I have installed MOSS2007 on a server, deplyed the apps, etc. Only to find out that I should have specified a specific locations for the files - not the default C:\Inetpub\wwwroot.
How do I change that? I don't mind reinstalling MOSS, I just don't want to loose all the custom work I did.
Thanks,
Eric
Click Start, and then select Run…
In the Open field enter Regedit and click OK.
Locate the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\InetStp key and modify the PathWWWRoot Value data to D:\Inetpub\vroots.
Locate the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\ContentIndex\Catalogs\Web key and modify the Location Value data to d:\inetpub.
Locate the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\ContentIndex\Catalogs\Web key and modify the Location Value data to d:\inetpub.
Locate the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ContentIndex\Catalogs\Web key and modify the Location Value data to d:\inetpub.
Repeat steps 1 through 6 on each Web front-end and application server.
Regards
Ashutosh Singh
MyBlog
Related
The account is not removed. How can I remove them as a new browser?
enter image description here
I want to reset all data in Ms. Edge Ubuntu as a new version on my desktop. I uninstall and re-install it. But somehow the old data is still there. You can see it in the attachment.
Reinstalling a program wont delete your data stored in the system. Sometimes you need to delete it manually. Microsoft Edge stores its user data in a folder, which can be found in the following location in Ubuntu: ~/.config/Microsoft/Edge . You can delete this folder to remove your data
Run this command to delete all your config files
rm -rf ~/.config/Microsoft/Edge
Method 2
You can also use the browser itself to delete your personal data.This can be done by going to the settings menu and clear the browsing data.
Based on your screenshot, I assume that you wouldn't like to see the "Choose an account" dropdown menu. Actually, it has nothing to do with your old data (or it does not mean "old data" was preserved), but has something to do with the accounts set to be used by other apps. You may find it in your system settings, where you've connected this Gmail account.
delete file(this file contains info about your microsoft account) in this dirrectory:
/.cache/Microsoft/Edge/IdentityCache/OneAuth/accounts
I want to change the homepage in the Edge browser via Registry but it's encrypted and I see (Protected - It is a violation of Windows Policy to modify. See aka.ms/browserpolicy) in Registry. Please help me to edit homepage in Registry or find where it's a violation of Windows policy to modify. See aka.ms/browserpolicy
ProtectedHomepages value is not really encrypted, instead it is an obfuscated buffer which contains homepages strings and the cryptographic hash for these strings. Buffer is obfuscated using the random generated seed which is also stored as a part of the buffer. I have done some reverse engineering research and published the results here.
So, basically, reading and decrypting this value is easier than modifying due to the required crypto-hash. However, reading capability is the only required for anti-malware software. I don't know what reasons you have to modify this value, hopefully you are not writing a piece of malware...
If it is only the homepage in Edge you want to set then change the URL below to your preference and then save this as a .reg file:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppContainer\Storage\microsoft.microsoftedge_8wekyb3d8bbwe\MicrosoftEdge\Main]
"HomeButtonEnabled"=dword:00000001
"HomeButtonPage"="https://www.google.com/"
Currently it is not possible to change the startpage of Microsoft Edge writing string or binary value into the registry. The entry to change is "Protected - It is a violation of Windows Policy to modify. See aka.ms/browserpolicy" -> Value "ProtectedHomepages". The value is a encrypted binary value, in which the current homepage is not readable.
When you have to set a specific homepage more than one time and you want to do it with C# here a Workaround:
Set the startpage you want via UI of the Microsoft Edge browser. After Change of it restart the browser and export the registrykey named above. Open the exported file and copy the binary data into a string constant or resource in your C# Solution. In the function to write this Setting you can copy the string into a byte-Array and than writing as binary value into the registry. This entry has effect after restart of Microsoft Edge.
The same way you should use also when you want to Change the Default Search Provider. But in this case in addition to the value "ProtectedSearchScopes" one more registrykey is to use -> "OpenSearch". This key does/should exists by third Party search Providers only. This key should be deleted or does not exist if the search Provider is Bing.
Disable your computer's network interface
Launch MS Edge. The recovery page will error out
Open a new MS Edge tab
Close the MS Edge tab containing the error message
Close MS Edge
Enable your computer's network interface
Launch MS Edge
Also...
Some malware will change the Edge homepage. You can see the malicious URL in address bar, record it.
Kill Edge with Task Manager or reboot.
Edit your hosts file in c:\windows\system32\drivers\etc, from an Administrative command prompt go to that directory and type notepad hosts and hit Enter.
Add a host entry like this
127.0.0.1 bad.url (substitute the URL you recorded above for bad.url)
Save the hosts file then open Edge. This method is helpful when you are remoted in and cannot disconnect the network connection.
No need to do it in registry. You can now change the homepage via the settings in Microsoft Edge
How do I get a folder to appear in the browser after adding it to \pentaho-solutions in Pentaho 5.0.1 CE. The documentation I read does not seem to work with this new version.
1. Create a new directory in /pentaho/server/biserver-ee/pentaho-solutions/.
Use underscores instead of spaces in the solution directory name. Ensure that the directory has the appropriate user
and group ownership to be writable from the BI Platform.
2. Using an XML-aware text editor (or Design Studio), create a file named index.xmlin your new solution directory.
3. Copy the following text into the index.xml file, changing the content accordingly:
***<index>
<name>Example Solution</name>
<description>This solution contains examples I created while learning to
work with action sequences.</description>
<icon></icon>
<visible>true</visible>
<display-type>icons</display-type>
</index>***
4. Save the file and close the text editor.
5. Log into the Pentaho User Console as an administrator.
6. Refresh the solution repository cache by going to the Toolsmenu, then selecting the Refreshsubmenu, then
clicking on Repository Cache.
You now have a new solution directory. It will show up in all file dialogues in the Pentaho User Console as well as the
Solution Browser in the left pane.
Every time you add or edit an action sequence to your solution directory, you must refresh the repository cache as
explained above. Each user currently logged into the Pentaho User Console must also refresh their session cache; this
is best done by re-logging into the Pentaho User Console.
I am using Pentaho design studio to develop an xaction sequence script. I followed this procedure:
1. In Design Studio, go to the Filemenu, then select New, and click on Other...in the sub-menu.
The Newwindow will appear.
2. In the Newwindow, click the triangle next to Pentaho, select New Action Sequence Wizard, then click Next.
3. In the File namefield, type hello_world.xaction.
4. Select Hello Worldfrom the Templatedrop-down box, then click Finish.
The wizard will generate the new file and bring you back to the workbench.
5. Click on HelloWorldComponentin the Process Actionssection on the left.
The right side of the screen will change to show the options available for this action: Nameand Message. The
Name field controls the name of the component in the Process Actions list on the left; it doesn't do anything else of
note. The Message field contains the text that will appear on the screen when the action sequence is run. It is prepopulated with %quote, which is a token that represents a quote message in a nonexistent properties file. Pentaho
used to provide properties files for each example, but they have been removed from the standard Pentaho Business
Analytics distribution.
6. Replace the %quotewith a sufficiently inspiring message.
Alternatively, you could create a hello_world.propertiesfile and populate it with the appropriate messages and
tokens, but that has no advantage unless you intend to internationalize this action sequence.
7. Save the file.
You now have a working action sequence that prints a short text message: "Hello, World." plus whatever you typed into
the Message field. The first part of the message is determined by a message bundle packaged with the Pentaho Web
application archive.
To test the action sequence, use the Test tab if you are on Windows or OS X, or log into the Pentaho User Console and
run it from the Solution Browser.
Running the sample xaction fails with
Sorry. We really did try.
Something went wrong. Please try again
or contact your administrator.
I figure this is because pentaho cannot locate the xaction file as specified in the file path when I generate the url from within design studio. The folder I created within the solution directory does not appear in the browser directory list despite refreshing the cache. Any help?
With Version 5 the files and folders are no longer stored in "/pentaho/server/biserver-ee/pentaho-solutions/..."
It is stored now in a jackrabbit repository.
You can create folders and upload files in the user console.
I did mistake after starting biserver 5.2. Unexpectedly i deleted Public folder after configuring to jackrabbit. Now how do i create the folder so that i can see Public and Home Folders.
Sorry for getting back to this question some time later, just in case someone searches something related to Pentaho repositories management with no success, i hope this information can help.
Just to make things more clear, i'm using version 5.2.x and i'm supposing you want to create a new folder on the root directory of Browse Files screen, something that is not allowed on Pentaho5 CE Web Console.
The answers about repository management based on JackRabbit are correct, so the old way we used to configure new "solutions" folders doesn't work anymore. From version 5 on, Pentaho exposes an interesting REST api that allows you doing things not allowed in web console.
For instance, for creating a folder in root directory you should create a http REST PUT request against Pentaho Server (using tools like curl or if you appreciate Google Chrome, something like Advanced Rest Client, etc.) using the following URL:
http://localhost:8080/pentaho/api/repo/dirs/:new_directory_name?userid=admin&password=password
Pentaho repository directory REST api is documented here:
http://javadoc.pentaho.com/bi-platform500/webservice500/resource_DirectoryResource.html
It's worthy to spend some time reading REST API the documentation.
I developed a site for a client before a domain name was chosen. As a result, the URLs for the site pages look like:
http://host.mynost.net/~tempname/index.php?id=8
A domain name has now been purchased but if I click on any Wayfinder links it still uses the old path as above instead of, say:
http://domainname.com/index.php?id=8
I assume this is configured in the config.inc.php file, but I am unsure of what to change.
Can anyone point me in the right direction? Thanks!
You need to change $modx_base_url= '/' in /core/config/config.inc.php and if that is not enough - manually clean /core/cache/ folder.
Four years later, I've dealt with the same thing for a few months, and was incredibly frustrated.
An updated answer to this issue would be navigating to Settings (icon) > Context, then choosing Key > web (right click) > Update Context > Context Settings.
Change http_host (ex. localhost) and site_url (ex. http://localhost/).
Now, from the top menu Manage > Clear Cache as well as Manage > Clear Cache > Refresh URIs.
It was like finding a pot of gold.
I have a web on some super-old Modx version which I needed to temporarily set up for viewing, and I ran into this issue.
The way I changed the base URL is in the database:
table: modx_context_setting
key: site_url
This outlines how to move modx to a new location ~ which is essentially what you have done.
http://rtfm.modx.com/display/revolution20/Moving+Your+Site+to+a+New+Server
genereally you can get away with updating the config.inc.php & clearing the cache, but it's a good idea to go through the system setting table in the db looking for old paths, some packages do store path info in there.
Can I open the ads_err table from a windows service?
Yes. You should be able to open it just like any other table. You don't mention what development environment (client type) you are using, so I am not able to give more details specific to your situation.
After you have a connection to the server, all that is necessary is to supply the full path to the error log. If you don't want to hard code the path (probably desirable to avoid that), you can retrieve it with sp_mgGetConfigInfo(). The Error Log Path field is the one you would want.
You could also read the error log with SQL by including the path. For example, select * from [c:\ads_err].