What do I need to get from a webhoster if I want to host my own Diaspora* seed? Do I just need some webspace with ruby on rails capabilities? I suppose it uses Ruby On Rails SOAP for communication between seeds? If so what is needed for this?
According to the README on GitHub, you need Ruby, MongoDB, OpenSSL, ImageMagick, Git, RubyGems, and Bundler... so any decent shared hosting that allows you to build things in your homedir and run custom long-running processes should do the trick.
(Decent because the non-decent ones may omit Git or ImageMagick and not give you the resources to install them yourself. Long-running processes for MongoDB and the Diaspora app server.)
WebFaction, for example, should meet those needs but Dreamhost may not unless the Diaspora app server can somehow be managed by FastCGI to work around their long-running process killer. (Dreamhost apparently supports MongoDB, so that would be exempt from the killer)
Seriously though, I'd recommend waiting. Diaspora was just released. It's still in development and, if anything, probably best to be experimented with on your home PC for at least a few more months.
In general you need a server which allows you to run background processes, as diaspora* uses Sidekiq to process background jobs.
Any VPS Linux server for example with a recommended minimum 1GB should do fine for a small user base.
See: https://wiki.diasporafoundation.org/FAQ_for_pod_maintainers#What_are_the_general_system_requirements.3F
Related
is it possible to deploy a rails project to a remote server using FileZilla ? the server is running nginx/1.4.6 (ubuntu)
if no what is the best way to deploy the project if there is already a running version !
To answer your question yes, the code needs to be up, so FTP should do the trick. You might need to restart nginx to pick up the changes, usually touching a restart.txt is enough, but that's particular to your setup.
Is this the best way? Possibly not!
Others suggested capistrano and that would be a good fit for a server you maintain, or go Heroku (or similar) service for a simpler setup.
Deploying a Rails app is a tough job. There is always the easy way (heroku) however shared servers don't deal well with rails. Theoretically you can but usually this shared servers have really outdated ruby and rails versions and are absolutely useless. And you can try to connect via ssh and try to update it but i doubt you will be able to do that. So... If you are a rails developer i can suggest.
1- For small apps run Heroku (easy and free) however cost grows like hell with the app's growth
2- If you're thinking about developing big apps get a dedicated server (you can get cheap ones for 5€/month) and configure it as u would for your computer except when you run rails you run it in production.
3- Trust me... i fought enough Rails and shared servers and i quit... I just gave up
I'm new to rails have been searching for deployment guides on the web - it's quite fragmented. I see some which recommend deploying as a sudo enabled user. I was thinking you would create a user with no sudo powers to run the app for security reasons. It would need it's own home directory for RVM and bundler but having sudo powers seems redundant and a security risk. I'm doing this all manually as it's a tricky beta level application and deploying it is not yet straightforward, so capistrano would only be a layer of obfuscation at this point.
I'm using thin as the server with Nginx as the proxy and redis and Postgres as the database. Clockwork and sidekiq as well.
Capistrano seems like a lot of work even for a small project but it's worth getting setup anyway if you have hopes of the application growing (and thus the complexity of deployment increasing).
I personally like the idea of separating the distribution specific Ruby available (and gems) to an RVM deployment specific to the application. Furthermore, requiring bundler to manage gem dependencies and ensuring compliance is invaluable. I wouldn't suggest enabling sudo for that user; it'll expose the whole stack from HTTP requests to root level OS control. Applications shouldn't require administrative access, deployment scripts might.
If you're new to Rails I'd recommend something simple for your first deployment. Heroku allows you to deploy apps by simply doing a git push to their repository. They handle all the steps necessary to make your app available on the Internet. Best of all it's free as long as you don't need heavy resources.
EngineYard is another hosting solution that's easy to deploy to and step up from Heroku in terms of flexibility (and cost).
Once you're comfortable with deploying production apps then you can look to using your own servers and using capistrano for the ultimate in customization.
I have production websites running in both environments and I've yet to need to go to the trouble of migrating to my own hosted server.
I apologize in advance for the fairly simple question.
I am familiar with PHP, but am trying to install this Ruby script on my server for the first time. It's an open source script that I've forked from github, but unfortunately does not have any instructions. I have Ruby on Rails, and MongoDB installed already.
Does anyone know what the beginner steps are to get started? Should I upload everything via FTP to the public directory, or is there something else to this?
Most Rails projects are much better served by having a proper deployment strategy. Typically this involves making your own repository, easily done by forking that existing application, and cloning that on to your server using git. To make changes in the future, do your work on a development copy, push that into the repository, and pull down the changes on the server.
Unlike PHP where many parts of the application can function independently, Rails applications tend to be far more integrated and uploading it piece by piece is not going to work in the long run.
Rails applications can run stand-alone using the provided rails server tool but this is really only intended for light-duty testing or development work. A more permanent solution is to use something like Passenger to do the hosting for you.
Passenger will take care of launching your application when calls are made to the site you've configured in Apache or nginx, depending on which you end up using. Passenger is popular because it's quite easy to get running.
There are other approaches like unicorn if you're feeling more adventurous.
When you make changes to your Rails application in production mode you will have to create a tmp/restart.txt file in the main application directory to tell your web server to restart the process. This is not a requirement in development mode.
Due to the relative complexity of this process once you include all the various steps, you will probably want to use a deployment automation tool like capistrano.
A few years ago it seemed fairly tricky to get a rails application deployed. However, from what I have been reading recently it seems that rails has improved much in this area. However, given the various versions of Ruby and gem dependency issues, is deployment still a headache (to heroku or engine yard, for example)?
No. Heroku makes deployment ridiculously easy: it's entirely managed by Git, your app is isolated so there are no dependency conflicts, and it's free for small scale apps. Other services like EngineYard and DotCloud offer similar service (although EY isn't cheap and DotCloud isn't as ruby-focused).
There are a bunch of tools to make deployment and management easier for you.
Heroku
Heroku is totally managed by git via the heroku gem. Essentially, you call heroku push instead of git push and your changes get pushed to the server, built, and your site is automatically updated
Bundler
Bundler has made managing gems a lot easier, and it is super straightforward.
RVM
RVM is actually a good tool to use on servers. It allows you to have one server serve multiple Rails applications, each on a different version of Ruby, with it's own totally unique Gemset (This means that you won't have gem conflicts for multiple apps using the same ruby version. Gem conflicts are gone!).
Capistrano
Capistrano lets you define everything you need to happen during deployment, and allows you to start and end it all with one simple command - cap deploy. It greatly simplifies the deployment process.
Foreman
If your application requires multiple services to start (Server, Delayed::Job, Sphinx, etc), Foreman is the tool for you. It lets you define what services you need, and start them all at once by calling foreman start. It works nicely with Capistrano, and makes the console output of your services nice and easy to read.
Overall, I'd say that the state of Rails deployment is an order of magnitude better than it was a few years ago, but there's always room for improvement. The projects mentioned above are a good start, and it's just a matter of finding what fits your organization best.
Deployment might be a headache depending on your needs. If you're running a single application in a server, it's easy to build it, install ruby and setup your deployment environment using Capistrano (here's a sample of how to do it using Nginx and Unicorn).
If, on the other end, you require many different applications on your server (possibly running on different rubies and groups of gems), you'll have more work but it's completely possible. To have many different rubies installed at the same time without conflicting with each other you'll use RVM and to make sure all your app dependencies are defined, your Rails app has to use Bundler (or maybe something else that does the same).
So, your requirements are going to make it simpler or not, but is isn't really impossible and it won't drive anyone crazy with the amount and quality of tools available for the job.
I admit that I don't follow much of anything "right" on deploying test versus production code. I have been using ASP.NET, and I typically run it locally in Visual Studio, it works, I upload it, I test it again on the production server.
I have read several people say that deploying Rails apps is harder and there are special programs/ways on the ruby site about deploying RoR. I've only toyed with RoR. What is special about deployment? You don't just copy and paste the code and run it (from development machine to the production)? Is it because one is in Apache and the other running on the built in server?
This will be on a Mac Server if it matters.
Deploying RoR is not difficult anymore, especially with Phusion Passenger.
What is somewhat difficult, is getting a automated production environment setup with capistrano, vlad, etc. If you don't mind simply copying your code to the server, you can do that just fine. Most people choose not to do it that way because you lose out on a lot of the benefits that the automated deployment tools give you.
I guess people consider a Rails app harder to deploy than say some PHP apps or such where you just plop the code somewhere and point Apache or whatever at it. But, as mentioned above, you could do that now with Phusion Passenger.
We use Nginx+Passenger, but not for simplicity of deployment. Capistrano is our deploy tool of choice, and really, unless you have a very simple app, you're going to want something like Capistrano anyway. For example, with our deploy, we do a slew of things:
run any database migrations
generate release notes automatically, based on all the commits to Git between the last deploy and this one
notify various people via email (with differing lists depending on whether the deploy is to our staging environment or production) - we do this via cap_gun which integrates with Capistrano.
Notify New Relic RPM of the deploy so it can mark it in our RPM analysis
Notify Hoptoad of the deploy, so it too can have that data when reporting any exceptions
produce our sitemap.xml file, and ping Google to tell them there's a new one
update crontab files (I store our crontab files for each server in our git repo, and then on deploy it sees if there is a new version and updates accordingly, etc.).
flush/restart memcached
There are other ways aside from Capistrano, but it's a proven tool, with a lot of flexibility, yet pretty simple to setup a vanilla configuration.
So, my take is that once you get into any app that is beyond just the very simplest of apps, you're going to need/want to be doing things other than just simply updating the code. In the beginning though, if you just need the code updates, and maybe Rails migrations, then you can do simpler things like Passenger and code sync, or look at tools like Heroku or Engine Yard's stuff where they do a deploy by doing a Git clone (and then offer some additional abilities).
Another super easy way to deploy is with http://heroku.com/
Some of the issues you face with deploying rails to production:
Database connection.
You need to be sure that the database connector is set up for the production environment.
Database migrations.
You have to run database migrations against the production database even though you may have already run them in production/testing/staging
Ruby version. The version or sub-version or Ruby can trip you up, e.g. An error occurred while installing debugger-linecache (1.1.1), and Bundler cannot continue
Gem dependency.
Your production environment may have different packages and gems from development. Bundler will figure this out for the most part and install the dependencies but occasionally there are still issues that you have to resolve manually.
Dependencies.
Some gems on some machine have particular dependencies. I have seen frequent problems with using gems on my unix box that work on OSX and vice-versa.
Note the last 3 shouldn't affect you if on the same machine but I included them based on the title and to be comprehensive.
It's not especially hard. If you stick to conventions then with a little bit of configuration it boils down to this:
cap deploy
...however there is sometimes a bit of effort needed up front to get the workflow in place.
The good news is that lots of people have packaged up solutions and stacks for RoR that you can just plug and play. For example, google ec2onrails - this is a packaged Ubuntu image and set of capistrano tasks for running rails apps in Amazon's EC2 cloud, with lots of common stuff set up already out of the box.
Choose a good hosting provider and you should be able to find something similar for that also.
An easy way to deploy Rails apps is to use Phusion Passenger. Deployment doesn't get much easier than that for any programming language or framework. You can do that on a Mac server.
Another really easy way to deploy rails is with jruby and the glassfish gem.