remote connection by editing that file. Hopefully this helps.
Also if you have ssh access to remote server with neo4j you can setup ssh tunnel to access it via localhost:
ssh -NfL localhost:7474:localhost:7474 -L localhost:7687:localhost:7687 yourname#yourhost
then type in browser:
localhost:7474
Depends on the version.
Look for the phrase 'non-local connections' in the conf file.(In my case, $NEO4J_HOME/conf/neo4j.conf)
Then follow the instructions in the comments.
In my case,
# With default configuration Neo4j only accepts local connections.
# To accept non-local connections, uncomment this line:
server.default_listen_address=0.0.0.0
anybody work on Remote Monitoring in java (JMX).
I have to monitor Remote Tomcat instance on Linux system and i need to monitor on local window machine.
i am accessing Remote Tomcat using Putty through VPN.
Please help..
I have tried by give jmx port in catalina.sh file of tomcat with variable JAVA_OPT and further tunneling in Putty ,but i m not able to access via localhost with port ,
also by using service jmx command.
please help !!!
Thanks for your time and support in advance ..
Remote JMX needs two ports to operate properly. And the second one (the RMI registry port) is by default picked randomly causing problems with firewalls etc.
Since JDK7u4 you can use
-Dcom.sun.management.jmxremote.rmi.port=<port>
to set the RMI port to be used.
See this blog for more detailed steps.