i'm using delphi 7 to run the hiercube version 4.32. When i retrieve the data, the pc memory keep increasing until occur 'Out of Memory' bug. I suspect the cache of memory did not clear when retrieve the data from hiercube, so when i retrieve data for 2nd or third times then it occur 'Out of Memory' error. Any idea to solve this 'Out of Memory' problem?
The obvious fix (work-around?) is to get more RAM. 1 GB is a bit on the low side these days, especially when 4 GB is at around the $100 mark.
Use FastMM as your memory manager, then either (or both):
make it report memory leaks on shutdown
use the memory monitor example form at run-time
Then start investigating the memory leak.
--jeroen
Related
My Delphi6 program crashes because the TotalAddrSpace (THeapStatus) at some point hits the 2GB level, upon which it crashes. I have been able to increase the limit the 4GB level (using {$SetPEFlags $20}), but that only delays the eventual crash.
The problem is that the TotalUncommitted memory keeps increasing for some reason, while the TotalCommitted memory and also the TotalAllocated memory nicely stabilize at an acceptable level (about 550 MB).
I cannot quite figure out WHY the TotalUncommitted memory keeps increasing and eventually makes the TotalAddrSpace hit the 2GB (now: 4GB) level and the program crashes.
In the program I use many dynamic arrays, whose length I increase or reduce regularly with a simple adjustment via the SetLength command. Does this regular increasing/decreasing of dynamic arrays in this way effectively lead to an increase-beyond-bounds of the TotalUncommitted memory?
Any advice or insight is very much appreciated.
Also if you know of a general mechanism to somehow actively decrease the TotalUncommitted memory ...
Thanks for all help!!
My problem turned out to be one of Heap Fragmentation (or my understanding of it).
I used Setlength to increase/decrease, upon need, a dynamic array always in steps of 5 positions. Given the size of each array element, this apparently lead the OS to reserve much more memory than actually needed, which made the Heap.TotalUncommited grow without bounds, as did the Heap. TotalAddrSpace.
I tried different step sizes to see the impact. With a somewhat bigger step size the problem vanished.
I most strongly suggest you run a special build that has MemCheck included. It's a really great tool to detect memory leaks in your application. More modern Delphi versions have some of this built in (in part thanks to FastMem), but this one has been around since the first Delphi versions and works great on versions 5,6,7.
i using reportviewer v.10.0.0.0, runtime v2.0.50727. when i fill about 1 million records, memory being up to 2G or than.
It very bad, and if you know solution how to fix it, pls tell me know.
May be it's just that it's not designed well. E.g. there would be large object heap fragmentation.
GCSettings.LargeObjectHeapCompactionMode
This is a follow-up to this question: What could explain the difference in memory usage reported by FastMM or GetProcessMemoryInfo?
My Delphi XE application is using a very large amount of memory which sometimes lead to an out of memory exception. I'm trying to understand why and what is causing this memory usage and while FastMM is reporting low memory usage, when requesting for TProcessMemoryCounters.PageFileUsage I can clearly see that a lot of memory is used by the application.
I would like to understand what is causing this problem and would like some advise on how to handle it:
Is there a way to know what is contained in that memory and where it has been allocated ?
Is there some tool to track down memory usage by line/procedure in a Delphi application ?
Any general advise on how to handle such a problem ?
EDIT 1 : Here are two screenshots of FastMMUsageTracker indicating that memory has been allocate by the system.
Before process starts:
After process ends:
Legend: Light red is FastMM allocated and dark gray is system allocated.
I'd like to understand what is causing the system to use that much memory. Probably by understanding what is contained in that memory or what line of code or procedure did cause that allocation.
EDIT 2 : I'd rather not use the full version of AQTime for multiple reasons:
I'm using multiple virtual machines for development and their licensing system is a PITA (I'm already a registered user of TestComplete)
LITE version doesn't provide enough information and I won't waste money without making certain the FULL version will give me valuable information
Any other suggestions ?
Another problem might be heap fragmentation. This means you have enough memory free, but all the free blocks are to small. You might see it visually by using the source version of FastMM and use the FastMMUsageTracker.pas as suggested here.
You need a profiler, but even that won't be enough in lots of places and cases. Also, in your case, you would need the full featured AQTime, not the lite version that comes with Delphi XE and XE2. (AQTIME is extremely expensive, and annoyingly node-locked, so don't think I'm a shill for SmartBear software.)
The thing is that people often mistake AQTime Allocation Profiler as only a way to find leaks. It can also tell you where your memory goes, at least within the limits of the tool. While running, and consuming lots of memory, I click Run -> Get Results.
Here is one of my applications being profile in AQTime with its Allocation Profiler showing exactly what class is allocating how many instances on the heap and how much memory those use. Since you report low Delphi heap usage with FastMM, that tells me that most of AQTime's ability to analyze by delphi class name will also be useless to you. However by using AQTime's events and triggers, you might be able to figure out what areas of your application are causing you a "memory usage expense" and when those occur, what the expense is. AQTime's real-time instrumentation may be sufficient to help you narrow down the cause even though it might not find for you what function call is causing the most memory usage automatically.
The column names include "Object Name" which includes things like this:
* All delphi classes, and their instance count and heap usage.
* Virtual Memory blocks allocated via Win32 calls.
It can detect Delphi and C/C++ library allocations on the heap, and can see certain Windows-API level memory allocations.
Note the live count of objects, the amount of memory from the heap that is used.
I usually try to figure out the memory cost of a particular operation by measuring heap memory use before, and just after, some expensive operation, but before the cleanup (freeing) of the memory from that expensive operation. I can set event points inside AQTime and when a particular method gets hit or a flag gets turned on by me, I can measure before, and after values, and then compare them.
FastMM alone can not even detect a non-delphi allocation or an allocation from a heap that is not being managed by FastMM. AQTime is not limited in that way.
One old application started to consume memory a lot after server update. Memory usage seems to rise with out limit until program hangs.
According to FastMM4 and EurekaLog, there's no memory leak (except 28 bytes), so I assume all memory is freed when application is shutdown.
Are there any tools or strategies suitable for tracking this kind of memory problem?
Since September 2012, there is a very simple and comfortable way to find this type of "run-time only" memory leaks.
FastMM4991 introduced a new method, LogMemoryManagerStateToFile:
Added the LogMemoryManagerStateToFile call. This call logs a summary of
the memory manager state to file: The total allocated memory, overhead,
efficiency, and a breakdown of allocated memory by class and string type.
This call may be useful to catch objects that do not necessarily leak, but
do linger longer than they should.
To discover the leak at run time, you only need these steps
add a call to LogMemoryManagerStateToFile('memory.log', '') in a place where it will be called in intervals
run the application
open the log file with a tail program (for example BareTail), which will auto-refresh when the file content changes
watch the first lines of the file, they will contain the memory allocations which occupy the highest amount of memory
if you see a class or memory type constantly has a growing number of instances, this can be the reason of your leak
The growing memory consumption is an application issue. It is not a bug, which can discover FastMM4 or EurekaLog. As from they point of view - application just correctly uses the memory.
Using AQTime, MemProof (hard to find, D7 is last supported version (?)), SleuthQA (similar to MemProof) or similar memory profilers, you can track the memory usage outside of application in real-time.
Using FastMM4, GetMemoryManagerState / GetMemoryManagerUsageSummary you can track memory usage from application. Output this information into trace file and analyze it after run. Or make simple wrapping function for one of the above procedures, which will return curent memory usage. And call it from IDE Debugger Evalute / Modify, add to Watches or call OutputDebugString, and see the current memory usage.
Note, if memory is eated by some DLL then you may not see her memory usage using (3). Use (2).
Analyzing the memory usage and the tasks performed by the application, you may discover what leads to raised memory usage.
AQTime (a commercial tool which is quite expensive) can report your memory usage, down to the line of source code that allocated each object. In the case of very large memory usage scenarios, you might want the AQTime functionality that can show the number of objects and the size (total plus individual instance size) for each object. AQTime worked great for me, starting with Delphi 7, and all later versions, including your version (2006) and the latest versions (XE and XE2).
As the program memory usage grows, AQTime can be used to grab "snapshots" of the runtime heap, you can use to understand memory usage of your application; What is being created, and how many of each object exists. Even when no leaks exist, understanding the runtime behaviour of your application in terms of the objects it creates and manages, is very important, and AQTime is the most powerful tool I know of for Delphi users.
If you are willing to upgrade to Delphi XE/XE2, you might have an included light version of AQTime already, if so, check it out. If not, I recommend you try their demo. I am unaware of any free or open source alternatives that can provide the same functionality.
Lesser functionality could be cobbled together manually by writing lots of trace messages, or using the FastMM full-debug-mode. If you could write a complete dump of your memory usage into a very large file, you might be able to write some tools to parse, and create a summary. The problem I have with FastMM in this case, is that you will be drowned in detail information, without the ability to extract exactly the summary information that helps you understand your situation. So, you can try to write your own tool to summarize the memory usage. In one application I had that used a series of components that I knew would use a lot of memory, I wrote a dialog box into my application that showed current memory usage by these large memory-blob-of-data objects.
Have you ever think about the Leak that is causing the IDE... it is so huge!!!
In my case (2GB of RAM) i do the next...
1. Open the IDE
2. Leave it minimized for near six hours
3. See how Physical memory is getting used
The result:
While IDE is oppened (remember i also do the test having it minimized) it is getting more and more RAM... till no more ram free.
It gets all 2GB RAM + all Pagefile hard disk space (i have it configured to a mas of 4GB)
In less that six hours (doing nothing on IDE) it tries to use more than 6GB.
That is called a Memory Leak casused by the IDE... i do not type any letter on IDE, do not compile anything, do not even open any project... just open IDE and minimize it... leave the computer without doing anything on it for about six hours and IDE is consuming 6GB of memory.
Of course, after that, the IDE start with annoying messages of SystemOutOfMemory... and i must kill it... then all that 6GB are freed!!!
When on the hell will this get fixed?
Please note i have all patches applied, i also tested without applying each patch/hotfix, etc...
The best i got was dissabling some options on Tools, like the one that underlines bad code, etc... so why on the hell that option has any influence... i am not typing anything on the IDE (on the tests)... and if i have it dissabled the memory leak gets reduced a lot...
Of course, if i use the IDE (write code on an opened project) without even compiling / running it... the thing goes much more worst... memory leak upto 6GB can got reached on less than an hour, sometimes occurs after 15 minutes of Copy/Paste source code.
Seems there will not be a solution in a short time!!!
So i got the next solution that works perfect:
-Close the IDE an reopen it each 15 minutes or less
Ugly solution, i know... but works!!!
After spending time with FastMM4 in weeding out any pieces of code that could possibly cause memory leak as indicated by FastMM4, we have been test running our software for about a month non-stop on Windows 7. This is what I am seeing so far in the Task Manager for my software process.
> -CPU started out at 1% and 0%. Now it is bouncing around from 2% to 5%
> -VM usage started out at 11,852KB. Now it is at 4,900kb but bouncing
> around from 4,900kb to 5,000kb.
Does this mean we have memory leak in our software? I am confused and concerned.
Thanks in advance,
That sounds like pretty normal memory usage. The program does something that needs memory, and memory usage goes up. The program gets done with what it's doing and releases the memory, and memory usage goes back down. A memory leak is when memory usage goes up and keeps going up because you're not releasing the memory once you're done with it.
If you've got FastMM4, you shouldn't have to hunt around for things that might possibly cause a memory leak. Just turn on Full Debug Mode and the logging option and it will find any memory that leaks when you run it, and write out a file with types and stack traces for you.
No, when memory usage goes up and eventually your application uses all available memory, you have memory leak and reason to be concerned.
Even if an application seems to run fine for days, there still can be memory leaks hidden in code areas which are not (or not frequently) used. So they can be a problem, when this part of the application becomes active some time later.
To make sure that all code is tested for leaks, you can use FastMM4 with unit tests (with DUnit), ensuring to execute as many code paths as possible. Unit test code coverage can be measured for example with this open source Delphi tool, or Discover which recently became open source.
Also, DUnit in the trunk version (9.4.0) supports automatic memory leak detection (based on FastMM4) for every test case.
May be worth to think about the debugger? I've understood that you do not use them. I also had problems with memory leaks. I just had no guessed about it. Now use the "guardian" of the leaks - for me it became deleaker. And you can look such one, that will please you.