I have a project in Delphi7. Its is rather large consisting of 40 odd forms and frames.
Recently, the compiler only allows me to compile the project once so i can run it, then every re-compile the IDE hangs and i have to end the Delphi process. Before this occurs, my CPU goes to 50% (on dual core machine) so my deduction is the compilation process has gone into an infinite loop. The Executable it produces is not runnable and usually at a fixed size after it hangs.
I was wondering how i can go about finding where this inconsistency in my project is. Other projects do not suffer from this same issue.
You can use Process Explorer to discover what compiler is doing (reading a file, or ...).
Check the QC 3807 issue.
Check the system resources - free disk space, memory. Clean the temp folder. Check the disk for errors. Do you have antivirus running ? If yes, then try to turn it off.
Use "process of elimination", to see if it's something in your code.
First, make a backup of where you are, or save to your CVS (you ARE using version control, right? RIGHT? good.) Revert your branch to an earlier version where it worked. See if that works. If so, merge half of the changes from the present-day version. If that works, try the other half. Keep cutting things in half, and you'll find the code that causes the problem, by process of elimination.
Or, it may turn out to be something in the configuration. Carbonite may be your friend here.
You can either:
Enable "Compilation progress display" in the "Environment Options" window, in the "Preferences" tab.
Use the command line compiler bcc32.exe to have a detailed console output.
Both will let you know which file is hanging the compiler.
Take a look at the great Delphi Speed Up tool, which allows e.g. to abort CodeCompletion and HelpInsight by ESC/mouse move.
Related
It seems like over time Embarcadero RAD Studio (I use XE4 Starter for programming Delphi) has gotten more and more sluggish. I know with other IDE's I've used sometimes you end up with bloat and detritus of temp files and cache files and other unneeded things the IDE generates, and periodically it can help to manually go in and clean those things up.
Are there any particular file removal, or other IDE maintenance a programmer should do periodically to keep RAD Studio running smoothly at peak efficiency?
There are really many angles to how the IDE performance is affected. And there's essentially two levels to look at it on: What's installed in the IDE, and what's required by your immediate project.
IDE Maintenance
There's not necessarily anything you should have to do on a regular basis to your IDE. However, you should make sure that your library path is up-to-date. This is one of the most common things I ever need to manage in the IDE.
Then there's the third-party libraries, components, add-ons and fix-packs that you can install onto the IDE. Each one of these has the possibility of slowing things down, so make sure you only have things installed that you actually use.
Project Maintenance
Performance of the IDE isn't usually hindered by maintenance of a project. However, a very large complex project (or project group) may wind up slowing it down. Cleaning of the DCU files of a project shouldn't be necessary on any regular basis, but can often help clean up and forcefully re-compile anything which the IDE may have neglected to keep up to date. I've seen issues which were solved by deleting DCU files and recompiling them. Remember, DCU files are essentially compiled code, and is mostly for the purpose of caching the compilation so that it only needs to compile those units which have changed since the last compilation. So, cleaning up the DCU's will result in the next compilation taking a little longer than usual. Still, not much worth the pain.
Conclusion
There's a batch file I use commonly to clean up unnecessary files in different project folders. That batch file is scripted like below, and simply deletes any temporary files I don't need to keep around. But it's only needed on rare occasions when I'm cleaning up the source, and not really on any schedule.
del *.dcu
del *.dof
del *.dsk
del *.identcache
del *.local
del *.~*
del *.cfg
del *.dsm
del *.rsm
del *.otares
Note that the same or similar can be accomplished by choosing the "Clean" option in the IDE for any given open project.
Edit
You can also accomplish best IDE performance by keeping track of how your project interacts with the IDE. For example, components or controls which perform heavy actions (such as database connections with data aware controls).
OP hasn't characterized the nature of HOW the IDE "has gotten more and more sluggish," so anything anybody says here is little more than random speculation.
First off, I've never used the Starter Edition of Delphi. Aside from that, I've never noticed any particular slow-down on different versions, other than what you'd expect from normal stuff. That is, if you load bigger files, it can take longer to do stuff in the IDE. More installed libs and components take longer to load at startup, but impose negligible impact inside the designer. Deleting files like those above can slow down builds because the compiler needs to reproduce them; but if you're not using that project, then there shouldn't be any impact whether they're present or not. And poorly designed components can take a toll on IDE performance.
It's entirely possible there may be some optimizations turned off in the Starter Edition, or things missing that might result in performance hits over time. It's not as "feature complete" as the full IDE, although I've never investigated the differences. I just stick to full released products because I use them for production work.
Also, maybe it's time you upgraded your computer. You could be dealing with limitations in virtual and physical memory that have nothing to do with Delphi, which is a rather large app in its own right. I run Delphi inside of a VMWare VM on a MacBook Pro, and it works fine unless the memory gets tight, then it can slow way down. (Again, without more specifics, it could really be tons of different things.)
I have successfully registered an IDE notifier (IOTAIDENotifier80) so I get AfterCompile notifications.
Is it possible to find out whether the project was built versus just being compiled/made?
I've found this answer about implementing a IOTAProjectCompileNotifier but this is not available in D2007.
Any other way? I'd be fine with an undocumented way as this is for an inhouse expert only.
Update: I need this to replicate the "AutoInc build number" feature with an external .rc file containing the version info resource. Maybe this can be done via BuildEvents? Although I like the ability to log a message in the IDE showing the updated version number...
I have no idea about writing experts or hooking into the IDE, and I'm scared of trampolines. Having said that, I've noticed that you can tell the difference between a compile and build by monitoring the timestamps of the files in your project output folder, but this difference is only evident if no code (*.pas or *.dfm) has changed since last compile or build. In other words, when there is a code change, you can NOT tell the difference by monitoring the timestamps. However, when there is no code change since last compile or build, a compile will only change the timestamp of the exe (the dcu timestamps are not changed).
Therefore, in the absence of other more elegant solutions, and only if you are really desperate for this information (ie, was it compiled or was it built?) then I can suggest a 2-part solution for you.
Part 1. Write a process to monitor changes in timestamps in your output folder, and
Part 2. Tell your fellow developers there is a bug in D2007 which complicates your build process, but that this bug is easily overcome by simply compiling twice or building twice (or if you know how to automate this then go for your life). If you can get your developers to compile twice or build twice then upon the second compile or build you will be able to deduce whether it was a compile or build by testing if the timestamp of the dcu changed upon the second compile or build.
Now, I will go and stand in the naughty corner and ask myself "why me?". Cheers.
My Delphi installation has been going downhill for the past few months. It seems though that every so often when I build a release it has strange errors in it which are resolved if I build, then compile, then build, compile, etc.
I've talked to another developer who thinks that this is a compiler error. This sort of degrading performance over time has happened on other computers to us too.
What does stack overflow think could be the problem.
What I've seen most is a case where multiple versions of the same units/dcus exist in different folders/paths, and depending on almost insignificant variations the compiler/linker uses a different path and picks different versions of the units to build the exe.
I would make a huge Spring clean-up, scrutinize the lib/search paths, remove all dcus and make sure there is no duplicate versions of any unit.
And, agreed, reinstalling Delphi could help start with a clean state.
I agree with #François about the DCUs, but also want to point out an observation: sometimes it matters what was built prior to what you're building. i.e. if you have several projects that contain source code that results in various .dcu/bpl files being created in a common directory, but the project that you're concerned with doesn't explicitly call for them to be rebuilt, then you're going to end up with whatever is there. If you clear the dcus/dcps prior to building, and then find that your project doesn't build, then you are missing a uses/requires clause somewhere. Every project shoudl be able to build on a "clean slate", and not rely on leftover binaries.
That's not much to go on, but it sounds like a classic case of "bit rot". Too many things interacting in too many ways for too much time under a poorly-designed OS, leading to strange forms of data corruption.
First thing I'd do is uninstall Delphi and reinstall. If that doesn't work, try reinstalling Windows. (If it's been around long enough for this to be happening, you're probably due for an OS reinstall anyway.) And if that doesn't work, contact Embarcadero tech support.
I'm working on a large delphi 6 project with quite a lot of dependancies. It takes several minutes to compile the whole project. The recompilation after a few changes is sometimes much more longer so that it is quicker to terminate Delphi, erase all dcu files and recompile everything.
Does anyone know a way to identify, what makes the compiler slower and slower? Any tips how to organize the code to improve compiler performance?
I have already tried following things:
Explicitly include most of the units in the dpr instead of relying on the search path: It didn't improve anything.
Use the command line compiler dcc32: it isn't faster.
Try to see what the compiler does (using ProcessExplorer from SysInternals): apparently it runs most of the time a function called 'KibitzGetOverloads'. But I can't do anything with this information...
EDIT, Summary of the answers until now:
The answer that worked best in my case:
The function "Clean unused units references" from cnpack. It almost automatically cleaned more than 1000 references, making a "cold" compilation about twice faster. ("cold" compilation = erase all dcu files before compiling). It gets the reference list from the compiler. So if you have some {$IFDEF } check that all your configurations still compile.
The next thing I would like to try:
Refactoring the unit references manually (eventually using an abstract class)
but it is much more work, since I first need to identify where the problems are. Some tools that might help:
GExperts adds a project dependencies browser to the delphi IDE (but unfortunately it can not show the size of each branch)
Delphi Unit Dependency Viewer V1.0 do about the same thing but without Delphi. It can calculate some simple statistics (Which units is the most referenced, ...)
Icarus which is referenced on a link in one of the answer.
Things that didn't change anything in my case:
Putting every files from my program and all components in one folder without subfolders.
Defragmenting the disk (I tried with a ramdisk)
Using a ramdisk for the code source and output folders.
Turning off the live scanning antivirus
Listing all the units in the dpr file instead of relying on the search path.
Using the command line compiler dcc32 or ecc32.
Things that didn't apply to my case:
Avoiding having dependencies on network shares.
Using DelphiSpeedUp, because I already had it.
Using a single folder for all dcu (I always do it)
Things that I didn't try:
Upgrading to another Delphi version.
Using dcc32speed.exe
Using a solid-state drive (I didn't tried it, but I tried with a ramdisk where I put all the source code. But maybe I should have installed delphi on the ramdisk too)
Some things that could slow down the compiler
Redundant units in your uses clause. See this question for a link to CnPack.
Not explicitly adding units to your project file. You've already seem to have covered that.
Changed compiler settings, most notably include TDD32 info.
Try to get rid of unused units in your uses clause and see if it makes a difference.
using Delphi 7 and 2009, last week I pass from almost 2 minutes for compiling and another 45 seconds from hitting f9 and get the main form of my app to 20 seconds compiling and running. This things has drive me crazy for about 6 months and nothing I tried seems to work. Using filemon from SysInternals, I realize than every unit (mostly components) that compiler requires was searched in every folder that was in Search Path, yes, this produce a LOT of FileOpen, FileExists and FileNotFound, etc. What I do was, put every DCU, DFM, RES, etc from components all in a single folder, and having just this folder in the search path, and a couple of others folders required by the project; the results were amazing. Other problem prior to the fix, was debugging. It takes almos 40 seconds in each F7, F8 key press while debuging, this has been fixed too. Hope this info can help you. Greetings form Isla de Margarita, Venezuela. Excuse my english, if any error ;)
Check are there any paths in search paths that aren't on your local machine.
i.e. Don't link to binaries on network shares, and check that the search path isn't checking any network shares.
I haven't seen the compiler get slower over time, but it's been a long time since we used Delphi 6.
It seems to be generally agreed upon in the Delphi community that, if you don't want to upgrade to the latest and greatest (Delphi 2007 or 2009), then Delphi 7 is the best/fastest/most stable. You might consider upgrading.
KibitzGetOverloads sounds like something from the kibitz compiler -- the "background" compiler that gives you code-completion, background error highlighting, code tooltips, etc. Sounds like you'd be better off checking the call stack of the command-line compiler, not the IDE; you'd get something more helpful.
I have never found compiles to be faster after deleting the DCUs. DCUs are there to make the build incremental, therefore faster. If you're seeing faster compiles after deleting all DCUs, check your hardware. Have you defragged your hard disk lately? How much free space do you have on the drive?
Have you set a single folder to get the DCUs. If not, they will be scattered all over.
Put all the units and their implicitly called units (except installed components from Library path) in the dpr. To be sure you did not miss some, empty your search path, it still should compile.
After reducing the search path, you can try to reduce your library path by installing your components into fewer folders.
Although only partly relevant to your exact question, I hear that the use of a solid-state drive is vastly increasing compile time with Delphi - Nick Hodges said this himself on the Delphi Podcast a couple of week ago.
Brian
U can automatically get rid of
unnecesseary unit references, which is very efficient optimization for compiling speed.
In your situation, dividing your
project into packages can improve
compiling speed. With this way, it
just generates modified package(s),
not single massive binary for each
recompilation. Working with packages
can also help about easy deployment
of your project updates.
Turn off your live scanning antivirus
We had the same (or similar) problem.
I of our package has compilation Time about 12 min.
After changes, now we have moved to 32 sg.
After many tests we found that the "problematic situation" was the following:
In a single package:
The A unit uses a large number of units: U1, U2, U3, U4, ... U100 (Uses of Interface) in the same package. This is an important unit that centralizes all the initialization work.
All units of the package, U1, U2, U3, .., U100 uses unit A (use of implementation)
This "circular reference" does not give compilation errors because the USES are different, but caused a large compile-time.
SOLUTION:
Eliminate the reference to each unit, U1, U2, U3 ,...., U100 in the A Unit.
Now, A unit use a large number of units: U1, U2 ,...., U100, but the units U1, U2 ,..., U100, does not use the unit A.
After this change the compile-time is down drastically.
If you have a similar situation, you can try this.
Excuse for my bad english.
Greetings.
Neftalí -Germán Estévez-
I had the same problem and I can come up with (2) reasons it effected me.
Circular references. The gentleman who stated that one was correct. I would have certain LARGE projects that would compile fast, and SMALL projects that compiled slow. Could not figure it out until I restructured the code and then I got the faster compile speeds. Lots of small units. It's easy to build monolithic units. But, there are many penalties from it.
I've heard it a 1000 times, develop on a slow machine like your users might be using. Hey, that's for the testing department. I can't waste time with compiling, Delphi load speeds, packages, etc. I went out and bought a "GAMERS" computer (WOW) with the Solid State Drives (as mentioned earlier), 12GB RAM, OVERCLOCKED "i7" Intel chip, triple video cards (linked), all on Vista64 (Vista is not bad once it is finally running with all installed parts). It was a real pain to get it all set up. But, I am not waiting anymore on my computer. Pure compile speed, load speed, plus a new fresh machine without all of the crap that was installed on the last one over the last 2 years. I even unloaded DelphiSpeedUp. Did not need it. And I don't need to turn off AntiVirus, since I did that one as well, and got penalized with the internet crap. So AntiVirus stays on. Pure and simple, get a BALLS OUT machine. Your time is worth more than what you will spend on a new computer.
Try to install a ram disk and set your dcu output path to point there. This more than halved my compilation time with Delphi 2007 on top of DelphiSpeedUp.
The compiler will only compile units that have changed. If you have changed the code in the interface section all units that depend on the changed unit are compiled. If only code in the implementation section is changed, the compile will only that unit but presumably link all the modules. Implies a good design of interfaces up front but if you restructure the code to restrict changes to the implementation compile times might reduce. I have no idea by how much. This fact is mentioned in the Delphi help files under Multiple and indirect unit references in Delphi 7 "Using Delphi".
Do not compile on network drives. Seek time is dramatically worse.
Consider pointing your dcu ("unit output" directory to a ramdrive.
Limit the number of include/unit directories.
Try to avoid minor circular references that the compiler still accepts, specially for large units (e.g. generated ORM units for your OPF). It might cause large units to be compiled twice. (does Delphi allow minor mutual circulars, or is that a FPC only feature?)
I never tried, but hardcoding all files with full/relative path in the central .dpr might also help (script to regenerate/update?). (you mention that above, but was it with path xx in '\path\yyy' notation?).
Other long shots:
Use Kylix (file/dir I/O under Linux is dramatically better in my experience (though that is from FPC experience)). Maybe we need a reversed cross-kylix :-)
Use a separate (windows) build machine, and tweak NTFS over the registry to be less "safe". (which you don't care for, since everything is a revision system to begin with). Afaik these options can only be done global for all filesystems, hence the separate system. Throw in a raid array or Raptor too.
Forget solid state. Nice buzz atm, but the high write ratio will kill it eventually (both life and performance when it gets fuller and can't optimally allocate anymore), and you need the expensive intel ones to beat two $75 HD's in RAID.
P.s. Sorry for the FPC references. I do both, and I sometimes don't know anymore what belongs to what.
What I do is always make sure to have very few directories in the library path, and most of the components and static code. I also make sure that NO sourcecode is available in the library path, only .dcu/.res etc. Only browsepath has the sourcecode, and special circumstances are handled through searchpath for the project.
Just limit what you compile in any situation.
A few years later I am struggling again with increasing compiling times. I am currently using Delphi XE4 and I am at a point where I absolutely need to refactor the units references. I thought about a new way to identify where are the problems:
I’m using Process Monitor from Microsoft/SysInternals to monitor the compiler:
I start Process Monitor with a filter to show only dcc32.exe
(or bds.exe when working from the IDE).
I build my project from the command line.
At the end I look at the CreateFile operations in the log of Process Monitor.
For each unit there will an entry for the .PAS file (when the compiler starts working on this unit) and one for the .DCU file (when the compiler is complexly done with this unit). By working on the log with a text editor and/or with Excel I can extract this kind of information:
A kind of “tree”, where you recursively see in which order the units have been compiled.
For each unit the delay between “.PAS file opened“ and “.DCU file written”.
Then I try to interpret the results to find places where doing some refactoring would speed the compile time. It is not so easy, but I’m getting some encouraging results.
Our team had been using Delphi 6 for many years, then switched to Delphi 2006 years ago. With both versions we have the following problem: frequently the compiler complains about a unit which is supposedly used recursively. This unit is a 40k LOC unit which is at the core of a project with almost 1 million LOC (third party included).
The error message is incorrect: a full build on the project always works. Unfortunately, the error message does not tell us where the supposed circular reference is, just the name of that unit. Sometimes it even happens that valid error messages are listed 2-4 times until that circular reference problem is "found". Clearly the compiler is running in a circle here. Because of the size of that project it is hard to find the problem manually. Therefore I made a tool which proves that there really is no circular reference (the tool creates a directed dependency graph of the units and determines the coherence components in that graph - there are none except if I deliberately put some in).
This is not only affecting F9 compilation but also code completion / insight which is not working most of the time. Sometimes it works when I press ctrl-space a second time...
Any ideas how we can isolate or even fix the problem? Note that it will be very hard to split the 40k LOC unit into smaller ones because it contains about 15 large classes which depend on each other in the interface section (I know it's bad but should work anyway).
Update
We are constantly refactoring but this is one tough unit to refactor because everything depends on everything, almost. Have been trying to get around it via interfaces but we are talking about some classes with 100s of methods and properties. And it would be slower.
Upgrading to D2009 may be an option down the road but right now we're stuck with D2006 (the unicode stuff and the price tag are two of the stoppers here). Question is anyway if it would help since the problem is in there since D6 at least.
About trimming the uses clauses, we have been doing this frequently with Icarus. But that did not help so far. We are down to 90 custom units in the interface section now. However, with a true circular reference the problem could be in any unit. Also tried to add all units to the dpr.
The project shares a lot of code with other projects, and there are some IFDEFs. However, the defines are not set up in project options but via a common include file. Therefore all modules should see the same defines. Also, the problem reoccurs shortly after a full rebuild without switching to another project.
I will probably be downvoted for this. In D2005 I had a 10k loc unit (datamodule) that flat out stopped compiling. Had to separate out some datasets/code to another datamodule. That 10k unit was and is a mess. You really should consider refactoring out some code to other units. My module has since D2005 / separation grown even worse, but it still compiles in D2007. So my answer is a) refactor and b) upgrade to D2009.
It seems clear that this is due to a slight difference between the background compiler and the real thing. You could look around (QualityCentral) what's known on that topic.
Also, since you didn't explicitly state this, you should remove unnecessary units and move uses statements down to implementation if possible. Maybe your tool could help with this.
And just to be sure you should check the unit aliases and Path settings.
You write that a full build does always succeed, but shortly after the incremental build fails with this error. Assuming that you experience this in the IDE, have you tried to use the command line compiler dcc32 to do incremental builds?
If you don't feed it the "-Q" switch (which probably most Makefiles or scripts for command line builds do) it will output a lot of information what files it compiles in what order. You could either try to do an incremental build after the error appeared in the IDE, or you could keep a command line open next to the IDE and Alt+Tab to it for compilation, skipping compilation in the IDE completely.
I simply assume you have a way to build using dcc32, one way or another - with the size of your project I can't imagine otherwise.
We regularly fall in similar problems, and we never managed (or bothered long enough) to find the precise cause. There seems to be a problem in the order which Delphi chooses to compile the units when hitting Ctrl-F9, which is incompatible with the actual dependency order of the units.
Have you tried deleting "MyBigFatUnit.dcu" before hitting Ctrl-F9?
Have you tried to re-order the declaration of your units in your dpr/dpk files, so that units appear in a correct compilation order? (i.e.: if unit B depends on unit A, unit A should appear first in the dpr/dpk)
Do you have any other projects that use part of the same codebase? If you compile one of them under different compiler settings or IFDEFs, it might change certain things in some of the DCUs which would lead to a circular dependency. A full build rebuilds all DCUs and then the problem goes away.
Try Icarus (free) from Peganza. If that does not tell you what the problem is, try their Pascal Analyzer.
We have this problem as well, also with a fairly large codebase.
We are currently using D2009, but have had this problem with all previous versions of Delphi.
It most frequently happens immediately after doing an update from source control, so I suspect there is some timestamp issue within the Delphi build process.
In our case, if Ctrl-F9 fails and reports the circular reference, a second Ctrl-F9 will generally work
A way I have been told to deal with this is to open another arbitrary file in the project, change that file, save it, and then try running the incremental compile again. Surprisingly enough, this usually works.
We have a 4 MLOC project where this comes up from time to time and this "solution" works for me.
I've fought this before, in my experience the error is quasi-legitimate. It's been a quite a while (the error has nothing to do with the version) but my memory of the situation is that it involves a loop in which part of the loop is in the implementation.
Unit A uses B in the implementation. Unit B uses A in the interface. If you compile B first it calls for A but since the call for B is in the implementation it succeeds. If you compile A first it calls for B, B turns around and calls for A in the interface, boom. Such loops are only safe if both cross references are in the implementation.
The solution is to design things so there is a minimum of stuff used in the interface and to make certain there's nothing resembling a loop in those units. So long as you keep your type definitions separate from units with code this is pretty easy to do.
The error coming and going depending on what you are doing is a hallmark of this issue as it comes down to how you enter the loop. When you do a full build the order is consistent and you either get it 100% or 0%, it's not random.